저널

Electrolysis for NiW Functional Alloy Plating
NiW 기능성 합금도금을 위한 전해

정구진;이철경;
[Jeong, Goo-Jin;Lee, Churl-Kyoung;]

금오공과대학교 그린에너지인력양성센터;금오공과대학교 신소재시스템공학부;
Green Energy System Center, Kumoh National Institute of Technology;School of Advanced Materials & System Eng., Kumoh National Institute of Technology;

한국표면공학회지, Vol. 44, No. 1, pp. 1-6.

DOI : 10.5695/JKISE.2011.44.1.001

The Effect of Polyethylene Glycol on the Trivalent Chromium Electroplating
Polyethylene glycol이 3가크롬 전기도금에 미치는 효과

이주열;;임성환;한승전;권식철;
[Lee, Joo-Yul;Phuong, Nguyen Van;Lim, Sung-Hwan;Han, Seung-Zeon;Kwon, Sik-Chol;]

한국기계연구원 부설 재료연구소 융합공정연구본부;국립 창원대학교 화학과;강원대학교 신소재공학과;
Materials Processing Division, Korea Institute of Materials Science;Anastro Laboratory, Department of Chemistry, Changwon National University;Microstructure & Materials Design Lab, Department of Advanced Materials Science and Engineering, Kangwon National University;

한국표면공학회지, Vol. 44, No. 1, pp. 7-12.

DOI : 10.5695/JKISE.2011.44.1.007

High-Temperature Oxidation Behavior of Fe-22%Cr-5.8%Al Alloy
Fe-22%Cr-5.8%Al 합금의 고온 산화 거동

김송이;최성환;윤중열;공영민;김병기;이기안;
[Kim, Song-Yi;Choi, Sung-Hwan;Yun, Jung-Yeul;Kong, Young-Min;Kim, Byoung-Kee;Lee, Kee-Ahn;]

안동대학교 신소재공학부;한국기계연구원 부설 재료연구소 기능재료연구본부;울산대학교 첨단소재공학부;
School of Advanced Materials Engineering, Andong National University;Department of Materials Engineering, KIMM;School of Materials Science Engineering, University of Ulsan;

한국표면공학회지, Vol. 44, No. 1, pp. 13-20.

DOI : 10.5695/JKISE.2011.44.1.013

The Joining Quality of High Strength Bolt, Nut and Washer Set (A490) in the Extreme Conditions
극한 상태에서 A490 고장력 볼트 세트의 체결 품질 연구

석한길;조인습;홍현선;
[Suk, Han-Gil;Cho, In-Seup;Hong, Hyeon-Sun;]

강원대학교 재료금속공학과;KPF(주) 품질보증부;고등기술연구원 청정 재료 및 공정기술 연구팀;
Department of Materials and Metallurgical Engineering, Kangwon National University;Qualty Assurance Team, Korea Parts & Fasteners (KPF) Co., Ltd.;Clean Materials/Processing R & D Team, Institute for Advanced Engineering;

한국표면공학회지, Vol. 44, No. 1, pp. 21-25.

DOI : 10.5695/JKISE.2011.44.1.021

Numerical Modeling of Perturbation Effects of Electrostatic Probe into 2D ICP(inductively coupled plasma)
2D-ICP(inductively coupled plasma)에서 정전 탐침 삽입 시의 플라즈마 수치 계산

주정훈;
[Joo, Jung-Hoon;]

군산대학교 공과대학 신소재공학과, 플라즈마 소재 응용 센터;
Department of Materials Science and Engineering and Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 44, No. 1, pp. 26-31.

DOI : 10.5695/JKISE.2011.44.1.026

Surface Treatment Effect on the Toilet by Numerical Modeling and High Speed CCD Camera
수치모델과 고속 CCD 카메라를 이용한 세변기 표면 처리 효과 특성 해석

노지현;도우리;양원균;주정훈;
[Roh, Ji-Hyun;Do, Woo-Ri;Yang, Won-Kyun;Joo, Jung-Hoon;]

군산대학교 공과대학 신소재공학과, 플라즈마 소재 응용 센터;
Department of Materials Science and Engineering and Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 44, No. 1, pp. 32-37.

DOI : 10.5695/JKISE.2011.44.1.032

Surface and Structural Features of a-Si Thin Films Prepared by Various H₂/H₂+SiH₄ Dilution
수소 가스 분율(H₂/H₂+SiH₄)에 따른 비정질 실리콘 박막의 표면 및 구조 분석

권진업;
[Kwon, Jin-Up;]

한국 폴리텍II대학 인천캠퍼스 신소재응용학과;
Dept. of Advanced Material Eng., Incheon Campus Korea Polytechnicll College;

한국표면공학회지, Vol. 44, No. 2, pp. 39-43.

DOI : 10.5695/JKISE.2011.44.2.039

Characteristics of Films Formed on AZ31B Magnesium Alloy by Chemical Oxidation Process in Potassium Permanganate Solution
과망간산칼륨 용액에서 화학적으로 형성된 AZ31B 마그네슘 합금의 피막 특성평가

김민정;김형찬;윤석영;정우창;
[Kim, Min-Jeong;Kim, Hyoung-Chan;Yoon, Seog-Young;Jung, Uoo-Chang;]

한국생산기술연구원 융합부품소재연구그룹;부산대학교 재료공학부;
Korea Institute of Industrial Technology, Convergence Component Material R&D Group;School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 44, No. 2, pp. 44-49.

DOI : 10.5695/JKISE.2011.44.2.044

Deposition of Super Hydrophobic a-C:F Films by Dielectric Barrier Discharge at Atmospheric Pressure

[Kim, Duk-Jae;Kim, Yoon-Kee;Han, Jeon-Geon;]

Geniatech Inc.;Department of Welding and Production Engineering, Hanbat National University;Department of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 44, No. 2, pp. 50-54.

DOI : 10.5695/JKISE.2011.44.2.050

Characteristics of Boronized 316L Austenitic Stainless Steel by Powder Boronizing
분말붕소법을 이용한 오스테나이트계 스테인리스 316L강의 기계적 특성 향상을 위한 연구

차병철;방현배;조형호;정우창;
[Cha, Byung-Chul;Bang, Hyun-Bae;Jo, Hyung-Ho;Jung, Uoo-Chang;]

한국생산기술연구원 동남권기술실용화본부;
Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 44, No. 2, pp. 55-59.

DOI : 10.5695/JKISE.2011.44.2.055

Effects of DC Substrate Bias Power Sources and Reactant Gas Ratio on Synthesis and Tribological Properties of Ternary B-C-N Coatings
기판 바이어스 DC 전원의 종류와 반응가스 분압비가 3성분계 B-C-N 코팅막의 합성과 마찰 특성에 미치는 영향

정다운;김두인;김광호;
[Jeong, Da-Woon;Kim, Doo-In;Kim, Kwang-Ho;]

부산대학교 재료공학과;부산대학교 하이브리드소재 솔루션 국가핵심연구센터;
School of Materials Science and Engineering, Pusan National University;National Core Research Center for Hybrid Materials Solution, Pusan National University;

한국표면공학회지, Vol. 44, No. 2, pp. 60-67.

DOI : 10.5695/JKISE.2011.44.2.060

A Study on Corrosion Resistance and Electrical Surface Conductivity of an Electrodeposited Ni-W Thin Film
전해도금에 의한 Ni-W 합금의 내식성 및 표면 전도도 특성 연구

박제식;정구진;김영준;김기재;이철경;
[Park, Je-Sik;Jeong, Goo-Jin;Kim, Young-Jun;Kim, Ki-Jae;Lee, Churl-Kyoung;]

금오공과대학교 신소재시스템공학부;금오공과대학교 그린에너지시스템센터;전자부품연구원 차세대전지연구센터;
School of Advanced Materials and System Engineering, Kumoh National Institute of Technology;Green Energy System Center, Kumoh National Institute of Technology;Advanced Battery Research Center, Korea Electronics Technology Institute;

한국표면공학회지, Vol. 44, No. 2, pp. 68-73.

DOI : 10.5695/JKISE.2011.44.2.068

Behavior of Initial Formation of Iron Nitride on Carbon Steel at Low Pressure Gas Nitriding
저압가스질화에서 탄소강의 초기 화합물층 형성 거동

김윤기;김상권;
[Kim, Yoon-Kee;Kim, Sang-Gweon;]

한밭대학교 공과대학 신소재공학부;한국생산기술연구원 열표면연구부;
Department of Welding and Production Engineering, Hanbat National University;Surface Engineering and Heat Treatment R&D Division, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 44, No. 3, pp. 75-81.

DOI : 10.5695/JKISE.2011.44.3.075

Characteristics of Environmentally-Friendly Conversion Coating of AZ31 Magnesium Alloy by a Alkaline Phosphate-Permanganate Solution
알카리성 인산-과망간산 용액을 이용한 AZ31 마그네슘 합금의 친환경 화성 처리 및 화성 피막의 특성 평가

김명환;이만식;곽삼탁;문명준;
[Kim, Myung-Hwan;Lee, Man-Sig;Kwag, Sam-Tag;Moon, Myung-Jun;]

부경대학교 화학공학과;한국생산기술연구원;부경대학교 공업화학과;
Department of Chemical Engineering, Pukyong National University;Korea Institute of Industrial Technology [KITECH], Green Technology Center;Department of Industrial Chemistry, Pukyong National University;

한국표면공학회지, Vol. 44, No. 3, pp. 82-88.

DOI : 10.5695/JKISE.2011.44.3.082

Photocurrent Characteristics of Plasma Sprayed TiO₂ Composite Coatings according to Additive Transition Metal
전이금속을 첨가한 플라즈마 TiO₂ 복합 용사피막의 광전류 특성

고병천;고영봉;박경채;
[Ko, Byung-Chun;Ko, Young-Bong;Park, Kyeung-Chaea;]

경북대학교 금속신소재공학과;한국화학융합시험연구원;
School of Materials Science and Metallurgical Engineering, Kyungpook National University;Korea Testing & Research Institute;

한국표면공학회지, Vol. 44, No. 3, pp. 89-94.

DOI : 10.5695/JKISE.2011.44.3.089

Microstructure and Wear Resistance of Ti-Me-N (Me=V, Nb and Si) Nanofilms Prepared by Hybrid PVD
Hybrid PVD로 제조된 Ti-Me-N (Me=V, Si 및 Nb) 나노 박막의 미세구조와 마모특성

양영환;곽길호;이성민;김성원;김형태;김경자;임대순;오윤석;
[Yang, Young-Hwan;Kwak, Kil-Ho;Lee, Sung-Min;Kim, Seong-Won;Kim, Hyung-Tae;Kim, Kyung-Ja;Lim, Dae-Soon;Oh, Yoon-Suk;]

한국세라믹기술원 이천분원 엔지니어링세라믹센터;고려대학교 신소재공학과;
Department of Engineering Ceramic Center, KICET;Department of Materials Science and Engineering, Korea University;

한국표면공학회지, Vol. 44, No. 3, pp. 95-104.

DOI : 10.5695/JKISE.2011.44.3.095

Apparatus on Corrosion Protection and Marine Corrosion of Ship
선박의 해양 부식과 부식방지 장치

김성종;
[Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine System Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 44, No. 3, pp. 105-116.

DOI : 10.5695/JKISE.2011.44.3.105

Spectroscopic and Electrochemical Study on the Citrate-based CuNi Codeposition
구연산 기반 구리-니켈 합금도금에 대한 분광학적/전기화학적 특성 연구

이주열;임성봉;김만;정용수;
[Lee, Joo-Yul;Yim, Seong-Bong;Kim, Man;Jeong, Yong-Soo;]

한국기계연구원 부설 재료연구소 융합공정연구본부;
Materials Processing Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 44, No. 3, pp. 117-123.

DOI : 10.5695/JKISE.2011.44.3.117

Oxidation of Hot Pressed Cr₂AlC Compounds at 900-1200℃ for Up to 50 Hours in Air
열간 압축법으로 제조된 Cr₂AlC 화합물의 900-1200℃, 50시간 동안의 대기중 산화

이동복;
[Lee, Dong-Bok;]

성균관대학교 신소재공학과;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 44, No. 4, pp. 125-130.

DOI : 10.5695/JKISE.2011.44.4.125

A Kinetic Study on the Growth of Nanocrystalline Diamond Particles to Thin Film on Silicon Substrate

[Jung, Doo-Young;Kang, Chan-Hyoung;]

Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 44, No. 4, pp. 131-136.

DOI : 10.5695/JKISE.2011.44.4.131

Effect of Bath Conditions and Current Density on Stress and Magnetic Properties of Ni-Fe Nano Thin Films Synthesized by Electrodeposition Methods
전기도금법으로 제조한 Ni-Fe 나노박막의 스트레스와 자기적 특성에 미치는 용액의 조건 및 전류밀도의 영향

구본급;
[Koo, Bon-Keup;]

한밭대학교 공과대학 신소재공학부;
Division of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 44, No. 4, pp. 137-143.

DOI : 10.5695/JKISE.2011.44.4.137

Electrical and Optical Properties of Ga-doped SnO₂ Thin Films Via Pulsed Laser Deposition

[Sung, Chang-Hoon;Kim, Geun-Woo;Seo, Yong-Jun;Heo, Si-Nae;Huh, Seok-Hwan;Chang, Ji-Ho;Koo, Bon-Heun;]

School of Nano & Advanced Materials Engineering, Changwon National University;Korea FCB Manufacturing Engineering G., Samsung Electro-Mechanics;Major of Semiconductor Physics, Korea Maritime University;

한국표면공학회지, Vol. 44, No. 4, pp. 144-148.

DOI : 10.5695/JKISE.2011.44.4.144

Mechanical Properties of Nitrided STS 431 Martensitic Stainless Steel by the Active Screen Ion Nitriding
활성 스크린 이온질화 처리된 마르텐사이트계 스테인리스 431강의 기계적 특성

방현배;정우창;정원섭;차병철;
[Bang, Hyun-Bae;Jung, Uoo-Chang;Jung, Won-Sub;Cha, Byung-Chul;]

부산대학교 공과대학 재료공학과;한국생산기술연구원 동남권지역본부;
School of Materials Science and Engineering, Pusan National University;Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 44, No. 4, pp. 149-154.

DOI : 10.5695/JKISE.2011.44.4.149

Evaporation Characteristics of Materials from an Electron Beam Evaporation Source
전자빔 증발원을 이용한 물질의 증발 특성

정재인;양지훈;박혜선;정재훈;송민아;
[Jeong, J.I.;Yang, J.H.;Park, H.S.;Jung, J.H.;Song, M.A.;]

포항산업과학연구원 융합소재연구본부;
Hybrid Materials Research Department, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 44, No. 4, pp. 155-164.

DOI : 10.5695/JKISE.2011.44.4.155

A Study on the Holding of LED Sapphire Substrate Using Alumina Electrostatic Chuck with Fine Electrode Pattern
미세 전극 패턴을 갖는 알루미나 정전척을 이용한 LED용 사파이어 기판 흡착 연구

김형주;신용건;안호갑;김동원;
[Kim, Hyung-Ju;Shin, Yong-Gun;Ahn, Ho-Kap;Kim, Dong-Won;]

경기대학교 신소재공학과;이지스코(주);
Department of Advanced Materials Engineering, Kyonggi University;Aegisco Co. Ltd.;

한국표면공학회지, Vol. 44, No. 4, pp. 165-171.

DOI : 10.5695/JKISE.2011.44.4.165

Surface Properties of Chromium Nitrided Carbon Steel as Separator for PEMFC
크롬질화처리한 저탄소강의 고분자 전해질 연료전지 분리판으로서의 표면특성

최창용;강남현;남대근;
[Choi, Chang-Yong;Kang, Nam-Hyun;Nam, Dae-Geun;]

한국생산기술연구원 동남권지역본부;부산대학교 재료공학부;
Korea Institute of Industrial Technology;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 44, No. 5, pp. 173-178.

DOI : 10.5695/JKISE.2011.44.5.173

A Comparative Study of TiN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Sputtering
DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiN 코팅막의 물성 비교연구

전성용;
[Chun, Sung-Yong;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 44, No. 5, pp. 179-184.

DOI : 10.5695/JKISE.2011.44.5.179

Cu₂ZnSnSe₄ Thin Films Preparation by Pulsed Laser Deposition Using Powder Compacted Target

[Kim, Kyoo-Ho;Wibowo, Rachmat Adhi;Alfaruqi, M.Hilmy;Ahn, Jong-Heon;]

Department of Materials Science and Engineering, Yeungnam University;

한국표면공학회지, Vol. 44, No. 5, pp. 185-189.

DOI : 10.5695/JKISE.2011.44.5.185

Study on the Adhesion of Diamond Like Carbon Films Using the Linear Ion Source with Nitriding Layers
Linear Ion Source에 의해 증착된 Diamond-Like Carbon(DLC) 박막의 질화층 형성에 따른 밀착력 특성 연구

신창석;박민석;권아람;김승진;정원섭;
[Shin, Chang-Seouk;Park, Min-Seok;Kwon, Ah-Ram;Kim, Seung-Jin;Chung, Won-Sub;]

부산대학교 공과대학 재료공학과;한국생산기술연구원 동남권지역본부;
Pusan National University;Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 44, No. 5, pp. 190-195.

DOI : 10.5695/JKISE.2011.44.5.190

High-temperature Oxidation of Ni-based Inconel 713 Alloys at 800-1100℃ in Air
니켈기 인코넬 713합금의 800-1100℃에서의 대기중 고온산화

이동복;
[Lee, Dong-Bok;]

성균관대학교 신소재공학부;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 44, No. 5, pp. 196-200.

DOI : 10.5695/JKISE.2011.44.5.196

Corrosion of Fe-2%Mn-0.5%Si Steels at 600-800℃ in N₂/H₂O/H₂S Atmospheres

[Kim, Min-Jung;Park, Sang-Hwan;Lee, Dong-Bok;]

School of Advanced Materials Science and Engineering, Sungkyunkwan University;Functional Materials Center, KIST;

한국표면공학회지, Vol. 44, No. 5, pp. 201-206.

DOI : 10.5695/JKISE.2011.44.5.201

The Change in Diffusion Coefficient and Wear Characteristic in Carbonitriding Layer of SCM415 Steel
침탄질화 처리된 SCM415강의 깊이에 따른 확산 및 마모특성 변화

이수연;윤국태;허석환;이찬규;
[Lee, Su-Yeon;Youn, Kuk-Tea;Huh, Seok-Hwan;Lee, Chan-Gyu;]

창원대학교 금속.신소재공학부;대구기계부품연구원;삼성전기;
Department of Metallurgy & Advanced Materials Engineering, Changwon National University;Daegu Machinery Institute of component & Materials;Samsung electro-mechanics;

한국표면공학회지, Vol. 44, No. 5, pp. 207-212.

DOI : 10.5695/JKISE.2011.44.5.207

Processing of ta-C Protective Films on Mold for Glass Lens
유리렌즈 성형용 금형의 ta-C 보호 필름 제조에 관한 연구

오승근;김영만;
[Oh, Seung-Keun;Kim, Young-Man;]

전남대학교 신소재공학부;
Department of Materials Science and Engineering, Chonnam National University;

한국표면공학회지, Vol. 44, No. 5, pp. 213-219.

DOI : 10.5695/JKISE.2011.44.5.213

The Effect of Coloring Condition on the Surface Characteristic of 304 Stainless Steel
304 스테인리스강의 착색 처리 조건이 표면 특성에 미치는 영향

김기호;
[Kim, Ki-Ho;]

충북대학교 신소재공학과;
Department of New Materials Engineering, Chungbuk National University;

한국표면공학회지, Vol. 44, No. 5, pp. 220-225.

DOI : 10.5695/JKISE.2011.44.5.220

Surface Characteristic of Graphene Coated Stainless Steel for PEMFC Bipolar Plate
그래핀이 코팅된 스테인리스강의 고분자전해질 연료전지 분리판 적용을 위한 표면 특성

이수형;김정수;강남현;조형호;남대근;
[Lee, Su-Hyung;Kim, Jung-Soo;Kang, Nam-Hyun;Jo, Hyung-Ho;Nam, Dae-Guen;]

한국생산기술연구원 정형가공시스템센터;부산대학교 공과대학 재료공학과;
Korea Institute of Industrial Technology, Net-Shape Manufacturing System Center;School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 44, No. 5, pp. 226-231.

DOI : 10.5695/JKISE.2011.44.5.226

CrN and TiN Coatings for the Wear Resistance of Extrusion Mold for Magnesium
마그네슘 압출용 금형의 내마모성 향상을 위한 CrN, TiN 코팅

이수영;김상호;
[Lee, Su-Young;Kim, Sang-Ho;]

한국기술교육대학교 신소재공학과;
Department of Materials Engineering, Korea University of Technology and Education;

한국표면공학회지, Vol. 44, No. 6, pp. 233-238.

DOI : 10.5695/JKISE.2011.44.6.233

Study of Plating Layer Formation of Lightweight Magnesium Alloy (AZ31B)
경량 마그네슘 합금(AZ31B)의 도금층 형성 연구

최경수;최순돈;민봉기;이승현;신현준;
[Choi, Kyoung-Su;Choi, Soon-Don;Min, Bong-Ki;Lee, Seung-Hyeon;Sin, Hyeon-Jun;]

영남대학교 신소재공학부;영남대학교 중앙기기센터;영남이공대학 기계공학과;
School of Materials Science and Engineering, Yeungnam National University, Bo Kwang TS Enterprise Affiliated Laboratory;School of Materials Science and Engineering, Yeungnam National University;Instrumental Analysis Center, Yeungnam National University;Division of mechanical engineering technology, Yeungnam Collage of Science & Technology;

한국표면공학회지, Vol. 44, No. 6, pp. 239-245.

DOI : 10.5695/JKISE.2011.44.6.239

Effect of Heat Treatment on the Adhesive Strength of Electoless Nickel Deposits
무전해법으로 Slide Glass 위에 도금된 Ni층의 접착력에 미치는 열처리의 영향

현영민;유성렬;윤정윤;김보영;김선지;탁송희;김희산;
[Hyun, Yong-Min;Yu, Sung-Yeol;Yoon, Jung-Yun;Kim, Bo-Young;Kim, Sun-Ji;Tahk, Song-Hee;Kim, Hee-San;]

홍익대학교 재료공학부;
School of Material Science & Engineering, Hongik University;

한국표면공학회지, Vol. 44, No. 6, pp. 246-249.

DOI : 10.5695/JKISE.2011.44.6.246

Fabrication and Characteristics of NiO-AZO Thin Films Deposited by Co-sputtering System for GaN LED Transparent Contact Electrode
코스퍼터링법을 이용한 GaN LED 투명접촉전극용 NiO-AZO 박막의 제조 및 물성평가

박희우;방준호;;송풍근;
[Park, Hee-Woo;Bang, Joon-Ho;Hui, Kwun Nam;Song, Pung-Keun;]

부산대학교 재료공학부;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 44, No. 6, pp. 250-254.

DOI : 10.5695/JKISE.2011.44.6.250

The Effect of Thicknesses on Magnetic Properties of Fe-Hf-N Soft Magnetic Thin Films
Fe-Hf-N 연자성 박막의 자기적 특성에 미치는 박막 두께의 영향

최종운;강계명;
[Choi, Jong-Won;Kang, Kae-Myung;]

서울과학기술대학교 신소재공학과;
Department of Materials Science and Engineering, Seoul National University of Science and Technology;

한국표면공학회지, Vol. 44, No. 6, pp. 255-259.

DOI : 10.5695/JKISE.2011.44.6.255

Effect of ITO Layer on Electrical and Optical Properties of GZO/ITO Double-layered TCO Films Deposited by RF Magnetron Sputtering for Application to Solar Cells
RF 마그네트론 스퍼터링법으로 증착한 태양전지용 GZO/ITO 투명전도성 박막의 물성에 미치는 ITO층의 영향

정아로미;송풍근;
[Chung, Ah-Ro-Mi;Song, Pung-Keun;]

부산대학교 재료공학부;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 44, No. 6, pp. 260-263.

DOI : 10.5695/JKISE.2011.44.6.260

The Study on the Electrical Resistivity for Mo Back Contacts Film of CIGS Solar Cell
태양전지 CIGS용 Mo 후면전극의 전기 저항에 관한 연구

김강삼;조용기;
[Kim, Gang-Sam;Cho, Yong-Ki;]

한국생산기술연구원, 뿌리산업기술연구본부, 열.표면연구그룹;
Korea Institute of Industrial Technology, Production Technology R&D Department, Heat Treatment and Surface Engineering R&D Group;

한국표면공학회지, Vol. 44, No. 6, pp. 264-268.

DOI : 10.5695/JKISE.2011.44.6.264

Tribology and Phase Evolution of Cr-Mo-N Coatings with Different Interlayer Condition
중간층 조건에 따른 Cr-Mo-N 막의 상형성 및 마찰마모 거동 연구

양영환;여인웅;박상진;임대순;오윤석;
[Yang, Young-Hwan;Lyo, In-Woong;Park, Sang-Jin;Im, Dae-Sun;Oh, Yoon-Suk;]

한국세라믹기술원 이천분원 엔지니어링세라믹센터;현대.기아 연구개발총괄본부 중앙연구소 기반기술연구팀;현대하이스코 연구개발팀;고려대학교 신소재공학과;
Engineering Ceramic Center, KICET;CAE & Materials Research Team, Central Advanced Research & Engineering Institute, Hyundai & Kia Corporate Research & Development Division;Hyundai Hysco, Research and Development team;Department of Materials Science and Engineering, Korea University;

한국표면공학회지, Vol. 44, No. 6, pp. 269-276.

DOI : 10.5695/JKISE.2011.44.6.269

Cavitation and Electrochemical Characteristics Using Hydrogen Overpotential Method for ALBC3 Alloy
ALBC3 합금의 수소과전압 현상을 이용한 캐비테이션과 전기화학적 특성

박재철;이승준;김성종;
[Park, Jae-Cheul;Lee, Seung-Jun;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine System Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 44, No. 6, pp. 277-283.

DOI : 10.5695/JKISE.2011.44.6.277