FE-SEM Image Analysis of Junction Interface of Cu Direct Bonding for Semiconductor 3D Chip Stacking
[Jaeduk Byun, June Won Hyun*]
Department of Physics, Dankook University, Dandae-ro, Dongnam-gu, Cheonan-si, Chungnam, 31116, Korea
한국표면공학회지, Vol. 54, No. 5, pp. 207-212.
Study on the Fabrication of Various AAO Membranesfor the Application of Li-ion Battery Separator
다양한 형태의 AAO membrane 제조 및 리튬이온 전지의 분리막 응용 연구
김문수†, 임경민†, 하재윤, 김용태*, 최진섭*
[Moonsu Kim†, Kyungmin Lim†, Jaeyun Ha, Yong-Tae Kim*, Jinsub Choi*]
인하대학교 화학공학과
Department of Chemistry and Chemical Engineering, Inha University 22212, 100 Inha-ro, Michuhol-gu, Incheon, Korea
한국표면공학회지, Vol. 54, No. 5, pp. 213-221.
De-icing of the hydrophobic treated nanoporous anodic aluminum oxide layer
소수성 처리된 나노다공성 알루미늄 양극산화피막의 제빙
신예지 1, 김진휘 1, 신동민 1, 문형석 2, 이정훈 1*
[Yeji Shin1, Jinhui Kim1, Dongmin Shin1, Hyung-Seok Moon2, Junghoon Lee1* ]
1 부경대학교 금속공학과, 2 한국생산기술연구원
1Department of Metallurgical Engineering, Pukyong National University, Busan, Republic of Korea 2Energy Plant Group, Korea Institute of Industrial Technology, Busan, Republic of Korea
한국표면공학회지, Vol. 54, No. 5, pp. 222-229.
A Study on Microstructure and Tribological Behavior of Superhard Ti–Al–Si–N Nanocomposite Coatings
초고경도 Ti–Al–Si–N 나노복합체 코팅막의 미세구조 및 트라이볼로지 거동에 관한 연구
허성보, 김왕렬*
[Sung-Bo Heo, Wang Ryeol Kim*]
한국생산기술연구원 첨단하이브리드생산기술센터
Advanced Hybrid Production Technology Center, Korea Institute of Industrial Technology, Yangsan 50635, Republic of Korea
한국표면공학회지, Vol. 54, No. 5, pp. 230-237.
A study on corrosion resistance and surface properties of AZ31 alloy according to Ca-GP addition during PEO treatment
PEO 처리시 Ca-GP첨가에 따른 AZ31합금의 내식성 및 표면특성에 관한 연구
이준수a, 박제신a,b,*, 박일송a,b,*
[Jun-Su Leea, Je-Shin Parka,b,*, Il-Song Parka,b,*]
a전북대학교 금속공학과, b전북대학교 신소재공학부 및 신소재개발연구센터
aDepartment of Metallurgical Engineering, Jeonbuk National University, Jeonju 54896, Republic of Korea bDivision of Advanced Materials Engineering and Research Center for Advanced Materials Development, Jeonbuk National University, Jeonju 54896, Republic of Korea
한국표면공학회지, Vol. 54, No. 5, pp. 238-247.
Effects of post weld heat treatment conditions on localized corrosion resistance of super duplex stainless steel tube used for thermal power plant applications
화력발전용 슈퍼 듀플렉스 스테인리스 강 조관재의 용접 후 열처리 조건이 국부부식 저항성에 미치는 영향
이준호a, 박진성a, 조동민a, 홍승갑b, 김성진a,*
[Jun Ho Leea, Jin sung Parka, Dong Min Choa, Seung Gab Hongb and Sung Jin Kim a,*]
a순천대학교 신소재공학과, b포스코 기술연구원
a Department of Advanced Materials Engineering, Suncheon National University, Jungang-ro, Suncheon 57922, Republic of Korea b POSCO Technical Research Laboratories, Pohang 790-704, Republic of Korea
한국표면공학회지, Vol. 54, No. 5, pp. 248-259.
Synthesis and Characterization of Zinc Oxide Nanorods for Nitrogen Dioxide Gas Detection
[Jong-Hyun Park, Hyojin Kim*]
Department of Materials Science and Engineering, Chungnam National University, Daejeon 34134, Republic of Korea
한국표면공학회지, Vol. 54, No. 5, pp. 260-266.
Formation of compound layers and Wear behavior of AISI4115 steels by gaseous nitriding process
AISI4115 기계구조용 합금강의 질화 가스분위기에 따른 화합물층의 형성 및 내마모특성
김태환1,3, 손석원1,3, 조균택2, 이기안3, 이원범1*
[Taehwan Kim1,3, Seokwon Son1,3, Kyuntaek Cho2, Kee-ahn Lee3, Won-beom Lee1,*]
1한국생산기술연구원 뿌리기술연구소 친환경표면처리연구부문 2한국생산기술연구원 서남본부 동력소재부품연구그룹 3인하대학교 신소재공학과
1Eco-Friendly Thermal Surface Treatment R&D Group, Korea Institute of Industrial Technology(KITECH), Siheung, 15014, korea 2Power materials R&D Group, Korea Institute of Industrial Technology(KITECH), Suncheon, 58022, korea 3Department of Materials Science and Engineering, Inha University, Incheon 22212, Korea
한국표면공학회지, Vol. 54, No. 5, pp. 267-277.
Corrosion Image Monitoring of steel plate by using k-means clustering
k-means 클러스터링을 이용한 강판의 부식 이미지 모니터링
김범수a, 권재성a, 최성웅a, 노정필b, 이경황c, 양정현a*
[Beomsoo Kima, Jaesung Kwona, Sungwoong Choia, Jungpil Nohb, Kyunghwang Leec, Jeonghyeon Yanga*]
a경상국립대학교 기계시스템공학과, b경상국립대학교 에너지기계공학과, c포스코 철강솔루션연구소
aDepartment of Mechanical System Engineering, Gyeongsang National University, Tongyeong, Gyeongnam, 53064, Korea bDepartment of Energy Mechanical Engineering, Gyeongsang National University, Tongyeong, Gyeongnam, 53064, Korea cSteel Solution R&D Center, POSCO, Inchen, 21985, Korea
한국표면공학회지, Vol. 54, No. 5, pp. 278-284.
Characteristics of TiAlCrSiN coating to improve mold life for high temperature liquid molding
고온 액상 성형용 금형 수명 향상을 위한 TiAlCrSiN 코팅의 특성
여기호a, 박은수b, 이한찬b,*
[Ki-Ho Yeoa, Eun-Soo Parkb, Han-Chan Leeb,*]
a한양대학교 금속재료공학과, b(주)이엠엘 R&D 센터
aDepartment of Metallurgical and Materials Engineering, Hanyang University, 15588, Republic of Korea bR&D Center, Eloi MaterialL(EML), Suwon 16229, Republic of Korea
한국표면공학회지, Vol. 54, No. 5, pp. 285-293.