Corrosion Behaviors of Laser-welded Super Duplex Stainless Steel(UNS S32506) Tube with Post-Weld Heat Treatment Conditions
슈퍼 듀플렉스 스테인리스강(UNS S32506) 레이저 조관용접 튜브의 용접 후 열처리에 따른 부식거동
조동민1 · 박진성1 · 홍승갑2 · 황중기3 · 김성진1,*
[Dong Min Cho1, Jin-seong Park1, Seung Gab Hong2, Joong-Ki Hwang3, and Sung Jin Kim1,*]
1순천대학교 신소재공학과, 2포스코 기술연구원, 3동명대학교 기계공학부
1Department of Advanced Materials Engineering, Sunchon National University, Jungang-ro, Suncheon 57922, Republic of Korea 2POSCO Technical Research Laboratories, Donghaean-ro, Pohang 37859, Republic of Korea 3School of Mechanical Engineering, Tongmyong University, Busan 48520, Republic of Korea
한국표면공학회지, Vol. 54, No. 3, pp. 102-111.
Luminescent Properties and Energy Transfer Efficiency of BaWO4:Dy3+, Eu3+ White Light-Emitting Phosphors
BaWO4:Dy3+,Eu3+ 백색광 형광체의 발광 특성과 에너지 전달 효율
조신호
[Shinho Cho*]
신라대학교 신소재공학과
Department of Materials Science and Engineering, Silla University, Busan 46958, Korea
한국표면공학회지, Vol. 54, No. 3, pp. 112-118.
Influence of Ag Interlayer on the Optical and Electrical Properties of SnO2 Thin Films
Ag 중간층이 SnO2 박막의 광학적, 전기적 특성에 미치는 영향
장진규a, 김현진a, 최재욱a, 이연학a, 허성보b, 김유성c, 공영민a*, 김대일a*
[Jin-Kyu Janga, Hyun-Jin Kima, Jae-Wook Choia, Yeon-Hak Leea, Sung-Bo Heob, Yu-Sung Kimc, Young-Min Konga*, Daeil Kima*]
a울산대학교 첨단소재공학부 b한국생산기술연구원 동남본부 에너지소재부품연구그룹 c한국생산기술연구원 울산본부 첨단정형공정그룹
aSchool of Materials Science and Engineering, University of Ulsan, Ulsan 44776, Korea bKorea Institute of Industrial Technology, Yangsan 50635, Korea cKorea Institute of Industrial Technology, Ulsan 44413, Korea
한국표면공학회지, Vol. 54, No. 3, pp. 119-123.
Graphene Growth on the Cobalt and Nickel Sputtered Cu foil Depending on the Annealing Time
코발트와 니켈이 스퍼터링된 구리 포일에서 어닐링 시간에 따른 그래핀 성장
오예찬, 이우진, 김상호*
[Ye-Chan Oh, Woo-Jin Lee, Sang-Ho Kim*]
한국기술교육대학교 에너지신소재화학공학부
School of Energy, Materials & Chemical Engineering Korea University of Technology and Education, Cheonan City, Chungnam, Republic of Korea
한국표면공학회지, Vol. 54, No. 3, pp. 124-132.
Effect of Negative Substrate Bias Voltage on the Microstructure and Mechanical Properties of Nanostructured Ti–Al–N–O Coatings Prepared by Cathodic Arc Evaporation
[Sungbo Heo, Wang Ryeol Kim and In-Wook Park* ]
Korea Institute of Industrial Technology (KITECH), Yangsan 50623, Republic of Korea
한국표면공학회지, Vol. 54, No. 3, pp. 133-138.
Influence of Deposition Temperature on the Film Growth Behavior and Mechanical Properties of Chromium Aluminum Nitride Coatings Prepared by Cathodic Arc Evaporation Technique
[Sungbo Heo and Wang Ryeol Kim* ]
Korea Institute of Industrial Technology (KITECH), Yangsan 50623, Republic of Korea
한국표면공학회지, Vol. 54, No. 3, pp. 139-143.
Preparation and Antibacterial Properties of the Planar-Type ZnO Powder Coated with Ag or CuO
Ag 또는 CuO를 코팅한 평판형 ZnO 분말의 합성 및 항균성 평가
홍다희a, 곽지유a, 전덕성a, 조동현b, 이건섭b, 이정환b, 이희철a,*
[Da-Hee Honga, Ji-Yoo Gwacka, Deock-Seong Jeona, Dong-Hyeon Job, Gun-Sub Leeb, Jung-Hwan Leeb and Hee-Chul Leea,*]
a한국산업기술대학교 신소재공학과, b(주)덕진 에너지사업부 연구소
aDepartment of advanced Materials Engineering, Korea Polytechnic University, Siheung 15073, Korea bEnergy Business Unit, Duckjin Co., Siheung 15078, Korea
한국표면공학회지, Vol. 54, No. 3, pp. 144-151.
Surface observation of Ni(OH)2 nanosheets fabricated by electrodeposition method
전착법에 의해 제작된 Ni(OH)2 나노 시트의 표면 관찰 및 분석
김동연a, 손인준a,*, 최문현b
[Dong Yeon Kima, Injoon Sona,*, Mun-Hyun Choib]
a경북대학교 금속신소재공학전공, b동강테크
aDepartment of Materials Science and Metallurgical Engineering, Kyungpook National University, 41566, Daegu, Republic of Korea bDongkang Tech Corp.,41497, Daegu, Republic of Korea
한국표면공학회지, Vol. 54, No. 3, pp. 152-157.
Introduction of Selective Electrochemical Additive Manufacturing Technology and Consideration of Integration Method for PCB Mass Production Process
선택적 전기화학 3D 프린터 기술 소개 및 PCB 양산공정 적용방식 고찰
김성빈1,*, 유봉영2
[Sung-Bin Kim1,* and Bongyoung Yoo2]
1애니캐스팅, 2한양대학교 재료화학공학과
1AnyCasting Co., Ltd., B-16th FL., Woolim BLDG., 583 Yangcheon-ro, Gangseo-gu, Seoul, Korea 07547 2Dept. of Materials science and chemical engineering, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan-si, Gyeonggi-do, Korea 15588
한국표면공학회지, Vol. 54, No. 3, pp. 158-163.