저널

Property Changes of Ni-Co Film with the Change of Co Concentration in Sulfamate-chloride Bath
Sulfamate-Chloride Bath에서 Co 농도의 변화에 따른 Ni-Co 필름의 특성 변화

윤필근;박덕용;
[Yoon, Pilgeun;Park, Deok-Yong;]

한밭대학교 신소재공학과;
Department of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 53, No. 1, pp. 1-8.

DOI : 10.5695/JKISE.2020.53.1.1

Structural and Optical Properties of CuS Thin Films Grown by RF Magnetron Sputtering
RF 마그네트론 스퍼터링법으로 성장시킨 CuS 박막의 구조적 및 광학적 특성

신동혁;이상운;손창식;손영국;황동현;
[Shin, Donghyeok;Lee, SangWoon;Son, Chang Sik;Son, Young Guk;Hwang, Donghyun;]

부산대학교 재료공학과;신라대학교 신소재공학부;
School of Materials Science and Engineering, Pusan National University;Division of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 53, No. 1, pp. 9-14.

DOI : 10.5695/JKISE.2020.53.1.9

A Study on the Growth and Burning of Anodic Oxide Films on Al6061 Alloy During Anodizing at Constant Voltages
Al6061 합금의 정전압 아노다이징 피막의 형성거동 및 버닝에 대한 연구

문상혁;문성모;송풍근;
[Moon, Sanghyuck;Moon, Sungmo;Song, Pungkeun;]

신원금속(주);재료연구소 표면기술연구본부;부산대학교 재료공학과;
Sinwon Metal;Surface Technology Division, Korea Institute of Materials Science;Materials Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 1, pp. 15-21.

DOI : 10.5695/JKISE.2020.53.1.15

Catalytic Oxidation of CO over Manganese Dioxide Nanoparticles Synthesized Using a High Pressure Homogenizer
고압 균질기를 통해 합성된 이산화망간 나노입자에 의한 일산화탄소의 촉매적 산화

지성화;김효진;
[Ji, Sunghwa;Kim, Hyojin;]

충남대학교 신소재공학과;
Department of Materials Science and Engineering, Chungnam National University;

한국표면공학회지, Vol. 53, No. 1, pp. 22-28.

DOI : 10.5695/JKISE.2020.53.1.22

Effects of Specimen Preparation Method and Contact Resistance on the Formation of Anodizing Films on Aluminum Alloys
시편의 준비 방법 및 접촉저항이 알루미늄 합금의 아노다이징 피막 형성에 미치는 영향

문성모;
[Moon, Sungmo;]

재료연구소 표면기술연구본부;
Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 53, No. 1, pp. 29-35.

DOI : 10.5695/JKISE.2020.53.1.29

Novel Methods for Measuring the Surface Hardness of Anodic Oxide Films on Aluminum Alloy
알루미늄 합금 양극산화피막의 표면경도 측정법

문성모;
[Moon, Sungmo;]

재료연구소 표면기술연구본부;
Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 53, No. 1, pp. 36-42.

DOI : 10.5695/JKISE.2020.53.1.36

Effects of Pre-Aging Treatment on the Corrosion Resistance of Low Temperature Plasma Nitrocarburized AISI 630 Martensitic Precipitation Hardening Stainless Steel
저온 플라즈마 침질탄화처리된 마르텐사이트계 석출경화형 스테인리스강의 내식성에 미치는 시효 전처리의 영향

이인섭;이천호;
[Lee, Insup;Lee, Chun-Ho;]

동의대학교 신소재공학과;
Department of Advanced Materials Engineering, Dongeui university;

한국표면공학회지, Vol. 53, No. 2, pp. 43-52.

DOI : 10.5695/JKISE.2020.53.2.43

Study of PEO Process for Al 7075 and Effect of additives
알루미늄 7075 합금의 PEO 처리 기술 및 첨가제 영향 분석

진연호;양재교;
[Jin, Yun-Ho;Yang, Jae-Kyo;]

고등기술연구원 신소재공정센터;
Advanced Materials & Processing Center, Institute for Advanced Engineering (IAE);

한국표면공학회지, Vol. 53, No. 2, pp. 53-58.

DOI : 10.5695/JKISE.2020.53.2.53

Formation Behavior and Properties of PEO Films on AZ91 Mg Alloy in 0.1 M NaOH + 0.05 M NaF Solution Containing Various Na₂SiO₃ Concentrations
AZ91 마그네슘 합금의 플라즈마 전해산화 피막 형성 및 물성에 미치는 0.1 M NaOH + 0.05 M NaF 용액 중 Na₂SiO₃ 농도의 영향

권두영;송풍근;문성모;
[Kwon, Duyoung;Song, Pung-Keun;Moon, Sungmo;]

재료연구소 표면기술연구본부 전기화학 연구실;부산대학교 재료공학부;
Surface Technology Division, Korea Institute of Materials Science;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 2, pp. 59-66.

DOI : 10.5695/JKISE.2020.53.2.59

Microstrcture and Mechanical Properties of HfN Films Deposited by dc and Inductively Coupled Plasma Assisted Magnetron Sputtering
직류 및 유도결합 플라즈마 마그네트론 스퍼터링법으로 제조된 HfN 코팅막의 미세구조 및 기계적 물성연구

장훈;전성용;
[Jang, Hoon;Chun, Sung-Yong;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 53, No. 2, pp. 67-71.

DOI : 10.5695/JKISE.2020.53.2.67

Study of High Temperature Corrosion Behavior of Fe-Cr Steel in Sewage Sludge-(SO₂-O₂-H₂O-bal. CO₂) mixed Gas Environment
하수슬러지-(SO₂-O₂-H₂O-bal. CO₂) 혼합 가스 분위기에서 Fe-Cr 강의 고온부식거동 연구

김민정;박주창;유인선;
[Kim, Min Jung;Park, Joo Chang;Ryu, In Sun;]

성균관대학교 신소재공학과;아주대학교 에너지시스템학과;한국폴리텍대학 신소재응용과;
School of Advanced Materials Science and Engineering, Sungkyunkwan University;Department of Energy Systems Research, Ajou University;3 Department of Advanced Material, Korea polytechnic;

한국표면공학회지, Vol. 53, No. 2, pp. 72-79.

DOI : 10.5695/JKISE.2020.53.2.72

Surface Hardness Measurement of Anodic Oxide Films on AA2024 based an Ink-Impregnation Method

[Moon, Sungmo;Rha, Jong-joo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 53, No. 2, pp. 80-86.

DOI : 10.5695/JKISE.2020.53.2.80

Fast and Soft Functionalization of Carbon Nanotube with -SO₃H, -COOH, -OH Groups for Catalytic Hydrolysis of Cellulose to Glucose

[Lusha, Qin;Lee, Sungho;Li, Oi Lun;]

School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 3, pp. 87-94.

DOI : 10.5695/JKISE.2020.53.3.87

Development of High Erosion Resistant Fe-based Alloy for Continuous Hot Dipping Line
연속용융 도금라인 용 고내침식 Fe계 합금 개발

백민숙;김용철;백경철;곽준섭;윤동주;
[Baek, Min-Sook;Kim, Yong-Cheol;Baek, Kyeong-Cheol;Kwak, Joon-Seop;Yoon, Dong-Joo;]

순천대학교 RIC;(주)삼우에코;
Center for Practical Use of Rare Materials, Sunchon National University;SAMWOO ECO., LTD.;

한국표면공학회지, Vol. 53, No. 3, pp. 95-103.

DOI : 10.5695/JKISE.2020.53.3.95

Influence of Au Interlayer Thickness on the Opto-Electrical Properties of ZnO Thin Films
Au 층간박막 두께에 따른 ZnO 박막의 전기광학적 특성 변화

박윤제;최수현;김유성;차병철;공영민;김대일;
[Park, Yun-Je;Choe, Su-Hyeon;Kim, Yu-Sung;Cha, Byung-Chul;Gong, Young-Min;Kim, Daeil;]

울산대학교 첨단소재공학부;한국생산기술연구원 첨단정형공정그룹;
School of Materials Science and Engineering, University of Ulsan;Advanced Forming Processes R&D Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 53, No. 3, pp. 104-108.

DOI : 10.5695/JKISE.2020.53.3.104

Characteristics of a Polycrystalline Diamond Thin Film Deposited on a-plane Sapphire Substrate
a-plane 사파이어기판에 증착된 Polycrystalline Diamond 박막의 특성

싱얀탄;장태환;권진욱;김태규;
[Tan, Xing Yan;Jang, Tae Hwan;Kwon, Jin Uk;Kim, Tae Gyu;]

부산대학교 나노융합기술학과;부산대학교 나노메카트로닉스공학과;
Department of Nano Fusion Technology, Pusan National University;Department of Nanomechatronics Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 3, pp. 109-115.

DOI : 10.5695/JKISE.2020.53.3.109

Effect of Argon Ion Beam Incident Angle on Self-Organized Nanostructure on the Surface of Polyethylene Naphthalate Film
알곤 이온빔 입사각에 따른 Polyethylene Naphthalate 필름 표면의 자가나노구조화 분석

조경환;양준영;변은연;박영배;정성훈;김도근;이승훈;
[Joe, Gyeonghwan;Yang, Junyeong;Byeon, Eun-Yeon;Park, Young-Bae;Jung, Sunghoon;Kim, Do-Geun;Lee, Seunghun;]

재료연구소 표면기술연구본부;안동대학교 신소재공학부 청정에너지소재기술연구센터;
Surface Technology Division, Korea Institute of Materials Science;School of Materials Science and Engineering, Andong National University;

한국표면공학회지, Vol. 53, No. 3, pp. 116-123.

DOI : 10.5695/JKISE.2020.53.3.116

Development of Space Divided PE-ALD System and Process Design for Gap-Fill Process in Advanced Memory Devices
차세대 메모리 디바이스Gap-Fill 공정 위한 공간 분할 PE-ALD개발 및 공정 설계

이백주;황재순;서동원;최재욱;
[Lee, Baek-Ju;Hwang, Jae-Soon;Seo, Dong-Won;Choi, Jae-Wook;]

(주)한화 / 기계 부분 연구소;
Machinery R&D Center, Hanwha Corporation;

한국표면공학회지, Vol. 53, No. 3, pp. 124-129.

DOI : 10.5695/JKISE.2020.53.3.124

Structural and Luminescent Properties of Gd₂WO₆:RE³⁺ (RE = Dy, Sm, Dy/Sm) Phosphors for White Light Emitting Devices
백색광 소자 응용을 위한 Gd₂WO₆:RE³⁺ (RE = Dy, Sm, Dy/Sm) 형광체의 구조 및 발광 특성

박기원;정재용;조신호;
[Park, Giwon;Jung, Jaeyong;Cho, Shinho;]

신라대학교 신소재공학부;
Division of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 53, No. 4, pp. 131-137.

DOI : 10.5695/JKISE.2020.53.4.131

The Micro Coil Production through Research on the Additive Conditions of Electrochemical Metal 3D Printer
전기화학적 금속 3D 프린터의 적층 조건 연구를 통한 마이크로 코일 제작

김영국;강동화;김성빈;유봉영;
[Kim, Young-Kuk;Kang, Donghwa;Kim, Sung-Bin;Yoo, Bongyoung;]

애니캐스팅;한양대학교 재료화학공학과;
Anycasting;Dept. of Materials and Chemical Engineering, Hanyang University;

한국표면공학회지, Vol. 53, No. 4, pp. 138-143.

DOI : 10.5695/JKISE.2020.53.4.138

Improvement of joining strength between aluminum alloy and polymer by two - step anodization

[Lee, Sung-Hyung;Yashiro, Hitoshi;Kure-Chu, Song-Zhu;]

Gakko hojin Kitahara gakuen;Department of Chemistry and Biological Science, Iwate University;Materials Function and Design, Nagoya Institute of Technology;

한국표면공학회지, Vol. 53, No. 4, pp. 144-152.

DOI : 10.5695/JKISE.2020.53.4.144

Photocatalytic decomposition of polyethylene composite film with TiO₂ nanotube powders prepared by rapid breakdown anodization
급속 파괴 양극산화로 제조된 TiO₂ 나노 튜브 분말을 활용한 폴리에틸렌 복합 필름의 UV 광촉매 분해

임경민;김용태;최진섭;
[Lim, Kyungmin;Kim, Yong-Tae;Choi, Jinsub;]

인하대학교 화학공학과;
Department of Chemistry and Chemical Engineering, Inha University;

한국표면공학회지, Vol. 53, No. 4, pp. 153-159.

DOI : 10.5695/JKISE.2020.53.4.153

Fabrication and characterization of polymer-based carbon nanomaterial composites for thermal conductive adhesive application
열전도성 점착제 응용을 위한 고분자 기반 탄소나노소재 복합체 제조 및 특성 평가

이병주;조성일;윤은혜;이애리;이우영;허성규;황재성;정구환;
[Lee, Byeong-Joo;Jo, Sung-Il;Yoon, Eun-Hye;Lee, Ae-Ri;Lee, Woo-Young;Heo, Sung-Gyu;Hwang, Jae-Sung;Jeong, Goo-Hwan;]

강원대학교 대학원 신소재공학과;(주)태양 3C;
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University;Taeyang 3C;

한국표면공학회지, Vol. 53, No. 4, pp. 160-168.

DOI : 10.5695/JKISE.2020.53.4.160

A brief review on the effect of impurities on the atomic layer deposited fluorite-structure ferroelectrics
원자층증착법으로 증착된 강유전성 플루오라이트 구조 강유전체 박막의 불순물 효과

이동현;양건;박주용;박민혁;
[Lee, Dong Hyun;Yang, Kun;Park, Ju Yong;Park, Min Hyuk;]

부산대학교 재료공학부;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 4, pp. 169-181.

DOI : 10.5695/JKISE.2020.53.4.169

Preparation and characterization of silver nanowire transparent electrodes using shear-coating
Shear-coating을 사용한 은 나노와이어 투명 전극 제조 및 특성 분석

조경수;홍기하;박준식;정중희;
[Cho, Kyung Soo;Hong, Ki-Ha;Park, Joon Sik;Chung, Choong-Heui;]

한밭대학교 공과대학 소재시스템공학과;한밭대학교 공과대학 신소재공학과;
Department of Materials and Manufacturing Engineering, Hanbat National University;Department of Materials Science and Engineering, Hanbat National University;

한국표면공학회지, Vol. 53, No. 4, pp. 182-189.

DOI : 10.5695/JKISE.2020.53.4.182

Influence of Applied Current Density on Properties of Cu thin layer Electrodeposited from Copper Pyrophosphate Bath
피로인산동 도금용액으로부터 전기도금 된 Cu 도금층의 물성에 미치는 인가전류밀도의 영향

윤필근;박덕용;
[Yoon, Pilgeun;Park, Deok-Yong;]

한밭대학교 신소재공학과;
Department of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 53, No. 4, pp. 190-199.

DOI : 10.5695/JKISE.2020.53.4.190

Anti-corrosion Properties of SiOxCy(-H) thin Films Synthesized and Oxidized by Atmospheric Pressure Dielectric Barrier Discharge
대기압 유전체배리어방전으로 합성 및 산화 처리된 SiOxCy(-H) 박막의 부식방지 특성

김기택;김윤기;
[Kim, Gi-Taek;Kim, Yoon Kee;]

한밭대학교 신소재공학과;
Department of Materials and Manufacturing Engineering, Hanbat National University;

한국표면공학회지, Vol. 53, No. 5, pp. 201-206.

DOI : 10.5695/JKISE.2020.53.5.201

Effect of ICCP Potential with Electrolyte on Corrosion and Discolor of Silver
은의 부식 및 변식에 미치는 전해질 용액에 따른 ICCP 전압의 영향

신병현;김도형;정원섭;
[Shin, Byung-Hyun;Kim, Do-Hyung;Chung, Won-Sub;]

부산대학교, 재료공학과, 소재기술연구소;부산대학교, 재료공학과;
Departments of Materials Science and Engineering, Pusan National University;The Institute of Materials Technology, Departments of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 5, pp. 207-212.

DOI : 10.5695/JKISE.2020.53.5.207

Electrochemical Property of the Composite Electrode with Graphene Balls and Graphene Oxide for Supercapacitor
슈퍼커패시터용 그래핀볼 - 그래핀옥사이드 복합전극의 전기화학적 특성

정우준;오예찬;김상호;
[Jeong, Woo-Jun;Oh, Ye-Chan;Kim, Sang-Ho;]

한국기술교육대학교 에너지신소재화학공학과;
School of Energy, Materials & Chemical Engineering Korea University of Technology and Education;

한국표면공학회지, Vol. 53, No. 5, pp. 213-218.

DOI : 10.5695/JKISE.2020.53.5.213

Effect on Anodizing Oxide Film for Aluminum 6061-T6 Alloy on Corrosion and Stress Corrosion Cracking in Seawater
알루미늄 6061-T6 합금에 대한 양극산화층이 해수 내 부식 및 응력부식균열에 미치는 영향

신동호;황현규;정광후;김성종;
[Shin, Dong-Ho;Hwang, Hyun-kyu;Jung, Kwang-Hu;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학과 대학원;한국해양수산연수원 해사안전교육팀;목포해양대학교 기관시스템공학부;
Division of marine engineering, Graduate school, Mokpo national maritime university;Maritime safety training team, Korea institute of maritime and fisheries technology;Division of marine engineering, Mokpo national maritime university;

한국표면공학회지, Vol. 53, No. 5, pp. 219-226.

DOI : 10.5695/JKISE.2020.53.5.219

Effects of Stainless Steel Plate-Patterns on the Thermal Distortion and Surface Temperature of Aluminum Frypan
알루미늄 프라이팬에 부착된 스텐리스판의 패턴이 열 변형 및 표면온도에 미치는 영향

문성모;윤명식;
[Moon, Sungmo;Yoon, Myungsik;]

재료연구소 표면기술연구본부;(주)쓰리바바;
Surface Technology Division, Korea Institute of Materials Science;Three Baba Co.;

한국표면공학회지, Vol. 53, No. 5, pp. 227-231.

DOI : 10.5695/JKISE.2020.53.5.227

Photoelectrochemical Properties of Electrodeposited Cu₂O Photocathode with Tailored Microstructures
미세구조가 제어된 전해도금 Cu₂O 광양극의 광전기화학 특성

정다솔;조우현;정재범;정현성;
[Jeong, Dasol;Jo, Woohyeon;Jeong, Jaebum;Jung, Hyunsung;]

한국세라믹기술원 나노소재공정센터;
Nano Materials & Nano Technology Center, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 53, No. 5, pp. 232-240.

DOI : 10.5695/JKISE.2020.53.5.232

Diamond Crystal Growth Behavior by Hot Filament Chemical Vapor Deposition According to Pretreatment Conditions

[Song, Chang Weon;You, Mi Young;Lee, Damin;Mun, Hyoung Seok;Kim, Seohan;Song, Pung Keun;]

The Institute of Materials Technology, Pusan National University;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 5, pp. 241-248.

DOI : 10.5695/JKISE.2020.53.5.241

A Study on the Properties of Anodic Oxide Films Formed on Al Alloys in Oxalic Acid
알루미늄 합금 소재의 옥살산 아노다이징 피막 물성 연구

정나겸;박지현;
[Jeong, Nagyeom;Park, Jihyun;]

영광YKMC 기술연구소;
R&D center, YKMC Inc.;

한국표면공학회지, Vol. 53, No. 5, pp. 249-256.

DOI : 10.5695/JKISE.2020.53.5.249

Preparation of Anodic Iron Oxide Composite Incorporated with WO₃ on the Stainless Steel Type-304 Substrate Through a Single-step Anodization
단일공정 양극산화를 이용한 WO₃가 복합된 304 스테인레스 강 산화 피막 제조

김문수;이재원;이기영;김용태;최진섭;
[Kim, Moonsu;Lee, Jaewon;Lee, Kiyoung;Kim, Yong-Tae;Choi, Jinsub;]

인하대학교 화학공학과;경북대학교 미래과학기술융합학과;
Department of Chemistry and Chemical Engineering, Inha University;Department of Advanced Science and Technology, Kyungpook National University;

한국표면공학회지, Vol. 53, No. 5, pp. 257-264.

DOI : 10.5695/JKISE.2020.53.5.257

Mechanochemistry on Self-Assembled Monolayer(SAM) /Electrodes after Contacting with Polymeric Stamp
고분자물질과 접촉한 자기조립단분자막 전극 물질의 기계화학 현상 분광학적 연구

윤창석;
[Yun, Changsuk;]

신소재화학과, 고려대학교 세종캠퍼스;
Department of Advanced Materials Chemistry, Korea University;

한국표면공학회지, Vol. 53, No. 5, pp. 265-270.

DOI : 10.5695/JKISE.2020.53.5.265

A Study on the Improvement of Tool`s Life by Applying DLC Sacrificial Layer on Nitride Hard Coated Drill Tools
드릴공구의 이종질화막상 DLC 희생층 적용을 통한 공구 수명 개선 연구

강용진;김도현;장영준;김종국;
[Kang, Yong-Jin;Kim, Do Hyun;Jang, Young-Jun;Kim, Jongkuk;]

한국재료연구원 표면재료연구본부 극한환경코팅연구실;
Surface Technology Division, Korea Institute of Materials Science(KIMS);

한국표면공학회지, Vol. 53, No. 6, pp. 271-279.

DOI : 10.5695/JKISE.2020.53.6.271

Effect of Electron Irradiation on the Titanium Aluminium Nitride Thick Films
Titanium Aluminium Nitride 후막의 전자-빔 조사 효과

최수현;허성보;공영민;김대일;
[Choe, Su-Hyeon;Heo, Sung-Bo;Kong, Young-Min;Kim, Daeil;]

울산대학교 첨단소재공학부;한국생산기술연구원, 첨단하이브리드생산기술센터;
School of Materials Science and Engineering, University of Ulsan;Functional Components & Materials Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 53, No. 6, pp. 280-284.

DOI : 10.5695/JKISE.2020.53.6.280

Sterilization of Bacteria and Fungi in Cultural Heritages using Atmospheric Pressure Plasma Jet System
대기압 플라즈마 제트 시스템을 이용한 문화재 내 세균류 및 진균류의 살균

조성일;박동민;이병훈;소명기;하석진;정구환;
[Jo, Sung-Il;Park, Dong-Min;Lee, Byeong Hoon;So, Myoung-Gi;Ha, Suk-Jin;Jeong, Goo-Hwan;]

강원대학교 대학원 신소재공학과;강원대학교 대학원 생물공학과;강원도문화재연구소;
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University;Department of Bioengineering and Technology, Graduate School of Kangwon National University;Kangwon Research Institute of Cultural Heritage;

한국표면공학회지, Vol. 53, No. 6, pp. 285-292.

DOI : 10.5695/JKISE.2020.53.6.285

Study on the Compositional Characteristics of the PCS Coating Layer by Curing Treatment for the Protection of Graphite Mold Surface
흑연 금형 표면 보호용 PCS 코팅층의 열경화에 의한 조성비 조절 특성 연구

김경호;이윤주;신윤지;정성민;이명현;배시영;
[Kim, Kyoung-Ho;Lee, Yoonjoo;Shin, Yun-Ji;Jeong, Seong-Min;Lee, Myung-Hyun;Bae, Si-Young;]

한국세라믹기술원 에너지환경본부;
Energy and Environmental Division, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 53, No. 6, pp. 293-299.

DOI : 10.5695/JKISE.2020.53.6.293

Enhancement of Corrosion Resistance of Steel Reinforcement in Concrete by Hydrophobic Surface Treatments
콘크리트의 소수성 표면처리를 통한 철강 보강재의 내식성 향상

조현빈;신동민;서은혜;이욱진;이정훈;
[Jo, Hyunbin;Shin, Dongmin;Seo, Eunhye;Lee, Wookjin;Lee, Junghoon;]

부경대학교 금속공학과;한국생산기술연구원;
Department of Metallurgical Engineering, Pukyong National University;Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 53, No. 6, pp. 300-305.

DOI : 10.5695/JKISE.2020.53.6.300

Mechanical Properties of DLC Films and Duplex Plasma Nitriding/DLC Coating Treatment Process
DLC 박막과 복합처리(Nitriding/DLC)한 박막의 기계적 특성 비교

박현준;김민채;김상섭;문경일;
[Park, Hyun-Jun;Kim, Min-Chae;Kim, Sang-Sub;Moon, Kyoung-Il;]

한국생산기술연구원;(주)일렉트로엠;인하대학교 신소재공학과;
Heat Treatment R&D Group, Korea Institute of Industrial Technology;Dongbu electronic materials Co., Ltd.;Department of Materials Science and Engineering, Inha University;

한국표면공학회지, Vol. 53, No. 6, pp. 306-311.

DOI : 10.5695/JKISE.2020.53.6.306

Preparation of Porous Cobalt Thin Films by Using an Electrochemical Method
전기화학적 방법을 통한 다공성 코발트 박막 합성

하성혁;신헌철;
[Ha, Seong-Hyeok;Shin, Heon-Cheol;]

부산대학교 재료공학부;
School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 6, pp. 312-321.

DOI : 10.5695/JKISE.2020.53.6.312

Corrosion Characteristics of Aluminum Die Casting Alloys with Different Scrap Charge Rate
스크랩 장입 비율에 따른 다이캐스팅용 알루미늄 합금의 부식 특성

김준호;이승효;
[Kim, Jun-Ho;Lee, Seung-Hyo;]

한국해양대학교 해양신소재융합공학과;
Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 53, No. 6, pp. 322-329.

DOI : 10.5695/JKISE.2020.53.6.322

A Brief Review on Polarization Switching Kinetics in Fluorite-structured Ferroelectrics
플루오라이트 구조 강유전체 박막의 분극 반전 동역학 리뷰

김세현;박근형;이은빈;유근택;이동현;양건;박주용;박민혁;
[Kim, Se Hyun;Park, Keun Hyeong;Lee, Eun Been;Yu, Geun Taek;Lee, Dong Hyun;Yang, Kun;Park, Ju Yong;Park, Min Hyuk;]

부산대학교 산학협력단 기술사업부;부산대학교 재료공학부;
Technology Licensing Office, Institute for Research & Industry Cooperation, Pusan National University;School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 6, pp. 330-342.

DOI : 10.5695/JKISE.2020.53.6.330

Mechanical Properties of MoN-Cu Coatings according to Pre-treatment of AISI H13 Tool Steel
H13 공구강의 전처리에 따른 Mo-Cu-N 코팅의 기계적 특성

박현준;문경일;김상섭;
[Park, Hyun-Jun;Moon, Kyoung-Il;Kim, Sang-Sub;]

한국생산기술연구원 열처리그룹;인하대학교 신소재공학과;
Heat Treatment R&D Group, Korea Institute of Industrial Technology;Department of Materials Science and Engineering, Inha University;

한국표면공학회지, Vol. 53, No. 6, pp. 343-350.

DOI : 10.5695/JKISE.2020.53.6.343

Effect of Na₃PO₄ Concentration on the Formation Behavior and Properties of PEO Films on AA2024
알루미늄 2024 합금의 플라즈마 전해산화 피막의 형성 거동 및 피막 물성에 미치는 인산나트륨 농도의 영향

김주석;신헌철;문성모;
[Kim, Juseok;Shin, Heon-cheol;Moon, Sungmo;]

한국재료연구원 표면재료연구본부;부산대학교 재료공학부;
Surface Materials Division, Korea Institute of Materials Science;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 6, pp. 351-359.

DOI : 10.5695/JKISE.2020.53.6.351

Enhanced Wear Resistance of Cutting Tools Using Multilayer ta-C Coating
다층막 ta-C 코팅 적용을 통한 절삭공구의 내마모성 향상

김도현;강용진;장영준;김종국;
[Kim, Do Hyun;Kang, Yong-Jin;Jang, Young-Jun;Kim, Jongkuk;]

한국재료연구원, 표면재료연구본부;
Surface technology division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 53, No. 6, pp. 360-368.

DOI : 10.5695/JKISE.2020.53.6.360