저널

First Principles Computational Study of Surface Reactions Toward Design Concepts of High Functional Electrocatalysts for Oxygen Reduction Reaction in a Fuel Cell System

[Hwang, Jeemin;Noh, Seunghyo;Kang, Joonhee;Han, Byungchan;]

Department of Chemical and Biomolecular Engineering, Yonsei University;

한국표면공학회지, Vol. 50, No. 1, pp. 1-9.

DOI : 10.5695/JKISE.2017.50.1.1

Lateral Growth of PEO Films on Al1050 Alloy in an Alkaline Electrolyte

[Moon, Sungmo;Kim, Yeajin;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 1, pp. 10-16.

DOI : 10.5695/JKISE.2017.50.1.10

PEO Film Formation Behavior of Al1050 Alloy Under Direct Current in an Alkaline Electrolyte

[Moon, Sungmo;Kim, Yeajin;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 1, pp. 17-23.

DOI : 10.5695/JKISE.2017.50.1.17

A Study on Properties of Electrodeposited Nickel-Cobalt Alloy Films from Sulfamate Solution
설파민산 니켈-코발트 합금도금 박막 물성에 대한 실험 연구

구석본;전준미;이창면;허진영;이홍기;
[Koo, Seokbon;Jeon, Junmi;Lee, Changmyeon;Hur, Jinyoung;Lee, HongKee;]

한국생산기술연구원 표면처리그룹;
Surface R&D Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 50, No. 1, pp. 24-28.

DOI : 10.5695/JKISE.2017.50.1.24

Effects of Ni Concentration on Residual Stress in Electrodeposited Ni Thin Film for ⁶³Ni Sealed Source
⁶³Ni 밀봉선원용 Ni 전기도금 박막에서 Ni 농도가 잔류응력에 미치는 영향

윤필근;박덕용;
[Yoon, Pilgeun;Park, Deok-Yong;]

한밭대학교 신소재공학과;
Department of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 50, No. 1, pp. 29-34.

DOI : 10.5695/JKISE.2017.50.1.29

Corrosion Properties of Atomic Layer Deposited TiO₂, Al₂O₃ and TiO₂-Al₂O₃ Nanolaminated Film Coated 316L Stainless Steel
원자층 증착법에 의한 TiO₂, Al₂O₃, 및 TiO₂-Al₂O₃ 나노라미네이트 박막이 316L Stainless Steel의 부식특성에 미치는 영향

이우재;만지흠;김다영;장경수;최현진;최우창;권세훈;
[Lee, Woo-Jae;Wan, Zhixin;Kim, Da Young;Jang, Kyung Su;Choi, Hyun-Jin;Choi, Woo-Chang;Kwon, Se Hun;]

부산대학교, 재료공학부;(주)서영, 나노융합사업팀;부산테크노파크, 멤스나노부품생산센터;
School of Materials Science and Engineering, Pusan National University;Nano Convergence Team, Seo Yeong Co. Ltd.;MEMS/NANO Component Production Center, Busan Techno Park;

한국표면공학회지, Vol. 50, No. 1, pp. 35-41.

DOI : 10.5695/JKISE.2017.50.1.35

High Temperature Oxidation Behavior of Mg-6%Al-1%Zn-1%CaO Alloys

[Lee, Dong Bok;Kim, Min Jung;]

School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 50, No. 1, pp. 42-45.

DOI : 10.5695/JKISE.2017.50.1.42

Physical Chemistry of Eh-pH Diagram
전위 - pH 도표의 물리화학

이규환;
[Lee, Kyu Hwan;]

한국기계연구원 부설 재료연구소 표면기술연구본부;
Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 1, pp. 46-54.

DOI : 10.5695/JKISE.2017.50.1.46

Application and Processes for Sputtered ITO Films
스퍼터 ITO박막의 제조 공정 이해 및 활용

송풍근;
[Song, Pung-Keun;]

부산대학교 재료공학부;
Department of materials science and engineering, Pusan National University;

한국표면공학회지, Vol. 50, No. 2, pp. 55-71.

DOI : 10.5695/JKISE.2017.50.2.55

Effects of Surface Pretreatment on Deposition and Adhesion of Electrophoretic Paint on AZ31 Mg Alloy

[Nguyen, Van Phuonga;Moon, Sungmo;]

Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 2, pp. 72-84.

DOI : 10.5695/JKISE.2017.50.2.72

Corrosion of Carbon Steel with and without Aluminized Coating in (O, S, H)-containing Gases at 500-800℃

[Lee, Dong Bok;Abro, Waheed Ali;Lee, Kun Sang;Abro, Muhammad Ali;]

School of Advanced Materials Science & Engineering, Sungkyunkwan University;Department of Earth Resources and Environmental Engineering, Hanyang University;

한국표면공학회지, Vol. 50, No. 2, pp. 85-90.

DOI : 10.5695/JKISE.2017.50.2.85

Corrosion Characteristics of 16Cr-10Ni-2Mo Stainless Steel with Plasma Ion Nitriding Temperatures by Galvanostatic Experiment
16Cr-10Ni-2Mo 스테인리스강의 정전류 실험에 의한 플라즈마 이온질화 온도 변수에 따른 부식 특성

정상옥;김성종;
[Chong, Sang-Ok;Kim, Seong-Jong;]

디엔브이지엘;목포해양대학교 기관시스템공학부;
Division of Maritime, DNV GL;Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 50, No. 2, pp. 91-97.

DOI : 10.5695/JKISE.2017.50.2.91

Hydrogen Perm-Selectivity Property of the Palladium Hydrogen Separation Membranes on Porous Stainless Steel Support Manufactured by Metal Injection Molding
금속 사출성형 방식의 다공성 스테인리스 강 지지체에 형성된 팔라듐 수소 분리막의 투과 선택도 특성

김세홍;양지혜;임다솔;김동원;
[Kim, Se-Hong;Yang, Ji-Hye;Lim, Da-Sol;Kim, Dong-Won;]

경기대학교 신소재공학과;
Department of Advanced Materials Engineering, Kyonggi University;

한국표면공학회지, Vol. 50, No. 2, pp. 98-107.

DOI : 10.5695/JKISE.2017.50.2.98

Effect of Graphite Electrode Geometry and Combination on Nanocarbon Synthesis using Underwater Discharge Plasma
수중 방전 플라즈마를 이용한 탄소나노소재 합성 시 흑연전극의 형상과 조합의 영향

조성일;이병주;정구환;
[Jo, Sung-Il;Lee, Byeong-Joo;Jeong, Goo-Hwan;]

강원대학교 대학원 신소재공학과;강원대학교 대학원 신소재공학과강원대학교 공과대학 나노응용공학과;
Department of Advanced Materials Science and Engineering, Graduate School of Kangwon National University;

한국표면공학회지, Vol. 50, No. 2, pp. 108-113.

DOI : 10.5695/JKISE.2017.50.2.108

Spherical Bi₂Te₃ Powder Synthesized by Oxide-Reduction Process via Ultrasonic Spray Pyrolysis
초음파 분무 열분해법에 의한 산화물 환원 공정의 구형 Bi₂Te₃ 분말 합성

송철한;장대환;진연호;공만식;
[Song, Chul-Han;Jang, Dae-Hwan;Jin, Yun-Ho;Kong, Man-Sik;]

고등기술연구원 신소재공정센터;
Advanced Materials & Processing Center, Institute for Advanced Engineering (IAE);

한국표면공학회지, Vol. 50, No. 2, pp. 114-118.

DOI : 10.5695/JKISE.2017.50.2.114

A Study on Structure and Magnetic Properties of Fe-N Thin Films with Different DC Magnetron Sputtering Power and Time
증착 Power의 세기와 시간에 따른 Fe-N 박막의 구조와 자성 특성

한동원;박원욱;김종우;권아람;
[Han, Dong-Won;Park, Won-Uk;Kim, Jong-Woo;Kwon, Ah-Ram;]

인제대학교 에너지융합학과;재료연구소;한국생산기술연구원 동남지역본부;
Department of Energy Fusion Technology, Inje University;Korea Institute of Materials Science;Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 50, No. 2, pp. 119-124.

DOI : 10.5695/JKISE.2017.50.2.119

Enhanced Hydrogen Gas Sensing Properties of ZnO Nanowires Gas Sensor by Heat Treatment under Oxygen Atmosphere
산소 분위기 열처리에 따른 ZnO 나노선의 상온 영역에서의 수소가스 검출 특성 향상

강우승;
[Kang, Wooseung;]

인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 50, No. 2, pp. 125-130.

DOI : 10.5695/JKISE.2017.50.2.125

Formation of Metallic Nanoparticles Using Potential-pH Diagram
전위 - pH 도표를 이용한 금속 나노입자 형성

이규환;
[Lee, Kyu Hwan;]

한국기계연구원 부설 재료연구소 표면기술연구본부;
Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 2, pp. 131-139.

DOI : 10.5695/JKISE.2017.50.2.131

Nanoscopic Understanding of Phase Transition of Epitaxial VO₂ Thin Films
에피택셜 VO₂ 박막의 상전이에 대한 미시적 이해

김동욱;손아름;
[Kim, Dong-Wook;Sohn, Ahrum;]

이화여자대학교 물리학과;성균관대학교 신소재공학부;
Department of Physics, Ewha Womans University;School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 50, No. 3, pp. 141-146.

DOI : 10.5695/JKISE.2017.50.3.141

Electrochemical Properties of Air-Formed Oxide Film-Covered AZ31 Mg Alloy in Aqueous Solutions Containing Various Anions

[Fazal, Basit Raza;Moon, Sungmo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 3, pp. 147-154.

DOI : 10.5695/JKISE.2017.50.3.147

The Stability of Plating Solution and the Current Density Characteristics of the Sn-Ag Plating for the Wafer Bumping

[Kim, Dong-Hyun;Lee, Seong-Jun;]

MSC Co., Ltd.;

한국표면공학회지, Vol. 50, No. 3, pp. 155-163.

DOI : 10.5695/JKISE.2017.50.3.155

Adhesion of Cu/Interlayer/Polyimide Flexible Copper Clad Laminate Depending on the Ni-Cr-X Interlayers

[Kim, Si Myeong;Jo, Yoo Shin;Kim, Sung June;Kim, Sang Ho;]

Department of Energy, Materials and Chemical Engineering, Korea University of Technology and Education;

한국표면공학회지, Vol. 50, No. 3, pp. 164-169.

DOI : 10.5695/JKISE.2017.50.3.164

A Study on Electroless Palladium Layer Characteristics and Its Diffusion in the Electroless Palladium Immersion Gold (EPIG) Surface Treatment for Fine Pitch Flip Chip Package
미세피치 플립칩 패키지 구현을 위한 EPIG 표면처리에서의 무전해 팔라듐 피막특성 및 확산에 관한 연구

허진영;이창면;구석본;전준미;이홍기;
[Hur, Jin-Young;Lee, Chang-Myeon;Koo, Seok-Bon;Jeon, Jun-Mi;Lee, Hong-Kee;]

한국생산기술연구원;
Surface R&D Group, Korea institute of industrial technology;

한국표면공학회지, Vol. 50, No. 3, pp. 170-176.

DOI : 10.5695/JKISE.2017.50.3.170

Effect of Surfactant in Electroless Ni-B Plating for Coating on the Diamond Powder
다이아몬드 분말상에 무전해 Ni-B 도금을 위한 계면활성제의 영향

양창열;유시영;문환균;이정호;유봉영;
[Yang, Changyol;Yu, Si-Young;Moon, Hwan-Gyun;Lee, Jung-Ho;Yoo, Bongyoung;]

한양대학교 첨단신소재공학과;일진다이아몬드;한양대학교 첨단신소재공학과재료화학공학과;
Department of Materials and Chemical Engineering, Hanyang University;Iljin Diamond Co., Ltd.;

한국표면공학회지, Vol. 50, No. 3, pp. 177-182.

DOI : 10.5695/JKISE.2017.50.3.177

Mechanical Properties of TiN and DLC coated Rod for Pedicle Screw System
TiN 및 DLC 코팅된 척추용 나사못 시스템 Rod의 기계적 특성 분석

강관수;정태곤;양재웅;우수헌;박태현;정용훈;
[Kang, Kwan-Su;Jung, Tae-Gon;Yang, Jae-Woong;Woo, Su-Heon;Park, Tea-Hyun;Jeong, Yong-Hoon;]

오송첨단의료산업진흥재단 첨단의료기기개발지원센터;(주)메디쎄이 기술연구소;
Medical Device Development Center, OSONG Medical Innovation Foundation;R&D Center, Medyseey Co.;

한국표면공학회지, Vol. 50, No. 3, pp. 183-191.

DOI : 10.5695/JKISE.2017.50.3.183

Development of UBMS(Unbalanced Magnetron Sputtering) System and Ion Current Density Measurement of Copper Target
UBM 마그네트론 스퍼터 시스템을 이용한 구리 타겟의 이온전류밀도 향상 연구

강충현;주정훈;
[Kang, Chunghyeon;Joo, Junghoon;]

군산대학교 공과대학 신소재공학과;
Department of Materials Science & Engineering, Kunsan National University;

한국표면공학회지, Vol. 50, No. 3, pp. 192-197.

DOI : 10.5695/JKISE.2017.50.3.192

Thermal Dissipation Property of Acrylic Composite Films Containing Graphite and Carbon Nanotube
흑연과 탄소나노튜브 함유 아크릴 복합체 박막의 방열 특성

김준영;강찬형;
[Kim, Junyeong;Kang, Chan Hyoung;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 50, No. 3, pp. 198-205.

DOI : 10.5695/JKISE.2017.50.3.198

Photoluminescence Properties of BiNbO₄:RE³⁺ (RE = Dy, Eu, Sm, Tb) Phosphors
BiNbO₄:RE³⁺ (RE = Dy, Eu, Sm, Tb) 형광체의 광학 특성

이상운;조신호;
[Lee, Sangwoon;Cho, Shinho;]

신라대학교 신소재공학부;
Division of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 50, No. 3, pp. 206-211.

DOI : 10.5695/JKISE.2017.50.3.206

Preparation of Nano-sized Mg_xNi_yZn_1-x-yFe₂O₄ by Ultrasonic Wet-Magnetic Separation Method
초음파 습식 자기분류법을 이용한 Mg_xNi_yZn_1-x-yFe₂O₄ 나노입자 제조

구문선;권혁주;최용;
[Gu, Moon Sun;Kwon, Hyuk Joo;Choi, Yong;]

단국대학교 신소재공학과;(주)한스코;
Department of Materials Science and Engineering, Dankook University;R&D Center, HANSCO;

한국표면공학회지, Vol. 50, No. 3, pp. 212-218.

DOI : 10.5695/JKISE.2017.50.3.212

Analysis of the K Gettering in SiO₂/PSG/SiO₂/Al-1%Si Multilevel Thin Films using SIMS
SIMS를 이용한 SiO₂/PSG/SiO₂/Al-1%Si 적층 박막내의 K 게터링 분석

김진영;
[Kim, Jin Young;]

광운대학교 전자재료공학과;
Department of Electronic Materials Engineering, Kwangwoon University;

한국표면공학회지, Vol. 50, No. 3, pp. 219-224.

DOI : 10.5695/JKISE.2017.50.3.219

The Effect of Wall Thickness of ZnO Nanotubes on the Ethanol Gas Sensing Performance
산화아연 나노튜브의 벽 두께에 따른 에탄올 가스 검출특성

강우승;
[Kang, Wooseung;]

인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 50, No. 3, pp. 225-229.

DOI : 10.5695/JKISE.2017.50.3.225

Quantitative Analysis of the Amount of Aluminium Dissolved in Phosphoric Acid

[Moon, Sungmo;Yang, Cheolnam;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 4, pp. 231-236.

DOI : 10.5695/JKISE.2017.50.4.231

Characterization of RF Sputter-deposited Sodium Phosphorous Oxynitride Thin Films as a Solid-state Sodium-ion Conductor

[Chun, Sang-Eun;]

School of Materials Sciences and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 50, No. 4, pp. 237-243.

DOI : 10.5695/JKISE.2017.50.4.237

Effect of Plating Conditions on Electroless Copper Plating on SiC Fabric
직조된 SiC 섬유에 무전해 구리도금 시 도금 조건의 영향

이기환;손유한;한태양;이경진;김혜성;한준현;
[Lee, Kee Hwan;Sohn, Youhan;Han, Taeyang;Lee, Kyung Jin;Kim, Hye Hung;Han, Jun Hyun;]

충남대학교 신소재공학과;충남대학교 응용화학공학과;부산대학교 나노메카트로닉스공학과;
Department of Materials Science & Engineering, Chungnam National University;Department of Chemical Engineering & Applied Chemistry, Chungnam National University;Department of Nanomechatronics Engineering, Pusan National University;

한국표면공학회지, Vol. 50, No. 4, pp. 244-250.

DOI : 10.5695/JKISE.2017.50.4.244

Corrosion Damage Characteristics of STS 304 for the Nuclear Power Plant with Chemical Decontamination Conditions in Permanganic and Oxalic Acid
과망간산과 옥살산 화학제염 공정 시 원전기기용 STS 304 의 부식 손상 특성

한민수;정광후;양예진;박일초;김기철;서범철;박주현;김성종;
[Han, Min-Su;Jung, Kwang-Hu;Yang, Ye-Jin;Park, Il-Cho;Kim, Ki-Chul;Seo, Bum-Chul;Park, Ju-Hyun;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;한전KPS;
Division of Marine Engineering, Mokpo National Maritime University;KEPCO Plant Service&Engineering Co., LTD;

한국표면공학회지, Vol. 50, No. 4, pp. 251-258.

DOI : 10.5695/JKISE.2017.50.4.251

Electrochemical Corrosion Damage Characteristics of Alumium Alloy and Stainless Steel with Sea Water Concentration
알루미늄 합금 및 스테인리스강의 해수 농도 변화에 따른 전기화학적 부식 손상 특성

박일초;김영복;김성종;
[Park, Il-Cho;Kim, Young-Bok;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 50, No. 4, pp. 259-265.

DOI : 10.5695/JKISE.2017.50.4.259

Density and Corrosion Property Improvement of Zn-Mg Coatings by Controlling the Substrate Temperature during the Deposition
증착 기판 온도 제어에 따른 Zn-Mg 박막의 치밀도 및 내식성 향상에 관한 연구

송면규;라정현;김회근;이상율;
[Song, Myeon-Kyu;La, Joung-Hyun;Kim, Hoe-Kun;Lee, Sang-Yul;]

한국항공대학교 표면기술응용연구센터;
Center for Surface Technology and Applications, Department of Materials Engineering, Korea Aerospace University;

한국표면공학회지, Vol. 50, No. 4, pp. 266-271.

DOI : 10.5695/JKISE.2017.50.4.266

Enhancement of Surface Hardness and Corrosion Resistance of AISI 310 Austenitic Stainless Steel by Low Temperature Plasma Carburizing Treatment

[Lee, Insup;]

Department of Advanced Materials Engineering, Dongeui University;

한국표면공학회지, Vol. 50, No. 4, pp. 272-276.

DOI : 10.5695/JKISE.2017.50.4.272

Fabrication and Electrical Propertie of the Ferroelectric (K_0.5Na_0.5)NbO₃
강유전체(K_0.5Na_0.5)NbO₃의 제조 및 전기적 특성 분석

현준원;변재덕;
[Hyun, June Won;Byun, Jaeduk;]

단국대학교 물리학과;
Department of Physics, Dankook University;

한국표면공학회지, Vol. 50, No. 4, pp. 277-281.

DOI : 10.5695/JKISE.2017.50.4.277

Luminescence Properties of La₂MoO₆:RE³⁺ (RE = Eu, Sm) Phosphors Subjected to the Different Concentrations of Activator Ions
활성제 이온의 농도 변화에 따른 La₂MoO₆:RE³⁺ (RE = Eu, Sm) 형광체의 발광 특성

김가연;신종언;조신호;
[Kim, Gayeon;Shin, Johngeon;Cho, Shinho;]

신라대학교 신소재공학부;
Division of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 50, No. 4, pp. 282-288.

DOI : 10.5695/JKISE.2017.50.4.282

CO₂ Sensing Properties of SnO₂-Cr₂O₃ Composite Nanofibers Via Electrospinning Method
전기방사법으로 합성된 SnO₂-Cr₂O₃ 복합나노섬유의 이산화탄소 가스감응 특성

이재형;김재훈;김진영;김상섭;
[Lee, Jae-Hyoung;Kim, Jae-Hun;Kim, Jin-Young;Kim, Sang Sub;]

인하대학교 신소재공학과;
Department of Materials Science & Engineering, Inha University;

한국표면공학회지, Vol. 50, No. 4, pp. 289-295.

DOI : 10.5695/JKISE.2017.50.4.289

Gas Sensing Properties of Au-decorated NiO Nanofibers
Au 촉매금속이 첨가된 NiO 나노섬유의 가스 검출 특성

강우승;
[Kang, Wooseung;]

인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 50, No. 4, pp. 296-300.

DOI : 10.5695/JKISE.2017.50.4.296

Electrical Properties of Thick-Film Resistor Prepared by Using RuO₂-Glass Composite Powder
RuO₂-유리 복합분말을 이용하여 제조된 후막 저항의 전기적 특성 연구

김민식;류성수;
[Kim, Min-Sik;Ryu, Sung-Soo;]

한국세라믹기술원 엔지니어링세라믹센터;
Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 50, No. 5, pp. 301-307.

DOI : 10.5695/JKISE.2017.50.5.301

Effect of NaOH Concentration on the PEO Film Formation of AZ31 Magnesium Alloy in the Electrolyte Containing Carbonate and Silicate Ions

[Moon, Sungmo;Kim, Yeajin;Yang, Cheolnam;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 5, pp. 308-314.

DOI : 10.5695/JKISE.2017.50.5.308

Fabrication of Si Inverted Pyramid Structures by Cu-Assisted Chemical Etching for Solar Cell Application
결정질 실리콘 태양전지의 효율개선을 위한 실리콘 역 피라미드 구조체 최적화

박진형;남윤호;유봉영;이정호;
[Park, Jin Hyeong;Nam, Yoon-Ho;Yoo, Bongyoung;Lee, Jung-Ho;]

융합화학공학과, 한양대학교 ERICA캠퍼스;
Department of Materials and Chemical Engineering, Hanyang University;

한국표면공학회지, Vol. 50, No. 5, pp. 315-321.

DOI : 10.5695/JKISE.2017.50.5.315

Synthesis and Characterization of Ni₄Cr Nanofiber Electrocatalyst for Hydrogen Evolution Reaction
수소발생반응을 위한 Ni₄Cr 나노 섬유 전기화학 촉매 합성 및 특성 분석

이정훈;장명제;박유세;최승목;김양도;이규환;
[Lee, Jeong Hun;Jang, Myeong Je;Park, Yoo Sei;Choi, Sung Mook;Kim, Yang Do;Lee, Kyu Hwan;]

한국기계연구원 부설 재료연구소 표면기술연구본부;한국과학기술연합대학원대학교 신소재공학부;부산대학교 재료공학과;
Surface Technology Department, Korea Institute of Materials Science;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 50, No. 5, pp. 322-331.

DOI : 10.5695/JKISE.2017.50.5.322

Corrosion Damage Characteristics of Inconel 600 with Reduction Conditions in Chemical Decontamination Process
화학제염공정에서 환원공정조건에 따른 Inconel 600의 부식손상 특성

한민수;정광후;양예진;박일초;이정형;김성종;
[Han, Min-Su;Jung, Kwang-Hu;Yang, Ye-Jin;Park, IL-Cho;Lee, Jung-Hyung;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 50, No. 5, pp. 332-338.

DOI : 10.5695/JKISE.2017.50.5.332

Effect of ALD-Al₂O₃ Passivation Layer on the Corrosion Properties of CrAlSiN Coatings
ALD-Al₂O₃ 보호층이 적용된 CrAlSiN 코팅막의 내부식성 특성에 관한 연구

만지흠;이우재;장경수;최현진;권세훈;
[Wan, Zhixin;Lee, Woo-Jae;Jang, Kyung Su;Choi, Hyun-Jin;Kwon, Se Hun;]

부산대학교, 재료공학부;(주)서영, 나노융합사업팀;부산테크노파크, 멤스나노부품생산센터;
School of Materials Science and Engineering, Pusan National University;Nano Convergence Team, Seo Yeong Co. Ltd.;MEMS/NANO Component Production Center, Busan Techno Park;

한국표면공학회지, Vol. 50, No. 5, pp. 339-344.

DOI : 10.5695/JKISE.2017.50.5.339

Anti-Reflective Coating with Hydrophilic/Abraion-Resistant Properties using TiO₂/SiO_xC_y Double-Layer Thin Film
TiO₂/SiO_xC_y 이중 박막을 이용한 투명 친수성/내마모성 반사방지 코팅

이성준;이민교;박영춘;
[Lee, Sung-jun;Lee, Min-kyo;Park, Young-chun;]

한동대학교 첨단그린에너지환경학과;한동대학교 정보통신공학과;
Department of Advanced Green Energy and Enviornment;Department of Information Technology, Handong Global University;

한국표면공학회지, Vol. 50, No. 5, pp. 345-351.

DOI : 10.5695/JKISE.2017.50.5.345

Growth of Nanocrystalline Diamond Films on Poly Silicon
폴리 실리콘 위에서 나노결정질 다이아몬드 박막 성장

김선태;강찬형;
[Kim, Sun Tae;Kang, Chan Hyoung;]

한국산업기술대학교;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 50, No. 5, pp. 352-359.

DOI : 10.5695/JKISE.2017.50.5.352

Ion Release and Biocompatibility of Sintered Ni-Cr-Ti Alloy for Dental Prosthodontics
치과보철용 Ni-Cr-Ti소결체합금의 이온용출과 생체적합성

최한철;김승희;
[Choe, Han-Cheol;Kim, Seung-Hui;]

조선대학교 치과대학 치과재료학교실;광주보건대학교 치위생과;
Department of Dental Materials and Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, Chosun University;Department of Dental Hygiene, Gwangju Health University;

한국표면공학회지, Vol. 50, No. 5, pp. 360-365.

DOI : 10.5695/JKISE.2017.50.5.360

Characteristics of Coating Films on Hot-Dipped Aluminized Steel Formed by Plasma Electrolytic Oxidation Process at Different Current Densities
PEO 전류밀도 조건에 따른 알루미늄도금 강재상 산화코팅막의 특성

최인혜;이훈성;이명훈;
[Choi, In-Hye;Lee, Hoon-Seung;Lee, Myeong-Hoon;]

한국해양대학교 기관공학부;
Division of Marine Engineering, Korea Maritime and ocean University;

한국표면공학회지, Vol. 50, No. 5, pp. 366-372.

DOI : 10.5695/JKISE.2017.50.5.366

Multilayer Coatings on Flexible substrate for Electromagnetic Shielding by Using Dry/Wet Hybrid Processes
건습식 혼합공정을 이용한 유연소재 상 전자파 차폐용 다층막 코팅

이훈성;이명훈;
[Lee, Hoon-Seung;Lee, Myeong-Hoon;]

한국해양대학교 기관공학부;
Division of Marine Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 50, No. 5, pp. 373-379.

DOI : 10.5695/JKISE.2017.50.5.373

Effect of High Temperature Aging Time on Mechanical Characteristics Degradation of STS 304 Steel
STS 304 강의 기계적 특성에 미치는 고온 열화 시간의 영향

정광후;김성종;
[Jung, Kwang-Hu;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 50, No. 5, pp. 380-385.

DOI : 10.5695/JKISE.2017.50.5.380

Effect of Sulfur on the High-temperature Oxidation of Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si Alloys
Fe-34.4Cr-14.5Ni-2.5Mo-0.4W-0.4Mn-0.5Si 합금의 고온 산화에 미치는 S의 영향

이동복;이경환;배근수;조규철;정재옥;김민정;
[Lee, Dong Bok;Lee, Kyong-Hwan;Bae, Geun Soo;Cho, Gyu Chul;Jung, Jae Ok;Kim, Min Jung;]

성균관대학교 신소재공학부;신성대학교 제철산업과;한국피아이엠 기술연구소;
School of Advanced Materials Science and Engineering, Sungkyunkwan University;Department of Steel Industry, Shinsung University;R&D Center, PIMKOREA;

한국표면공학회지, Vol. 50, No. 5, pp. 386-391.

DOI : 10.5695/JKISE.2017.50.5.386

High-speed Microcantilever Resonance Testing on the Young`s Modulus of a Nanoscale Titanium Film
고속 마이크로 외팔보 공진시험을 통한 나노스케일 티타늄 박막의 탄성계수 평가

김윤영;
[Kim, Yun Young;]

동의대학교 기계자동차로봇부품공학부;
Division of Mechanical, Automotive, and Robot Component Engineering, Dong-eui University;

한국표면공학회지, Vol. 50, No. 5, pp. 392-397.

DOI : 10.5695/JKISE.2017.50.5.392

Electroluminescent Characteristics of Fluorescent OLED with Alternating Current Forward Bias
교류 순방향 바이어스에 따른 형광 OLED의 전계 발광 특성

서정현;주성후;
[Seo, Jung-Hyun;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 50, No. 5, pp. 398-404.

DOI : 10.5695/JKISE.2017.50.5.398

Impedance Characteristics of Blue Fluorescent OLED According to Elapsed Time
경과 시간에 따른 청색 형광 OLED의 Impedance 특성

공도훈;양재웅;주성후;
[Kong, Do-Hoon;Yang, Jae-Woong;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 50, No. 5, pp. 405-410.

DOI : 10.5695/JKISE.2017.50.5.405

Effects of Pd Addition Amount and Method on the Characteristics of SnO₂ Semiconductor Thick Films for Alcohol Gas Sensors
Pd 첨가량 및 첨가방법이 알코올 센서용 SnO₂ 반도체 후막 특성에 미치는 영향 연구

김준형;김형관;이호년;김현종;이희철;
[Kim, Jun-Hyung;Kim, Hyeong-Gwan;Lee, Ho-Nyun;Kim, Hyun-Jong;Lee, Hee-Chul;]

한국산업기술대학교 신소재공학과;한국생산기술연구원 표면처리그룹;
Department of Advanced Materials Engineering, Korea Polytechnic University;Surface Technology R&BD Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 50, No. 5, pp. 411-420.

DOI : 10.5695/JKISE.2017.50.5.411

Surface Morphological Properties of Micro-arc Oxidation Coating on Al6061 Alloys using Unipolar Pulse
Unipolar pulse를 이용하여 형성된 Al6061 합금 표면의 MAO 코팅의 표면 구조에 대한 연구

김남열;박승호;박기용;최진섭;
[Kim, Nam-youl;Park, Seung-Ho;Park, Ki-Youg;Choi, Jin-Sub;]

인하대학교 화학공학과;(주)포인트엔지니어링;
Department of Chemistry and Chemical Engineering, Inha University;Point engineering CO., LTD;

한국표면공학회지, Vol. 50, No. 5, pp. 421-426.

DOI : 10.5695/JKISE.2017.50.5.421

Three-Dimensional (3D) Anodic Aluminum Surfaces by Modulating Electrochemical Method

[Jeong, Chanyoung;Choi, Chang-Hwan;]

Division of Advanced Materials Engineering, Dong-Eui University;Department of Mechanical Engineering, Stevens Institute of Technology;

한국표면공학회지, Vol. 50, No. 6, pp. 427-431.

DOI : 10.5695/JKISE.2017.50.6.427

Fabrication of Plasma Electrolytic Oxidation Coatings on Magnesium AZ91D Casting Alloys

[Lee, Sung-Hyung;Yashiro, Hitoshi;Kure-Chu, Song-Zhu;]

GEO Nation Co. Ltd.;Department of Chemistry and Bioengineering, Iwate University;Materials Function and Design, Nagoya Institute of Technology;

한국표면공학회지, Vol. 50, No. 6, pp. 432-438.

DOI : 10.5695/JKISE.2017.50.6.432

Optimization of Pretreatment Conditions for Ti Surface in the Low Voltage PEO Anodization Process
저전압 PEO 양극산화 공정을 위한 Ti 전처리 조건의 최적화 연구

하동흔;최진섭;
[Ha, Dongheun;Choi, Jinsub;]

인하대학교 화학.화공융합학과;
Department of Chemistry and Chemical Engineering, Inha University;

한국표면공학회지, Vol. 50, No. 6, pp. 439-446.

DOI : 10.5695/JKISE.2017.50.6.439

TEM Characterization of Oxide Films Formed on Al1050 and Al7075 Alloys under Atmospheric Corrosion Conditions
대기 부식에 의해 생성된 Al1050 및 Al7075 알루미늄 합금 산화막에 대한 투과전자현미경 분석

김선규;이찬형;반치범;
[Kim, Sungyu;Lee, Chanhyeong;Bahn, Chi Bum;]

부산대학교 기계공학부;
School of Mechanical Engineering, Pusan National University;

한국표면공학회지, Vol. 50, No. 6, pp. 447-454.

DOI : 10.5695/JKISE.2017.50.6.447

Improvement of Electrical Property and Stability of Silver Nanowire Transparent Electrode Via Ion-beam Treatment
이온빔 처리를 통한 은나노와이어 전극의 전기적 특성과 안정성 향상

정성훈;이승훈;김도근;
[Jung, Sunghoon;Lee, Seunghun;Kim, Do-Geun;]

재료연구소 표면기술연구본부 플라즈마공정연구실;
Plasma Processing Technology Department, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 6, pp. 455-459.

DOI : 10.5695/JKISE.2017.50.6.455

Formation of YSZ Coatings Deposited by Suspension Vacuum Plasma Spraying
서스펜션 진공 플라즈마 용사법을 통한 YSZ 코팅의 형성

유연우;변응선;
[Yoo, Yeon Woo;Byon, Eungsun;]

재료연구소 표면기술연구본부 플라즈마공정연구실;
Advanced Plasma Processing Department, Surface Technology Division, Korea Institute of Materials Science(KIMS);

한국표면공학회지, Vol. 50, No. 6, pp. 460-464.

DOI : 10.5695/JKISE.2017.50.6.460

Thermal Shock Resistance According to the Manufacturing Process of Lanthanum Gadolinium Zirconate Ceramic Igot for Thermal Barrier Coating by Electron Beam in the La₂O₃-Gd₂O₃-ZrO₂ System
전자빔 증착 열차폐 코팅용 란타늄-가돌리늄 지르코네이트(La₂O₃-Gd₂O₃-ZrO₂계) 세라믹 잉곳의 제조공정에 따른 열충격 저항성

최선아;채정민;김성원;이성민;한윤수;김형태;장병국;오윤석;
[Choi, Seona;Chae, Jungmin;Kim, Seongwon;Lee, Sungmin;Han, Yoonsoo;Kim, Hyungtae;Jang, Byungkoog;Oh, Yoonsuk;]

한국세라믹기술원 이천분원 엔지니어링세라믹센터;물질재료연구기구(NIMS) 구조재료센터;
Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology;Research Center for Structural Materials, National Institute for Materials Science;

한국표면공학회지, Vol. 50, No. 6, pp. 465-472.

DOI : 10.5695/JKISE.2017.50.6.465

Effect of Working Pressure and Substrate Bias on the Tribology Properties of the Cr-Al-N Coatings
Cr-Al-N 코팅의 마찰마모 특성에 미치는 공정압력과 바이어스 전압의 영향

최선아;김성원;이성민;김형태;오윤석;
[Choi, Seon-A;Kim, Seong-Won;Lee, Sungmin;Kim, Hyung-Tae;Oh, Yoon-Suk;]

한국세라믹기술원 엔지니어링세라믹센터;
Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 50, No. 6, pp. 473-479.

DOI : 10.5695/JKISE.2017.50.6.473

Soft Mold Imprinting Fabrication of Anti-reflection Film using Self-Organized Nanostructure Polymer Surfaces Irradiated by Ion Beams
이온빔 처리된 폴리머 표면의 자가나노구조화를 이용한 반사방지 필름 제조용 소프트 몰드 임프린팅 연구

이승훈;변은연;최주연;정성훈;유병길;김도근;
[Lee, Seunghun;Byeon, Eun-Yeon;Choi, Juyeon;Jung, Sunghoon;Yu, Byeong-Gil;Kim, Do-Geun;]

재료연구소 표면기술연구본부 플라즈마공정연구실;제이피이;
Surface Technology Department, Korea Institute of Materials Science;JPE;

한국표면공학회지, Vol. 50, No. 6, pp. 480-485.

DOI : 10.5695/JKISE.2017.50.6.480

Fabrications of Silver Nanowire/NiO Based High Thermal-Resistance Hybrid Transparent Electrode
은나노선/Ni 산화물 고내열성 하이브리드 투명전극의 형성

정성훈;이승훈;김도근;
[Jung, Sunghoon;Lee, Seunghun;Kim, Do-Geun;]

재료연구소 표면기술연구본부 플라즈마공정연구실;
Plasma Processing Technology Department, Korea Institute of Materials Science;

한국표면공학회지, Vol. 50, No. 6, pp. 486-491.

DOI : 10.5695/JKISE.2017.50.6.486

Evaluation of Microstructure and Mechanical Property of Inconel 600 Degraded under High Temperature
고온 열화된 Inconel 600강의 미세조직 및 기계적 특성 평가

정광후;김성종;
[Jung, Kwang-Hu;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 50, No. 6, pp. 492-497.

DOI : 10.5695/JKISE.2017.50.6.492

Electrochemical Corrosion Evaluation of Aluminum Alloy Weldment Prepared by GMAW Process
알루미늄 합금 GMAW 용접부의 전기화학적 방법에 의한 내식성 평가

양예진;박일초;이정형;한민수;김성종;
[Yang, Ye-Jin;Park, Il-Cho;Lee, Jung-Hyung;Han, Min-Su;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 50, No. 6, pp. 498-503.

DOI : 10.5695/JKISE.2017.50.6.498

Corrosion Characteristics of Cast Stainless Steel under Plasma Ion Nitriding Process Temperature in Marine Environment
주조 스테인리스강의 해양환경 하에서 플라즈마 이온질화 공정온도에 따른 부식특성 연구

정상옥;김성종;
[Chong, Sang-Ok;Kim, Seong-Jong;]

디엔브이지엘;목포해양대학교 기관시스템공학부;
Division of Maritime, DNV.GL;Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 50, No. 6, pp. 504-509.

DOI : 10.5695/JKISE.2017.50.6.504

Electrical Characteristics of the Ag Past with addition of Low-melting Alloy of Bi58Sn42 for Metal Mesh Touch Sensors
저융점 합금(Bi58Sn42)을 이용한 Metal Mesh Touch Sensor용 Ag 페이스트의 전기적 특성

김태형;허영우;김정주;이준형;
[Kim, Tae-Hyung;Heo, Young-Woo;Kim, Jeong-Joo;Lee, Joon-Hyung;]

경북대학교 신소재공학부;
School of Materials Science and Engineering Kyungpook National University;

한국표면공학회지, Vol. 50, No. 6, pp. 510-515.

DOI : 10.5695/JKISE.2017.50.6.510

Carbon Nanotube Growth on Invar Alloy using Coal Tar Pitch
콜타르피치를 이용한 Invar 합금 위 탄소나노튜브의 합성

김준우;정구환;
[Kim, Joon-Woo;Jeong, Goo-Hwan;]

강원대학교 공과대학 나노응용공학과;
Department of Nano Applied Engineering, Kangwon National University;

한국표면공학회지, Vol. 50, No. 6, pp. 516-522.

DOI : 10.5695/JKISE.2017.50.6.516

Fabrication and Characterization of C_f/SiC Composite with BN Interphase Coated by Wet Chemical Process
습식법으로 제조된 BN 중간층을 가진 C_f/SiC 복합재의 제조 및 물성 평가

구준모;김경호;한윤수;
[Koo, Jun-mo;Kim, Kyung Ho;Han, Yoonsoo;]

한국세라믹기술원 엔지니어링세라믹센터;
Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology;

한국표면공학회지, Vol. 50, No. 6, pp. 523-530.

DOI : 10.5695/JKISE.2017.50.6.523

Formation of Calcareous Deposit on Steel Plate by using Waste Oyster Shell
강판상에 굴 패각을 이용한 탄산칼슘 피막의 형성

김범수;권재성;김연원;이명훈;양정현;
[Kim, Beomsoo;Kwon, Jaesung;Kim, Yeonwon;Lee, Myeonghoon;Yang, Jeonghyeon;]

경상대학교 해양산업연구소 기계시스템공학과;목포해양대학교 메카트로닉스공학부;한국해양대학교 기관공학부;
Department of Mechanical System Engineering and Institute of Marine Industry, Gyeongsang National University;Division of Marine Mechatronics, Mokpo National Maritime University;Division of Marine Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 50, No. 6, pp. 531-535.

DOI : 10.5695/JKISE.2017.50.6.531