A Study on the Adhesion Improvement of Immersion Copper Coatings using Complexing Agent
착화제를 이용한 치환동 도금층의 밀착력 향상에 관한 연구
구석본;전준미;허진영;이홍기;
[Koo, Seokbon;Jeon, Jumi;Hur, Jinyoung;Lee, Hongkee;]
한국생산기술연구원 표면처리연구실용화그룹;
Surface Technology R&BD Group, Korea Institute of Industrial Technology;
한국표면공학회지, Vol. 48, No. 1, pp. 1-6.
The Study of Improvement in the Characteristics of Oxide Thin Film Transistor by using Atmospheric Pressure Plasma
대기압 플라즈마를 이용한 산화물 박막 트랜지스터 표면처리에 관한 연구
김가영;김경남;염근영;
[Kim, Ga Young;Kim, Kyong Nam;Yeom, Geun Young;]
성균관대학교 신소재공학부;
School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU);
한국표면공학회지, Vol. 48, No. 1, pp. 7-10.
Improvement in Long-term Stability of Pd Alloy Hydrogen Separation Membranes
팔라듐 합금 수소분리막의 내구성 향상
김창현;이준형;조성태;김동원;
[Kim, Chang-Hyun;Lee, Jun-Hyung;Jo, Sung-Tae;Kim, Dong-Won;]
경기대학교 SDM 전공;경기대학교 신소재공학과;
Department of SDM (Semiconductor Display Mechatronics), Kyonggi University;Department of Advanced Materials Engineering, Kyonggi University;
한국표면공학회지, Vol. 48, No. 1, pp. 11-22.
Study on Thermal behavior of Flexible CIGS Thin Film Solar Cell on Fe-Ni Alloy Substrates using Finite Element Analysis
유한요소해석을 이용한 CIGS 박막 태양전지용 Fe-Ni 합금 기판재 열적 거동 연구
한윤호;이민수;김동환;임태홍;
[Han, Yun-Ho;Lee, Min-Su;Kim, Dong-Hwan;Yim, Tai-Hong;]
한국생산기술연구원;고려대학교 신소재공학과;
Korea Institute of Industrial Technology (KITECH);Department of Materials Science and Engineering, Korea University;
한국표면공학회지, Vol. 48, No. 1, pp. 23-26.
Behavior of the Surface Precipitation of Manganese Oxides during Hot-dip Galvanizing
용융아연 도금욕에서 망간 산화물의 표면석출 거동
이호종;김명수;
[Lee, Ho Jong;Kim, Myung Soo;]
순천대학교 신소재공학과;포항제철 기술연구원;
Department of Advanced Materials Engineering, Sunchon National University;POSCO Technical Research Laboratories;
한국표면공학회지, Vol. 48, No. 1, pp. 27-32.
Heat dissipation of Al2O3 Insulation layer Prepared by Anodizing Process for Metal PCB
Metal PCB에 있어서 양극산화법으로 제작한 Al2O3절연막의 방열특성
조재승;김정호;고상원;임실묵;
[Jo, Jae-Seung;Kim, Jeong-Ho;Ko, Sang-Won;Lim, Sil-Mook;]
주식회사 제이스;한국산업기술대학교 신소재공학과;
Jeis Co., Ltd.;Department of Advanced Materials Engineering, Korea Polytechnic University;
한국표면공학회지, Vol. 48, No. 2, pp. 33-37.
Growth of Atomic Layer Deposition Platinum on TiO2
이산화 티타늄 위에서의 원자층 증착법 백금의 성장 특성
김현구;이한보람;
[Kim, Hyun Gu;Lee, Han-Bo-Ram;]
인천대학교 신소재공학과;
Department of Materials Science and Engineering, Incheon National University;
한국표면공학회지, Vol. 48, No. 2, pp. 38-42.
Deposition Characteristics of TiO2 Thin Films Prepared by DC Pulsed Magnetron Sputtering
DC 펄스 마그네트론 스퍼터링으로 증착된 TiO2 박막의 특성변화에 관한 연구
안은솔;허성보;김규식;정우창;박용호;박인욱;
[An, Eunsol;Heo, Sung-Bo;Kim, Kyu-Sik;Jung, Uoo Chang;Park, Yong Ho;Park, In-Wook;]
한국생산기술연구원;부산대학교 재료공학부;
Korea Institute of Industrial Technology (KITECH);School of Materials Science and Engineering, Pusan National University;
한국표면공학회지, Vol. 48, No. 2, pp. 43-49.
Effect of Atomic Layer Deposited Al2O3 Thin Films on the Mechanical Properties of Anti-reflective Moth Eye Nanostructured Films
원자층 증착법에 의한 Al2O3 박막 형성에 따른 모스아이 구조 반사방지 필름의 기계적 물성에 미치는 영향
윤은영;이우재;장경수;최현진;최우창;권세훈;
[Yun, Eun Young;Lee, Woo-Jae;Jang, Kyung Su;Choi, Hyun-Jin;Choi, Woo-Chang;Kwon, Se Hun;]
부산대학교, 재료공학부;(주)서영, 나노융합사업팀;부산테크노파크, 멤스나노부품생산센터;
School of Materials Science and Engineering, Pusan National University;Nano Convergence Team, Seo Yeong Co. Ltd.;MEMS/NANO Component Production Center;
한국표면공학회지, Vol. 48, No. 2, pp. 50-55.
Characterization of Tribology for Automobile Part of Manganese Phosphate Solution with Addition agent
자동차 부품 Tribology용 인산-망간 화성처리에 있어서 첨가제에 따른 화성피막 특성
변영민;박종규;서선교;이지환;
[Byoun, Young-Min;Park, Jong-Kyu;Seo, Sun-Kyo;Lee, Chi-Hwan;]
인하대학교 금속공학과;삼영화학;
Dept. of Metallurgical Engineering, College of Engineering, Inha University;Sam Young Chemical;
한국표면공학회지, Vol. 48, No. 2, pp. 56-61.
Effect of Electrolysis Condition on Mechanical Property of Ni Electrodeposits
니켈 도금층의 기계적 성질에 미치는 전해조건의 영향
강수영;이정자;양승기;황운석;
[Kang, Soo Young;Lee, Jeong Ja;Yang, Seung Gi;Hwang, Woon Suk;]
인하공업전문대학 금속재료과;인하대학교 신소재공학부;
Dept. of Metallurgical & Material Engineering, Inha Technical College;School of materials Science and engineering, Inha University;
한국표면공학회지, Vol. 48, No. 2, pp. 62-67.
Electrochemical Evaluation of Corrosion Properties of Aluminum Alloy as a Sacrificial Anode for Offshore Structure Protection
해양구조물의 방식을 위한 알루미늄 합금의 희생양극적 부식 특성의 전기화학적 평가
이진호;이재호;
[Rhee, Jin-Ho;Lee, Jae-Ho;]
홍익대학교 신소재공학과;
Dept. of Materials Science and Engineering, Hongik University;
한국표면공학회지, Vol. 48, No. 2, pp. 68-72.
Effects of Electrodeposition Conditions on Properties of Ni Thin Films Electrodeposited from Baths Fabricated by Dissolving Metal Ni Powders
금속 Ni 분말을 용해한 도금용액으로부터 전기도금 된 Ni 박막 특성에 미치는 도금조건의 영향
윤필근;박근용;엄영랑;최선주;박덕용;
[Yoon, Pilgeun;Park, Keun-Yong;Uhm, Young Rang;Choi, Sun Ju;Park, Deok-Yong;]
한밭대학교 신소재공학과;한국원자력연구원 동위원소 이용기술 개발부;
Department of Advanced Materials Engineering, Hanbat National University;Korea Atomic Energy Research Institute;
한국표면공학회지, Vol. 48, No. 3, pp. 73-81.
Synthesis and Photoluminescence Properties of Dy3+- and Eu3+-codoped CaMoO4 Phosphors
Dy3+와 Eu3+ 이온이 동시 도핑된 CaMoO4 형광체의 합성과 발광 특성
김준한;조신호;
[Kim, Junhan;Cho, Shinho;]
신라대학교 신소재공학과;
Department of Materials Science and Engineering, Silla University;
한국표면공학회지, Vol. 48, No. 3, pp. 82-86.
Corrosion Properties of Carbon-Coated Metallic Bipolar Plate for PEMFC
고분자 전해질 연료전지 금속 분리판 적용을 위한 탄소 박막의 증착과 내식성 평가
장동수;이정중;
[Jang, Dong-Su;Lee, Jung-Joong;]
서울대학교 재료공학부;
Department of Materials Science and Engineering, Seoul National University;
한국표면공학회지, Vol. 48, No. 3, pp. 87-92.
The Joining Quality of High Strength Bolt, Nut and Washer Set (S10T & 10.9HRC) under the Surface Treatment Conditions
표면처리별 S10T, 10.9HRC 고장력 볼트 세트의 체결 품질 연구
최윤오;석한길;홍현선;
[Choi, Youn-O;Suk, Han-Gil;Hong, Hyeon-Sun;]
KPF(주) 품질보증부;강원대학교 재료금속공학과;성신여자대학교 청정융합과학과;
Quality Assurance Team, Korea Parts & Fasteners (KPF) Co., Ltd.;Department of Materials and Metallurgical Engineering, Kangwon National University;Department of Interdisciplinary ECO Science, Sungshin Women`s University;
한국표면공학회지, Vol. 48, No. 3, pp. 93-99.
Effect of Phosphorous Acid Concentration on Mechanical Properties of Ni-P Electrodeposits
니켈-인 도금 층의 기계적 성질에 미치는 아인산 농도의 영향
강수영;양승기;황운석;
[Kang, Soo Young;Yang, Seung gi;Hwang, Woon suk;]
인하공업전문대학 금속재료과;인하대학교 신소재공학부;
Dept. of Metallurgical & Material Engineering, Inha Technical College;School of materials Science and engineering, Inha University;
한국표면공학회지, Vol. 48, No. 3, pp. 100-104.
Emission Characteristics of Multi-Tandem OLED using MoOx with CGL
CGL 층으로 MoOx를 사용한 다중 적층구조 OLED의 발광 특성
김지현;주성후;
[Kim, Ji-Hyun;Ju, Sung-Hoo;]
대진대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 3, pp. 105-109.
Aluminizing and Corrosion of Carbon Steels in N2/0.5%H2S Gas at 650-850℃
[Abro, Muhammad Ali;Lee, Dong Bok;]
School of Advanced Materials Science & Engineering, Sungkyunkwan University;
한국표면공학회지, Vol. 48, No. 3, pp. 110-114.
White Tandem Organic Light-Emitting Diodes Using Red and Blue Fluorescent Materials
적색과 청색 형광 물질을 사용한 백색 적층 OLED
박찬석;공도훈;강주현;윤성혁;주성후;
[Park, Chan-Suk;Kong, Do-Hun;Kang, Ju-Hyun;Yun, Sung-Hyuk;Ju, Sung-Hoo;]
대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 3, pp. 115-120.
Emission Characteristics of Blue Fluorescent OLED with Anode Materials
양극 물질에 따른 청색 형광 OLED의 발광 특성
공도훈;이요셉;주성후;양재웅;
[Kong, Do-Hoon;Lee, Yo-Seb;Ju, Sung-Hoo;Yang, Jae-Woong;]
대진대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 3, pp. 121-125.
[Kim, Yeonwon;]
Division of Marine Engineering, Korea Maritime University;
한국표면공학회지, Vol. 48, No. 3, pp. 126-130.
Characterization of the SnAg Electrodeposits according to the Current Density and Cross-sectional Microstructure Analysis in the Cu Pillar Solder Bump
전류밀도에 따른 SnAg 도금층의 특성 및 Cu 필라 솔더 범프의 단면 미세구조 측정
김상혁;홍성기;임현호;이효종;
[Kim, Sang-Hyuk;Hong, Seong-Ki;Yim, Hyunho;Lee, Hyo-Jong;]
동아대학교 공과대학 신소재공학과;
Department of Material Science and Engineering, Dong-A University;
한국표면공학회지, Vol. 48, No. 4, pp. 131-135.
A Comparative Study of NbN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Magnetron Sputtering
DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 NbN 코팅막의 물성 비교연구
전성용;오복현;
[Chun, Sung-Yong;Oh, Bok-Hyun;]
목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;
한국표면공학회지, Vol. 48, No. 4, pp. 136-141.
Effect of Equal Channel Angular Pressing on the Pitting Corrosion Resistance of Hard Anodized Al5052 Alloy
경질양극산화를 실시한 Al5052합금의 내공식성에 미치는 ECAP의 영향
손인준;
[Son, Injoon;]
경북대학교 신소재공학부 금속신소재공학전공;
Department of Materials Science and Metallurgical Engineering, Kyungpook National University;
한국표면공학회지, Vol. 48, No. 4, pp. 142-148.
Effect of Fabric Structure and Plating Method on EMI Shielding Property of Conductive Fabric
도전섬유의 전자파 차폐특성에 미치는 섬유구조 및 도금방법의 영향
김동현;이성준;
[Kim, DongHyun;Lee, SeongJoon;]
주식회사엠에스씨;
MSC Co. Ldt.;
한국표면공학회지, Vol. 48, No. 4, pp. 149-157.
Improving Conductivity of Metal Grids by Controlling Sintering Process
배선 함몰 전극의 배선 소결공정 최적화에 따른 전기적 특성 향상
안원민;정성훈;김도근;
[Ahn, Wonmin;Jung, Sunghoon;Kim, Do-Geun;]
재료연구소 표면기술연구본부 플라즈마공정연구실;
Plasma Processing Technology Department, Korea Institute of Materials Science;
한국표면공학회지, Vol. 48, No. 4, pp. 158-162.
Graphene Doping by Ammonia Plasma Surface Treatment
암모니아 플라즈마 표면처리를 통한 그래핀의 질소도핑
이병주;정구환;
[Lee, Byeong-Joo;Jeong, Goo-Hwan;]
강원대학교 대학원 신소재공학과;
Advanced Materials Science and Engineering, Graduate School of Kangwon National University;
한국표면공학회지, Vol. 48, No. 4, pp. 163-168.
Characterization of Hydrazine Solution Processed Multi-layered CuInSe2 Thin Films
하이드라진 용액법으로 형성된 CuInSe2 다층 박막 분석
정중희;
[Chung, Choong-Heui;]
한밭대학교 신소재공학과;
Department of Materials Science and Engineering, Hanbat National University;
한국표면공학회지, Vol. 48, No. 4, pp. 169-173.
Emission Characteristics of Dual-Side Emission OLED with Al Cathode Thickness Variation
Al 음극 두께 변화에 따른 양면 발광 OLED의 발광 특성
김지현;주성후;
[Kim, Ji-Hyun;Ju, Sung-Hoo;]
대진대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 4, pp. 174-178.
Analysis of contaminated QMS, cleaning and restoration of functions
오염된 QMS의 원인 분석과 세정 및 기능 복원
김동훈;주정훈;
[Kim, Donghoon;Joo, Junghoon;]
군산대학교 대학원 플라즈마 융합공학과;
Department of Plasma Convergence Engineering, Kunsan National University;
한국표면공학회지, Vol. 48, No. 4, pp. 179-184.
A Study on How to Improve Magnesium Anodizing Process with High Biocompatibility
[Kwon, Sang-jun;Hur, Jin-young;Lee, Chang-Myeon;Jang, Kwan-seop;Moon, Sung-mo;Lee, Hong-kee;]
Korea Institute of Industrial Technology;YKMC Inc.;Korea Institute of Materials Science;
한국표면공학회지, Vol. 48, No. 5, pp. 185-193.
A Blade-Abrading Method for Surface Pretreatment of Mg Alloys
[Moon, Sungmo;]
Korea Institute of Materials Science;
한국표면공학회지, Vol. 48, No. 5, pp. 194-198.
Microstructure Analysis of Ni-P-rGO Electroless Composite Plating Layer for PEM Fuel Cell Separator
고분자전해질 연료전지 분리판을 위한 Ni-P-rGO 무전해 복합도금층의 미세조직 분석
[Kim, Yeonjae;Kim, Jungsoo;Jang, Jaeho;Park, Won-Wook;Nam, Dae-Geun;]
Dongnam Regional Division, Korea Institute of Industrial Technology;Department of Nano Science & Engineering, Inje University;
한국표면공학회지, Vol. 48, No. 5, pp. 199-204.
Effect of Inductively Coupled Plasma on the Microstructure, Structure and Mechanical Properties of NbN Coatings
유도결합 플라즈마 파워가 NbN 코팅막의 미세구조, 결정구조 및 기계적 특성에 미치는 영향에 관한 연구
전성용;
[Chun, Sung-Yong;]
목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering Mokpo National University;
한국표면공학회지, Vol. 48, No. 5, pp. 205-210.
Luminescence Properties of Ba3Si6O12N2:Eu2+ Green Phosphor
[Luong, Van Duong;Doan, Dinh Phuong;Lee, Hong-Ro;]
Institute of Materials Science, Vietnam Academy of Science and Technology;Department of Advanced Materials Engineering, Chungnam National University;
한국표면공학회지, Vol. 48, No. 5, pp. 211-217.
Development of a Metal Cladding with Protective SiC Composites and the Characteristics on High temperature Oxidation
SiC 복합체 보호막 금속 피복관의 개발 및 고온산화 특성 분석
노선호;이동희;박광헌;
[Noh, Seonho;Lee, Dong-hee;Park, Kwangheon;]
한국원자력연구원 핵주기공정개발부;경희대학교 원자력공학과;
Korea Atomic Energy Research Institute;Department of Nuclear Engineering, Kyung Hee University;
한국표면공학회지, Vol. 48, No. 5, pp. 218-226.
Corrosion analysis of the duplex aluminum alloys
듀플렉스 알루미늄 합금의 내식성 분석
최인규;김시명;김상호;
[Choi, In Kyu;Kim, Si Myeong;Kim, Sang Ho;]
한국기술교육대학교 에너지.신소재.화학공학부;
School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education;
한국표면공학회지, Vol. 48, No. 5, pp. 227-232.
A Study on the Potassium Gettering in Al-1%Si/SiO2/PSG Multilevel Thin Films
Al-1%Si/SiO2/PSG 적층 박막에서 potassium 게터링에 관한 연구
김진영;
[Kim, Jin Young;]
광운대학교 전자재료공학과;
Department of Electronic Materials Engineering, Kwangwoon University;
한국표면공학회지, Vol. 48, No. 5, pp. 233-237.
Ethanol Sensing Properties of TiO2 Nanowires Sensor Decorated with Au Nanoparticles
Au 나노입자가 코팅된 TiO2 나노와이어의 에탄올가스 검출 특성
강우승;
[Kang, Wooseung;]
인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;
한국표면공학회지, Vol. 48, No. 5, pp. 238-244.
Chemical Vapor Deposition of Inorganic Thin Films using Atmospheric Plasma : A Review of Research Trend
상압 플라즈마를 이용한 무기박막의 화학기상 증착법에 대한 연구동향
김경남;이승민;염근영;
[Kim, Kyong Nam;Lee, Seung Min;Yeom, Geun Young;]
성균관대학교 신소재공학부;
School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU);
한국표면공학회지, Vol. 48, No. 5, pp. 245-252.
A Study on Characteristics of the Ni-Pd Alloy Electroplating
Ni-Pd 합금 전해도금의 특성에 관한 연구
조은상;정대곤;조진기;
[Cho, Eun-Sang;Jung, Dae-Gon;Cho, Jin-Ki;]
한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;
한국표면공학회지, Vol. 48, No. 6, pp. 253-259.
Effect of Heat Treatment on Interface Behavior in Ni-P/Cr Double Layer
열처리 시간에 따른 Ni-P/Cr 이중 도금 층의 계면 거동에 관한 연구
최명희;박영배;이병호;변응선;이규환;
[Choi, Myung-Hee;Park, Young-Bae;Rhee, Byong-ho;Byon, Eungsun;Lee, Kyu Hwan;]
한국기계연구원 부설 재료 연구소 표면기술연구본부;국립안동대학교 신소재공학부 청정에너지소재기술연구센터;주식회사 비츠로테크;
Surface Technology Division, Korea Institute of Materials Science;School of Materials Science and Engineering, Andong National University;VITZROTECH Co., Ltd.;
한국표면공학회지, Vol. 48, No. 6, pp. 260-268.
[Lee, Insup;]
Department of Advanced Materials Engineering, Dongeui University;
한국표면공학회지, Vol. 48, No. 6, pp. 269-274.
Investigating the Cause of Hindrance to the Interfacial Bonding of INCONEL 718 Layer Deposited by Kinetic Spray Process
저온 분사 공정을 이용해 적층된 INCONEL 718의 계면접합 저해요인 분석
김재익;이승태;이창희;
[Kim, Jaeick;Lee, Seungtae;Lee, Changhee;]
한양대학교 신소재공학과 저온 분사 코팅 연구실;
Kinetic Spray Coating Laboratory (NRL), Division of Materials Science and Engineering, Hanyang University;
한국표면공학회지, Vol. 48, No. 6, pp. 275-282.
Effects of TiN Coating on the Fatigue Fracture of Dental Implant System with Various Cyclic Loads
[Jung, Da-Un;Chung, Chae-Heon;Son, Mee-Kyoung;Choe, Han-Cheol;]
Prosthetic Dentistry, SMG-SNU Borame Medical Center;Department of Prosthodontics, College of Dentistry, Chosun University;Department of Dental Materials, Research Center of Nano-Interface Activation for Biomaterials, & Research Center for Oral Disease Regulation of the Aged, College of Dentistry, Chosun University;
한국표면공학회지, Vol. 48, No. 6, pp. 283-291.
Structural and Optical Properties of ITZO Deposited by RF Magnetron Sputtering
RF 마그네트론 스퍼터링 법으로 제작한 ITZO 박막의 구조 및 광학적 특성
김동렬;배지환;황동현;손영국;
[Kim, Dong Ryeol;Bae, Ji Hwan;Hwang, Dong Hyun;Son, Young Guk;]
부산대학교 재료공학부;신라대학교 신소재공학과;
Department of Materials Science and Engineering, Pusan National University;Department of Materials Science and Engineering, Silla University;
한국표면공학회지, Vol. 48, No. 6, pp. 292-296.
Heat Spreading Properties of CVD Diamond Coated Al Heat Sink
CVD 다이아몬드가 코팅된 알루미늄 방열판의 방열 특성
윤민영;임종환;강찬형;
[Yoon, Min Young;Im, Jong Hwan;Kang, Chan Hyoung;]
한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;
한국표면공학회지, Vol. 48, No. 6, pp. 297-302.
NO2 Sensing Properties of β-Bi2O3 Nanowires Sensor Coated with Pd Nanoparticles
Pd 나노입자가 코팅된 β-Bi2O3 나노와이어의 NO2 검출 특성
박성훈;강우승;
[Park, Sunghoon;Kang, Wooseung;]
인하대학교 신소재공학과;인하공업전문대학 금속재료과;
Department of Materials Science & Engineering, Inha University;Department of Metallurgical & Materials Engineering, Inha Technical College;
한국표면공학회지, Vol. 48, No. 6, pp. 303-308.
Hydrogen Sensing Properties of Multiwall Carbon Nanotubes Decorated with TiO2 Nanoparticles at Room Temperature
TiO2 나노입자가 코팅된 다중 벽 탄소 나노튜브의 상온에서의 수소 가스 검출 특성
박성훈;강우승;
[Park, Sunghoon;Kang, Wooseung;]
인하대학교 신소재공학과;인하공업전문대학 금속재료과;
Department of Materials Science & Engineering, Inha University;Department of Metallurgical & Materials Engineering, Inha Technical College;
한국표면공학회지, Vol. 48, No. 6, pp. 309-314.
Fabrication and Characterization of La2Zr2O7/YSZ Double-Ceramic-Layer Thermal Barrier Coatings Fabricated by Suspension Plasma Spray
서스펜션 플라즈마 용사법을 이용한 La2Zr2O7/YSZ 2층세라믹 열차폐코팅의 제조와 특성평가
권창섭;이수진;이성민;오윤석;김형태;장병국;김성원;
[Kwon, Chang-Sup;Lee, Sujin;Lee, Sung-Min;Oh, Yoon-Suk;Kim, Hyung-Tae;Jang, Byung-Koog;Kim, Seongwon;]
한국세라믹기술원 이천분원 엔지니어링세라믹팀;물질.재료연구기구(NIMS) 선진고온재료유닛트;
Engineering Ceramic Team, Korea Institute of Ceramic Engineering and Technology;High Temperature Materials Unit, National Institute for Materials Science;
한국표면공학회지, Vol. 48, No. 6, pp. 315-321.
[Lee, Seok Ryeol;Choi, Jae Ha;Lee, Ho Seong;]
Analytical Technology Team, LG display;School of Materials Science and Engineering, Kyungpook National University;
한국표면공학회지, Vol. 48, No. 6, pp. 322-328.
The Influence of Heat Treatment Temperature on Microstructure and Corrosion Behavior of SDSS Tube
SDSS (Super Duplex Stainless Steel) 강관의 미세조직 및 부식특성에 미치는 열처리 온도의 영향
이인섭;천창석;임태홍;한윤호;이면학;
[Lee, Insup;Cheon, Chang-seok;Yim, Tai-Hong;Han, Yoon-Ho;Lee, Myon-Hag;]
동의대학교 신소재공학과;한국생산기술연구원;(주)트리스;
Department of Advanced Materials Engineering, Dongeui university;Korea Institute of Industrial Technology;TRIS;
한국표면공학회지, Vol. 48, No. 6, pp. 329-334.
Characteristics of GMA Weld Zone on TiO2 Different Component Flux Cored Wire for S500 Grade Steel
TiO2 성분 플럭스충진와이어에 따른 S500강의 GMA 용접부 특성
유철;고영봉;박경채;
[Yoo, Cheol;Ko, Young-Bong;Park, Kyeung-Chae;]
현대종합금속 기술연구소;한국화학융합시험연구원;경북대학교 공과대학 신소재공학과;
Technical Institute of Hyundai Welding Co., LTD.;Korea Testing & Research Institute (KTR);Dept. of Materials Science and Metallurgical Engineering, Kyungpook National University;
한국표면공학회지, Vol. 48, No. 6, pp. 335-342.
Electrochemical Characteristics of Arc Zn Thermal Spray Coating Layer in Sea Water
해수 내 아크 아연 용사코팅 층의 전기화학적 특성
박일초;서광철;이경우;김성종;
[Park, Il-Cho;Seo, Gwang-Cheol;Lee, Gyeong-Woo;Kim, Seong-Jong;]
목포해양대학교 기관시스템공학부;목포해양대학교 조선해양공학과;
Division of Marine Engineering, Mokpo National Maritime University;Department of Naval Archltecture and Ocean Engineering, Mokpo National Maritime University;
한국표면공학회지, Vol. 48, No. 6, pp. 343-348.
Cavitation Damage Behavior of Inconel 625 Coating Layer by Arc Thermal Spraying Method in Sea Water
아크 용사법을 이용한 Inconel 625 코팅 층의 해수 내 캐비테이션 손상 거동
박일초;김성종;
[Park, Il-Cho;Kim, Seong-Jong;]
목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;
한국표면공학회지, Vol. 48, No. 6, pp. 349-353.
Evaluation of Electrochemical Corrosion Characteristics for Hot-Dip Aluminized 304 Stainless Steel in Seawater
알루미늄 용융 도금된 304 스테인리스강의 해수 내 전기화학적 부식 특성 평가
정상옥;박일초;한민수;김성종;
[Chong, Sang-Ok;Park, Il-Cho;Han, Min-Su;Kim, Seong-Jong;]
목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo Maritime University;
한국표면공학회지, Vol. 48, No. 6, pp. 354-359.
Application of Pulsed Plasmas for Nanoscale Etching of Semiconductor Devices : A Review
나노 반도체 소자를 위한 펄스 플라즈마 식각 기술
양경채;박성우;신태호;염근영;
[Yang, Kyung Chae;Park, Sung Woo;Shin, Tae Ho;Yeom, Geun Young;]
성균관대학교 신소재공학부;
School of Advanced Materials Science and Engineering, SungKyunKwan University (SKKU);
한국표면공학회지, Vol. 48, No. 6, pp. 360-370.
Abstract
PDF