저널

Study on Characteristics of Electrodeposited Thin Copper Film by Inorganic Additives in Pyrophosphate Copper Plating Bath
피로인산동욕의 무기첨가제에 의한 전해동박의 특성에 관한 연구

구석본;허진영;이홍기;
[Koo, Seokbon;Hur, Jinyoung;Lee, Hongkee;]

한국생산기술연구원 표면처리연구실용화그룹;
Surface Technology R & BD Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 47, No. 1, pp. 1-6.

DOI : 10.5695/JKISE.2014.47.1.001

The Effect of Hydrogen in the Nuclear Fuel Cladding on the Oxidation under High Temperature and High Pressure Steam
고압 수증기하 산화에서 핵연료 피복관내 수소효과 연구

정윤목;정성기;박광헌;노선호;
[Jung, Yunmock;Jeong, Seonggi;Park, Kwangheon;Noh, Seonho;]

경희대학교 원자력공학과;한국전력기술 원자로계통설계그룹;
Department of Nuclear Engineering, Kyunghee University;KEPCO E&C, Nuclear System Department;

한국표면공학회지, Vol. 47, No. 1, pp. 7-12.

DOI : 10.5695/JKISE.2014.47.1.007

Characterization of DLC Coated Surface of Fe-3.0%Ni-0.7%Cr-1.4%Mn-X Steel
DLC 코팅한 Fe-3.0%Ni-0.7%Cr-1.4%Mn-X강의 표면특성평가

장재철;김송희;
[Jang, Jaecheol;Kim, Song-Hee;]

강원대학교 나노응용공학과;
Department of Nano Applied Engineering, Kangwon National University;

한국표면공학회지, Vol. 47, No. 1, pp. 13-19.

DOI : 10.5695/JKISE.2014.47.1.013

Crystallization of Amorphous Silicon Films Using Joule Heating

[Ro, Jae-Sang;]

Department of Materials Science and Engineering, Hongik University;

한국표면공학회지, Vol. 47, No. 1, pp. 20-24.

DOI : 10.5695/JKISE.2014.47.1.020

Effects of Shot Peening Projection Pressure on Electrochemical Characteristics of ALBC3 Alloy in Seawater
ALBC3 합금의 해수 내 전기화학적 특성에 미치는 쇼트피닝 분사압력의 영향

한민수;임명환;김성종;
[Han, Min-Su;Im, Myeong-Hwan;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;목포해양대학교 실습선;
Division of Marine System Engineering, Mokpo Maritime University;Training Ship, Mokpo Maritime University;

한국표면공학회지, Vol. 47, No. 1, pp. 25-32.

DOI : 10.5695/JKISE.2014.47.1.025

Nanoindenter Test of 680MPa Dual Phase Steel Charged with Hydrogen
수소주입시킨 680MPa DP강의 나노인덴터 시험

최종운;박재우;강계명;
[Choi, Jong-Woon;Park, Jae-Woo;Kang, Kae-Myung;]

서울과학기술대학교 신소재공학과;서울과학기술대학교 에너지환경대학원;
Department of Materials Science and Engineering, Seoul National University of Science & Technology;Department of New Energy Engineering, Graduate School of Energy & Environment, Seoul National University of Science & Technology;

한국표면공학회지, Vol. 47, No. 1, pp. 33-38.

DOI : 10.5695/JKISE.2014.47.1.033

Formation of Environment Friendly Electrodeposition Films by CO₂ Gas Dissolved in Seawater and Their Corrosion Resistance
해수 중 CO₂ 기체의 유입에 의한 환경 친화적인 전착 코팅막의 형성과 그 내식특성

이성준;김혜민;이슬기;문경만;이명훈;
[Lee, Sung-Joon;Kim, Hye-Min;Lee, Seul-Gee;Moon, Kyung-Man;Lee, Myeong-Hoon;]

한국해양대학교 기관공학부;한국해양대학교 조선기자재공학부;
Division of Marine Engineering, Korea Maritime and Ocean University;Department of Marine Equipment Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 47, No. 1, pp. 39-47.

DOI : 10.5695/JKISE.2014.47.1.039

Electric Conductivities of LaCl₃-KCl Binary Melts
용융 LaCl₃-KCl 2성분계 혼합염의 전기전도도

김기호;
[Kim, Kiho;]

충북대학교 신소재공학과;
New Materials Eng. Dep`t, Chungbuk National University;

한국표면공학회지, Vol. 47, No. 1, pp. 48-52.

DOI : 10.5695/JKISE.2014.47.1.048

I-V Characteristics of Negatively DC Pulsed Target in ECR Plasma for Landmine Detection
지뢰탐지를 위한 ECR 플라즈마에서 타깃에 고전압 DC 펄스 인가시 전압-전류 특성 분석

김성봉;이희재;박승일;유석재;조무현;한승훈;임병옥;
[Kim, Seong Bong;Lee, Hui Jea;Park, Seungil;Yoo, Suk Jae;Cho, Moohyun;Han, Seung-Hoon;Lim, Byeongok;]

국가핵융합연구소 플라즈마기술연구센터;포항공과대학교 물리학과;삼성탈레스 ISR/PGM 연구소;
Plasma Technology Research Center;Department of Physics, Pohang University of Science and Technology;Samsung Thales;

한국표면공학회지, Vol. 47, No. 1, pp. 53-56.

DOI : 10.5695/JKISE.2014.47.1.053

The Influence of Weathering Conditions on the Outer Membrane of Biogas with Plasticized PVC : A Study using Non-destructive Tests

[Kim, Changhwan;Ki, Wootae;Kim, SangMyung;Shin, Jinyong;]

Weathering Technology Assessment Center, Korea Conformity Laboratories;Department of Computer Applied Mechinery, Korea Polytechnic University;Energy & Environment Business Division, Korea Conformity Laboratories;

한국표면공학회지, Vol. 47, No. 2, pp. 57-62.

DOI : 10.5695/JKISE.2014.47.2.057

The Electrochemical Migration Phenomenon of the Ni-Cr Seed Layer of Sputtered FCCL

[Ahn, Woo-Young;Jang, Joong Soon;]

3M AST Ltd.;Department of Industrial Engineering, Ajou University;

한국표면공학회지, Vol. 47, No. 2, pp. 63-67.

DOI : 10.5695/JKISE.2014.47.2.063

A Study on the Seed Step-coverage Enhancement Process (SSEP) of High Aspect Ratio Through Silicon Via (TSV) Using Pd/Cu/PVP Colloids
Pd/Cu/PVP 콜로이드를 이용한 고종횡비 실리콘 관통전극 내 구리씨앗층의 단차피복도 개선에 관한 연구

이동열;이유진;김현종;이민형;
[Lee, Dongryul;Lee, Yugin;Kim, Hyung-Jong;Lee, Min Hyung;]

한국생산기술연구원 표면처리연구실용화그룹;
Surface Technology R&BD Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 47, No. 2, pp. 68-74.

DOI : 10.5695/JKISE.2014.47.2.068

Nanocrystalline Diamond Coating on Steel with SiC Interlayer
철강 위에 SiC 중간층을 사용한 나노결정질 다이아몬드 코팅

명재우;강찬형;
[Myung, Jae-Woo;Kang, Chan Hyoung;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 47, No. 2, pp. 75-80.

DOI : 10.5695/JKISE.2014.47.2.075

Influence of Post-deposition Annealing Temperature on the Properties of GZO/Al Thin Film
진공열처리 온도에 따른 GZO/Al 적층박막의 구조적, 전기적, 광학적 특성 변화

김선경;김승홍;김소영;전재현;공태경;윤대영;최동용;최동혁;손동일;김대일;
[Kim, Sun-Kyung;Kim, Seung-Hong;Kim, So-Young;Jeon, Jae-Hyun;Gong, Tae-Kyung;Yoon, DaeYoung;Choi, DongYong;Choi, Dong-Hyuk;Son, Dong-Il;Kim, Daeil;]

울산대학교 첨단소재공학부;동국실업 주식회사;
School of Materials Science and Engineering, University of Ulsan;Dongkook Ind. Co., Ltd.;

한국표면공학회지, Vol. 47, No. 2, pp. 81-85.

DOI : 10.5695/JKISE.2014.47.2.081

A Comparative Study of CrN Coatings Deposited by DC and Asymmetric Bipolar Pulsed DC Sputtering
DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 제작된 CrN 코팅막의 물성 비교연구

전성용;백지원;
[Chun, Sung-Yong;Baek, Ji-Won;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 47, No. 2, pp. 86-92.

DOI : 10.5695/JKISE.2014.47.2.086

Oxidation of Cr₂AlC Carbides at 700-1000℃ in Air
Cr₂AlC 탄화물의 700-1000℃에서의 대기중 산화

원성빈;황연상;이동복;
[Won, Sung Bin;Hwang, Yeon Sang;Lee, Dong Bok;]

성균관대학교 신소재공학부;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 47, No. 2, pp. 93-98.

DOI : 10.5695/JKISE.2014.47.2.093

Encapsulation Method of Flexible OLED Using SiN_x and Metal Film
SiN_x와 금속막을 이용한 플렉시블 OLED 봉지 방법

이효선;주성후;
[Lee, Hyoe Sun;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 47, No. 3, pp. 99-103.

DOI : 10.5695/JKISE.2014.47.3.099

Emission Characteristics of Blue Fluorescence Tandem OLED Using MoO_x
MoO_x를 사용한 청색 형광 Tandem OLED의 발광 특성

곽태호;주성후;
[Kwak, Tea-Ho;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 47, No. 3, pp. 104-108.

DOI : 10.5695/JKISE.2014.47.3.104

Indium Tin Oxide (ITO) Nano Thin Films Deposited by a Modulated Pulse Sputtering at Room Temperature
모듈레이티드 펄스 스퍼터링으로 상온 증착한 Indium-Tin-Oxide (ITO) 나노 박막

유영군;정진용;주정훈;
[You, Younggoon;Jeong, Jinyong;Joo, Junghoon;]

군산대학교 공과대학 신소재공학과 플라즈마 소재 응용 센터;
Department of Materials Science and Engineering, Plasma Materials Research Center Kunsan National University;

한국표면공학회지, Vol. 47, No. 3, pp. 109-115.

DOI : 10.5695/JKISE.2014.47.3.109

Study on Improvement of Mechanical Properties after Heat Treatment of Hard Chromium Electrodeposits with Additives
첨가제에 의한 경질 크롬 도금 층의 열처리 후 기계적 특성 향상에 관한 연구

강수영;이대원;
[Kang, Soo Young;Lee, Dae Won;]

인하공업전문대학 금속재료과;인하대학교 신소재공학부;
Dept. of Metallurgical & Material Engineering, Inha Technical College;School of materials science and engineering, Inha University;

한국표면공학회지, Vol. 47, No. 3, pp. 116-120.

DOI : 10.5695/JKISE.2014.47.3.116

Study on Improvement of Corrosion Resistance and Wear Resistance by Anodizing and Sealing Treatment with Nano-diamond Powder on aluminum
알루미늄의 아노다이징과 나노 다이아몬드 분말 봉공처리에 의한 내식성과 내마모성 향상에 관한 연구

강수영;이대원;
[Kang, Soo Young;Lee, Dae Won;]

인하공업전문대학 금속재료과;인하대학교 신소재공학부;
Dept. of Metallurgical & Material Engineering, Inha Technical College;School of materials science and engineering, Inha University;

한국표면공학회지, Vol. 47, No. 3, pp. 121-127.

DOI : 10.5695/JKISE.2014.47.3.121

Study of Etching Method for Plating Layer Formation of ABS Resin
ABS 수지상의 도금층 형성을 위한 에칭 방법 연구

최경수;최기덕;신현준;이상기;최순돈;
[Choi, Kyoung Su;Choi, Ki Duk;Shin, Hyun Jun;Lee, Sang-Ki;Choi, Soon Don;]

영남대학교 신소재 공학부;영남이공대학 기계공학과;가야대학교 보석디자인학과;
School of Materials Science and Engineering, Yeungnam University;Division of mechanical engineering technology, yeungnam collage of science&technology;Department of Gem Design Kaya University;

한국표면공학회지, Vol. 47, No. 3, pp. 128-136.

DOI : 10.5695/JKISE.2014.47.3.128

Study on the Physical Properties by Combining Epoxy and Acryl Electrodeposition Paints
에폭시와 아크릴 전착도료의 혼용성에 따른 물성 변화 연구

정성수;이동욱;김동원;김명환;곽삼탁;문명준;
[Jung, Sung Soo;Yi, Dong Uk;Kim, Dong Won;Kim, Myung Hwan;Kwag, Sam Tag;Moon, Myung Jun;]

부경대학교 공업화학과;한국생산기술연구원 중소기업기술인력지원단;
Department of Industrial Chemistry, Pukyong National University;DongNam Technology Human Resource Support Center, Korea Institute of Industrial Technology(KITECH);

한국표면공학회지, Vol. 47, No. 3, pp. 137-146.

DOI : 10.5695/JKISE.2014.47.3.137

Effects of Hydroxide and Silicate ions on the Plasma Electrolytic Oxidation of AZ31 Mg Alloy
AZ31 마그네슘 합금의 플라즈마전해산화 피막 형성에 미치는 수산화 이온 및 규산 이온의 영향

문성모;양철남;나상조;
[Moon, Sungmo;Yang, Cheolnam;Na, Sangjo;]

재료연구소;동진금속;
Korea Institute of Materials Science;Dongjin Metal.Co., Ltd.;

한국표면공학회지, Vol. 47, No. 4, pp. 147-154.

DOI : 10.5695/JKISE.2014.47.4.147

Formation Behavior of Anodic Oxide Films on Al7075 Alloy in Sulfuric Acid Solution
황산용액에서 Al7075 합금 표면의 양극산화피막 형성거동

문성모;양철남;나상조;
[Moon, Sungmo;Yang, Cheolnam;Na, Sangjo;]

재료연구소;동진금속;
Korea Institute of Materials Science;Dongjin Metal. Co., Ltd.;

한국표면공학회지, Vol. 47, No. 4, pp. 155-161.

DOI : 10.5695/JKISE.2014.47.4.155

Effect of Complexing Agents on Adhesion Strength between Electroless Copper Film and Ta Diffusion Barrier
무전해 구리 도금액에서 착화제가 접합력에 미치는 영향에 대한 고찰

이창면;전준미;허진영;이홍기;
[Lee, Chang-Myeon;Jeon, Jun-Mi;Hur, Jin-Young;Lee, Hong-Kee;]

한국생산기술연구원 표면처리연구실용화그룹;
Surface Technology R &BD Group, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 47, No. 4, pp. 162-167.

DOI : 10.5695/JKISE.2014.47.4.162

A Comparative Study of TiAlN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Magnetron Sputtering
DC 스퍼터법과 비대칭 바이폴라 펄스 DC 스퍼터법으로 증착된 TiAlN 코팅막의 물성 비교연구

전성용;이태양;
[Chun, Sung-Yong;Lee, Tae Yang;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 47, No. 4, pp. 168-173.

DOI : 10.5695/JKISE.2014.47.4.168

Mechanical Properties of TiAlSiN films Coated by Hybrid Process
하이브리드 공정으로 제조한 TiAlSiN 박막의 특성

송민아;양지훈;정재훈;김성환;정재인;
[Song, Min-A;Yang, Ji-Hoon;Jung, Jae-Hun;Kim, Sung-Hwan;Jeong, Jae-In;]

포항산업과학연구원 시스템솔루션연구센터;
System Solution Research Center, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 47, No. 4, pp. 174-180.

DOI : 10.5695/JKISE.2014.47.4.174

Characteristics of IGZO Films Formed by Room Temperature with Thermal Annealing Temperature
상온에서 증착된 IGZO 박막의 열처리 온도에 따른 특성

이석열;이경택;김재열;양명수;강인병;이호성;
[Lee, Seok-Ryeol;Lee, Kyong-Taik;Kim, Jae-Yeal;Yang, Myoung-Su;Kang, In-Byeong;Lee, Ho-Seong;]

LG Display 연구소;경북대학교 신소재공학부;
LG Display Laboratory;School of Materials Science and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 47, No. 4, pp. 181-185.

DOI : 10.5695/JKISE.2014.47.4.181

Effect of Heat Treatment on the Corrosion Resistance of the Al-Mg Coated Steel Sheet
열처리가 Al-Mg 코팅 강판의 내식성에 미치는 영향

정재훈;양지훈;송민아;김성환;정재인;이명훈;
[Jung, Jae-Hun;Yang, Ji-Hoon;Song, Min-A;Kim, Sung-Hwan;Jeong, Jae-In;Lee, Myeong-Hoon;]

포항산업과학연구원 시스템솔루션연구센터;한국해양대학교;
System Solution Research Center, Research Institute of Industrial Science & Technology;Korea Maritime and Ocean University;

한국표면공학회지, Vol. 47, No. 4, pp. 186-191.

DOI : 10.5695/JKISE.2014.47.4.186

Synthesis and Luminescence Properties of Sr/SmSi₅N₈:Eu²⁺ Phosphor for White Light-Emitting-Diode

[Luong, Van Duong;Lee, Hong-Ro;]

Department of Nano Materials Engineering, Chungnam National University;

한국표면공학회지, Vol. 47, No. 4, pp. 192-197.

DOI : 10.5695/JKISE.2014.47.4.192

Effects of Precursor Concentration and Current on Properties of ZnO Nanorod Grown by Electrodeposition Method
전착법으로 성장된 산화아연 나노막대의 특성에 전구체 농도 및 전착 전류가 미치는 효과

박영빈;남기웅;박선희;문지윤;김동완;강해리;김하은;이욱빈;임재영;
[Park, Youngbin;Nam, Giwoong;Park, Seonhee;Moon, Jiyun;Kim, Dongwan;Kang, Hae Ri;Kim, Haeun;Lee, Wookbin;Leem, Jae-Young;]

인제대학교 나노공학부;
Department of Nano Engineering, Inje University;

한국표면공학회지, Vol. 47, No. 4, pp. 198-203.

DOI : 10.5695/JKISE.2014.47.4.198

Effects of Growth Temperature and Time on Properties of ZnO Nanostructures Grown by Electrodeposition Method
Electrodeposition에 의해 성장온도와 시간을 달리하여 성장한 ZnO 나노구조의 특성

박영빈;남기웅;박선희;문지윤;김동완;강해리;김하은;이욱빈;임재영;
[Park, Youngbin;Nam, Giwoong;Park, Seonhee;Moon, Jiyun;Kim, Dongwan;Kang, Hae Ri;Kim, Haeun;Lee, Wookbin;Leem, Jae-Young;]

인제대학교 나노공학부;
Department of Nano Engineering, Inje University;

한국표면공학회지, Vol. 47, No. 4, pp. 204-209.

DOI : 10.5695/JKISE.2014.47.4.204

Emission Characteristics of Blue Fluorescence Tandem OLED with Materials of CGL
CGL의 재료에 따른 청색 형광 Tandem OLED의 발광 특성

곽태호;주성후;
[Kwak, Tea-Ho;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 47, No. 4, pp. 210-214.

DOI : 10.5695/JKISE.2014.47.4.210

Palladium-Nickel Alloy Electrodeposition Using Ethylenediamine as Complexing Agent
에틸렌디아민을 착화제로 사용하는 팔라듐-니켈 합금도금

최병하;손호상;김경태;손인준;
[Choi, Byungha;Sohn, Ho-Sang;Kim, Kyung Tae;Son, Injoon;]

경북대학교 신소재공학부 금속신소재공학전공;재료연구소 분말기술연구실;
Department of Materials Science and Metallurgy, Kyungpook National University;Powder & Ceramic Materials Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 47, No. 5, pp. 215-220.

DOI : 10.5695/JKISE.2014.47.5.215

The Influence of Pulse Frequency and Duty Factor on Surface Characteristics during Low Temperature Plasma Nitrocarburizing Treatment of Duplex Stainless Steel
Duplex Stainless Steel의 저온 플라즈마 침질탄화시 Pulse Frequency 및 Duty Factor에 따른 표면 특성평가

천창석;이인섭;
[Cheon, Chang-Seok;Lee, Insup;]

동의대학교 신소재공학과;
Department of Advanced Materials Engineering, Dongeui university;

한국표면공학회지, Vol. 47, No. 5, pp. 221-226.

DOI : 10.5695/JKISE.2014.47.5.221

Study of the Diffusion of Phosphorus Dependent on Temperatures for Selective Emitter Doping Process of Atmospheric Pressure Plasma
대기압 플라즈마의 선택적 도핑 공정에서 온도에 의한 인(Phosphorus)의 확산연구

김상훈;윤명수;박종인;구제환;김인태;최은하;조광섭;권기청;
[Kim, Sang Hun;Yun, Myoung Soo;Park, Jong In;Koo, Je Huan;Kim, In Tae;Choi, Eun Ha;Cho, Guangsup;Kwon, Gi-Chung;]

광운대학교 전자바이오물리학과;광운대학교 화학과;
Kwangwoon University of Department of Electrical and Biological Physics;Kwangwoon University of Department of Chemistry;

한국표면공학회지, Vol. 47, No. 5, pp. 227-232.

DOI : 10.5695/JKISE.2014.47.5.227

Optical Design of Light Guide Plate Material for Slim Liquid Crystal Display
박형 디스플레이를 위한 도광판의 광학설계

공태원;최규진;권진혁;박인식;이선묵;우동진;곽진석;
[Gong, Taewon;Choi, Gyu Jin;Kwon, Jin Hyuk;Park, In Shik;Lee, Sunmook;Woo, DongJin;Gwag, Jin Seog;]

영남대학교 물리학과;한울정보기술;한국건설생활환경시험연구원;
Department of Physics, Yeungnam University;Hanwool Information Tech.;Korea Conformity Laboratories;

한국표면공학회지, Vol. 47, No. 5, pp. 233-238.

DOI : 10.5695/JKISE.2014.47.5.233

Electrical and Optical Properties of Amorphous ITZO Deposited at Room Temperature by RF Magnetron Sputtering
RF 마그네트론 스퍼터링법으로 상온 증착된 비정질 ITZO 산화물의 전기적 및 광학적 특성

이기창;조광민;이준형;김정주;허영우;
[Lee, Ki Chang;Jo, Kwang-Min;Lee, Joon-Hyung;Kim, Jeong-Joo;Heo, Young-Woo;]

경북대학교, 신소재공학부;
School of Materials Science and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 47, No. 5, pp. 239-243.

DOI : 10.5695/JKISE.2014.47.5.239

Self-healing Coatings for Corrosion Protection: A Review of Recent Advances
자기치유 부식방지 코팅의 최근 동향

박병규;
[Park, Byoung Kyeu;]

한국과학기술정보연구원;
ReSEAT Program, Korea Institute of Science and Technology Information(KISTI);

한국표면공학회지, Vol. 47, No. 5, pp. 244-251.

DOI : 10.5695/JKISE.2014.47.5.244

High-temperature Oxidation of the TiAlCrSiN Film Deposited on the Cemented Hard Carbide

[Lee, Dong Bok;]

School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 47, No. 5, pp. 252-256.

DOI : 10.5695/JKISE.2014.47.5.252

Hydrogen Embrittlement of 680 MPa DP sheet steel with Electrochemical Hydrogen charging conditions of Two Electrolytes
2종 전해질에서의 전기화학적 수소주입조건에 따른 680 MPa DP 박강판의 수소취성

박재우;강계명;
[Park, Jae-Woo;Kang, Kae-Myung;]

서울과학기술대학교 에너지환경대학원 신에너지공학과;서울과학기술대학교 신소재공학과;
Dept. of New Energy Engineering, Graduate School of Energy & Environment, Seoul National University of Science & Technology;Dept. of Materials Science & Engineering, Seoul National University of Science & Technology;

한국표면공학회지, Vol. 47, No. 5, pp. 257-262.

DOI : 10.5695/JKISE.2014.47.5.257

Nanocrystalline Diamond Coated SiC Balls in Tribometer
나노결정질 다이아몬드가 코팅된 SiC 마모시험기 볼

임종환;강찬형;
[Im, Jong Hwan;Kang, Chan Hyoung;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 47, No. 5, pp. 263-268.

DOI : 10.5695/JKISE.2014.47.5.263

Preparation of Conductive Silicone Rubber Sheets by Electroless Nickel Plating
무전해 니켈도금에 의한 도전성 실리콘고무 시트의 제조

이병우;이진희;
[Lee, Byeong Woo;Lee, Jin Hee;]

한국해양대학교 재료공학과;
Department of Materials Engineering, Korea Maritime University;

한국표면공학회지, Vol. 47, No. 5, pp. 269-274.

DOI : 10.5695/JKISE.2014.47.5.269

Ultrasound Assisted Sn-Ag-Pd Activation Process for Electroless Copper Plating
무전해 동 도금을 위한 초음파 적용 주석-은-팔라듐 활성화 공정에 대한 연구

이창면;허진영;이홍기;
[Lee, Chang-Myeon;Hur, Jin-Young;Lee, Hong-Kee;]

한국생산기술연구원, 인천지역본부, 표면처리연구실용화그룹;
Heat Treatment & Plating Technology Center, Incheon Regional Division, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 47, No. 6, pp. 275-281.

DOI : 10.5695/JKISE.2014.47.6.275

Plasma Surface Treatment of Aluminum Extrusion Die
알루미늄 압출용 금형의 플라즈마 표면처리

최인규;이수영;김상호;
[Choi, In Kyu;Lee, Su Young;Kim, Sang Ho;]

한국기술교육대학교 에너지.신소재.화학공학부;
School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education;

한국표면공학회지, Vol. 47, No. 6, pp. 282-286.

DOI : 10.5695/JKISE.2014.47.6.282

Enhancement of Surface Diffusivity for Waviness Evolution on Heteroepitaxial Thin Films

[Kim, Yun Young;]

Department of Mechanical Engineering, Northwestern University;

한국표면공학회지, Vol. 47, No. 6, pp. 287-292.

DOI : 10.5695/JKISE.2014.47.6.287

The Effect of Heat Treatment on the Thermal Expansion Behavior of Electroformed Nano-crystalline Fe-42 wt%Ni Alloy

[Lee, Minsu;Han, Yunho;Yim, Tai Hong;]

Surface Technology R&BD Group, Korea Institute of Industrial Technology (KITECH);

한국표면공학회지, Vol. 47, No. 6, pp. 293-296.

DOI : 10.5695/JKISE.2014.47.6.293

NO₂ gas sensing properties of UV activated ZnS nanowires at room temperature
상온에서 UV 활성화된 ZnS 나노와이어의 NO₂ 가스 검출 특성

강우승;
[Kang, Wooseung;]

인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 47, No. 6, pp. 297-302.

DOI : 10.5695/JKISE.2014.47.6.297

The Effect of Grain Size on the Stress Shift toward Tensile Side by Deposition Interruptions in Copper Thin Films
구리 박막 제조중 증착 중단시 박막 결정립 크기 변화가 인장응력 방향으로의 응력 이동에 미치는 영향

이세리;오승근;김영만;
[Lee, Seri;Oh, Seungkeun;Kim, Youngman;]

전남대학교 신소재공학부;
Department of Materials Science and Engineering, Chonnam National University;

한국표면공학회지, Vol. 47, No. 6, pp. 303-310.

DOI : 10.5695/JKISE.2014.47.6.303

Electrical Properties of ITO Thin Film Deposited by Reactive DC Magnetron Sputtering using Various Sn Concentration Target
반응성 DC 마그네트론 스퍼터링법으로 증착한 ITO 박막의 전기적 특성 평가

김민제;정재헌;송풍근;
[Kim, Min-Je;Jung, Jae-Heon;Song, Pung-Keun;]

부산대학교 재료공학부;
Department of Material Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 47, No. 6, pp. 311-315.

DOI : 10.5695/JKISE.2014.47.6.311

Structure and Thermal Conductivity of Thermal Barrier Coatings in Lanthanum/Gadolinium Zirconate System Fabricated via Suspension Plasma Spray
서스펜션 플라즈마 용사로 제조된 란타눔/가돌리늄 지르코네이트 열차폐코팅의 구조와 열전도도 특성

권창섭;이성민;오윤석;김형태;장병국;김성원;
[Kwon, Chang-Sup;Lee, Sung-Min;Oh, Yoon-Suk;Kim, Hyung-Tae;Jang, Byung-Koog;Kim, Seongwon;]

한국세라믹기술원 이천분원 엔지니어링세라믹팀;물질.재료연구기구 (NIMS) 선진고온재료유닛트;
Engineering Ceramic Team, Korea Institute of Ceramic Engineering and Technology;High Temperature Materials Unit, National Institute for Materials Science;

한국표면공학회지, Vol. 47, No. 6, pp. 316-322.

DOI : 10.5695/JKISE.2014.47.6.316

Effect of Sealing Materials and Parameters on the Corrosion Resistance of HVOF-Sprayed CrC-NiCr Coatings
실링재 및 실링방법이 HVOF 용사된 CrC-NiCr 코팅의 내식성에 미치는 영향

정영훈;남욱희;변응선;강태일;강정윤;
[Jeong, Younghun;Nam, Uk-Hee;Byon, Eungsun;Kang, Tae-Il;Kang, Chung-Yun;]

재료연구소 표면기술연구본부 플라즈마코팅연구실;동양기전(주) 유압기기사업부, 연구개발팀;부산대학교 공과대학 재료공학부;
Surface Technology Department, Korea Institute of Materials and Science;Hydraulic Machinery Division, Dongyang Mechatronics;School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 47, No. 6, pp. 323-329.

DOI : 10.5695/JKISE.2014.47.6.323

The Study on the Corrosion Property of the Zn-Mg Alloy Coatings with Various Mg Contents using EIS Measurement
EIS 분석을 통한 Mg 함량에 따른 Zn-Mg 박막의 부식 특성에 관한 연구

배기태;라정현;김광배;이상율;
[Bae, Ki-Tae;La, Joung-Hyun;Kim, Kwang-Bae;Lee, Sang-Yul;]

한국항공대학교 표면기술응용연구센터;
Center for Surface Technology and Applications, Department of Materials Engineering, Korea Aerospace University;

한국표면공학회지, Vol. 47, No. 6, pp. 330-334.

DOI : 10.5695/JKISE.2014.47.6.330

A Study on the Weathering of RCD`S Housing
누전차단기 하우징의 내후성에 관한 연구

김창환;신진용;강병철;김상명;
[Kim, Chang-Hwan;Shin, Jin-Yong;Kang, Byung-Chul;Kim, Sang-Mung;]

한국건설생활환경시험연구원 에너지환경사업본부;
Energy & Environment Business Division, Korea Conformity Laboratories;

한국표면공학회지, Vol. 47, No. 6, pp. 335-340.

DOI : 10.5695/JKISE.2014.47.6.335

Effect of Electron Irradiation Energy on the Properties of GZO/SiO₂ Thin Films on Polycarbonate
PC 기판위에 증착된 SiO₂/GZO박막의 전자빔 조사에너지에 따른 특성 변화

허성보;박민재;정우창;김대일;차병철;
[Heo, Sung-Bo;Park, Min-Jae;Jung, Uoo-Chang;Kim, Dae-Il;Cha, Byung-Chul;]

한국생산기술연구원;울산대학교 재료공학과;
Korea Institute of Industrial Technology (KITECH);School of materials science and Engineering, University of Ulsan;

한국표면공학회지, Vol. 47, No. 6, pp. 341-346.

DOI : 10.5695/JKISE.2014.47.6.341

Synthesis of Single-Walled Carbon Nanotubes for Enhancement of Horizontal-Alignment and Density
단일벽 탄소나노튜브의 수평배향도 및 밀도 향상 합성

곽은혜;임호빈;정구환;
[Kwak, Eun-Hye;Im, Ho-Bin;Jeong, Goo-Hwan;]

강원대학교 대학원 신소재공학과;강원대학교 공과대학 나노응용공학과;
Advanced Materials Science and Engineering, Graduate School of Kangwon National University;Department of Nano Applied Engineering, Kangwon National University;

한국표면공학회지, Vol. 47, No. 6, pp. 347-353.

DOI : 10.5695/JKISE.2014.47.6.347

Endurance and Compatibility of Silicon Carbide as Fluidized Bed Reactor for Poly-silicon
폴리실리콘용 유동층 반응기에서 탄화규소의 내구성과 적합성 연구

최균;서진원;한윤수;손민수;
[Choi, Kyoon;Seo, Jin Won;Hahn, Yoon Soo;Son, Min Soo;]

한국세라믹기술원 이천분원;(주)실리콘밸류;
Icheon Branch, Korea Institute of Ceramic Eng. & Tech.;Siliconvalue Co., Ltd.;

한국표면공학회지, Vol. 47, No. 6, pp. 354-361.

DOI : 10.5695/JKISE.2014.47.6.354

Design and Fabrication of Dual Tip Si₃N₄ Probe for Dip-pen Nanolithograpy
Dip-pen nanolithography를 위한 이중 팁을 가진 질화규소 프로브의 설계 및 제조

김경호;한윤수;
[Kim, Kyung Ho;Han, Yoonsoo;]

한국세라믹기술원 이천분원, 엔지니어링세라믹팀;
Engineering Ceramic Team, KICET Ichron Branch;

한국표면공학회지, Vol. 47, No. 6, pp. 362-367.

DOI : 10.5695/JKISE.2014.47.6.362