한국표면공학회

군산대학교 공과대학 신소재공학과, 플라즈마 소재 응용 센터;한국과학기술연구원;
Department of Materials Science and Engineering, Plasma Materials Research Center Kunsan National University;Korea Institute of Science and Technology;

한국표면공학회지, Vol. 45, No. 2, pp. 89-94.

DOI : 10.5695/JKISE.2012.45.2.089

Abstract

PDF

공학

A Study of pH, Duty Cycle, Agitation on the Property of Co-deposited TiO₂ and Thermal Stability in the Electrodeposited Ni-TiO₂ Composite
pH, duty cycle, 교반, 첨가제가 Ni-TiO₂ 전기도금 복합체의 TiO₂ 공석특성과 열적안정성에 미치는 영향 연구

김명진;김정수;김동진;김홍표;황성식;
[Kim, Myong-Jin;Kim, Joung-Soo;Kim, Dong-Jin;Kim, Hong-Pyo;Hwang, Seong-Sik;]

한국원자력연구원 원자력재료기술개발부;
Nuclear Materials Research Division, Korea Atomic Energy Research Institute;

한국표면공학회지, Vol. 45, No. 3, pp. 97-105.

DOI : 10.5695/JKISE.2012.45.3.097

Abstract

PDF

Properties of TiN Films Fabricated by Oblique Angle Deposition
빗각 증착으로 제조된 TiN 박막의 특성

정재훈;양지훈;박혜선;송민아;정재인;
[Jung, Jae-Hun;Yang, Ji-Hoon;Park, Hye-Sun;Song, Min-A;Jeong, Jae-In;]

포항산업과학연구원 융합소재연구본부;
Hybrid Materials Research Department, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 45, No. 3, pp. 106-110.

DOI : 10.5695/JKISE.2012.45.3.106

Abstract

PDF

Characteristics of Al Films Prepared by Oblique Angle Deposition
빗각 증착으로 제조한 Al 박막의 특성

박혜선;양지훈;정재훈;송민아;정재인;
[Park, Hye-Sun;Yang, Ji-Hoon;Jung, Jae-Hun;Song, Min-A;Jeong, Jae-In;]

포항산업과학연구원 융합소재연구본부;
Hybrid Materials Research Department, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 45, No. 3, pp. 111-116.

DOI : 10.5695/JKISE.2012.45.3.111

Abstract

PDF

Effect of Annealing on the Electrical Property and Water Permeability of ZTO/GZO Double-layered TCO Films Deposited by DC, RF Magnetron Co-sputtering
DC, RF 마그네트론 코스퍼터링법으로 증착한 ZTO/GZO 투명전도성막의 열처리 조건이 박막의 물성에 미치는 영향

오성훈;강세원;이건환;정우석;송풍근;
[Oh, Sung-Hoon;Kang, Sae-Won;Lee, Gun-Hwan;Jung, Woo-Seok;Song, Pung-Keun;]

부산대학교 재료공학부;한국기계연구원 재료연구소;한국전자통신연구원;
Department of Materials Science and Engineering, Pusan National University;Korea Institute of Materials Science (KIMS);Electronics and Telecommunications Research Institute (ETRI);

한국표면공학회지, Vol. 45, No. 3, pp. 117-122.

DOI : 10.5695/JKISE.2012.45.3.117

Abstract

PDF

A Comparative Study of CrN Coatings Deposited by DC and Inductively Coupled Plasma Magnetron Sputtering
DC 스퍼터법과 유도결합 플라즈마 마그네트론 스퍼터법으로 증착된 CrN 코팅막의 물성 비교연구

서대한;전성용;
[Seo, Dae-Han;Chun, Sung-Yong;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 45, No. 3, pp. 123-129.

DOI : 10.5695/JKISE.2012.45.3.123

Abstract

PDF

The Change of Microstructures According to the Charging Amounts of Hydrogen in High Strength DP Steels and TRIP Steel
고강도 DP강과 TRIP강의 표면 수소 주입량에 따른 수소취성평가

이철치;박재우;강계명;
[Lee, Chul-Chi;Park, Jae-Woo;Kang, Kae-Myung;]

서울과학기술대학교 산업대학원 재료공학과;서울과학기술대학교 에너지환경대학원 신에너지공학과;서울과학기술대학교 신소재공학과;
Dept. of Materials Science and Engineering, The Graduate School of Industry & Engineering, SNUST;Dept. of New Energy Engineering, The Graduate School of Energy & Environment, SNUST;Dept. of Materials Science & Engineering, SNUST;

한국표면공학회지, Vol. 45, No. 3, pp. 130-135.

DOI : 10.5695/JKISE.2012.45.3.130

Abstract

PDF

Composition Analysis and Thermodynamic Care for Replication of Ancient Metallic Type
고대 금속활자의 복제를 위한 성분분석과 열역학적 주의 점

김기호;
[Kim, Ki-Ho;]

충북대학교 신소재공학과;
Department of New Materials Eng., Chungbuk National University;

한국표면공학회지, Vol. 45, No. 3, pp. 136-141.

DOI : 10.5695/JKISE.2012.45.3.136

Abstract

PDF

공학

Experimental Study of Nd:YAG Laser Cleaning System for Removing Acrylic Resin and Surface Characteristic
Nd:YAG 레이저를 이용한 금속유물에 코팅된 아크릴수지의 제거 및 표면 특성 연구

이혜연;조남철;
[Lee, Hye-Youn;Cho, Nam-Chul;]

국립문화재연구소 복원기술연구실;공주대학교 문화재보존과학과;
National Research Institute of Cultural Heritage;Department of Cultural Heritage Conservation Science, Kongju National University;

한국표면공학회지, Vol. 45, No. 4, pp. 143-150.

DOI : 10.5695/JKISE.2012.45.4.143

Abstract

PDF

Development of Surface Treatment for Hydrophobic Property on Aluminum Surface
알루미늄의 발수 표면처리 기술 개발

변은연;이승훈;김종국;김양도;김도근;
[Byun, Eun-Yeon;Lee, Seung-Hun;Kim, Jong-Kuk;Kim, Yang-Do;Kim, Do-Geun;]

재료연구소 표면기술연구본부 플라즈마코팅연구실;부산대학교 재료공학부;
Plasma Coating Technology Department, Korea Institute of Materials Science;Material Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 45, No. 4, pp. 151-154.

DOI : 10.5695/JKISE.2012.45.4.151

Abstract

PDF

Effect of CaO and Hot Rolling on the High Temperature Oxidation of Magnesium Alloys
CaO 첨가와 열간압연이 마그네슘 합금의 고온산화에 미치는 영향

;;원성빈;이동복;
[Xu, Chunyu;Trung, Trinh Van;Won, Sung-Bin;Lee, Dong-Bok;]

성균관대학교 신소재공학과;울산대학교 첨단소재공학부;
School of Advanced Materials Science and Engineering, Sungkyunkwan University;School of Materials Science and Engineering, University of Ulsan;

한국표면공학회지, Vol. 45, No. 4, pp. 155-161.

DOI : 10.5695/JKISE.2012.45.4.155

Abstract

PDF

Evaluation of Corrosion and Surface Resistance of Ni-P_x/C Multi Layer
Ni-P_x/C 다층 도금층의 내식성과 표면 전기저항 평가

박제식;정은경;이철경;
[Park, Je-Sik;Jung, Eun-Kyung;Lee, Churl-Kyoung;]

금오공과대학교 신소재시스템공학부;(주) 지오데코 부설연구소;
School of Advanced Materials and System Eng., Kumoh National Institute of Technology;Research Center, Jiodeco Co. Ltd.;

한국표면공학회지, Vol. 45, No. 4, pp. 162-167.

DOI : 10.5695/JKISE.2012.45.4.162

Abstract

PDF

A Diagnostic Study of Pulsed Plasma Process for Reactive Deposition
반응성 증착용 펄스 플라즈마 공정의 진단

주정훈;
[Joo, Jung-Hoon;]

군산대학교 신소재공학과, 플라즈마 소재응용센터;
Department of Materials Science and Engineering & Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 45, No. 4, pp. 168-173.

DOI : 10.5695/JKISE.2012.45.4.168

Abstract

PDF

Numerical Modeling of a Rectangular Type Inductively Coupled Plasma System
사각형 유도 결합 플라즈마 시스템의 수치 모델링

주정훈;
[Joo, Jung-Hoon;]

군산대학교 신소재공학과, 플라즈마 소재응용센터;
Department of Materials Science and Engineering & Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 45, No. 4, pp. 174-180.

DOI : 10.5695/JKISE.2012.45.4.174

Abstract

PDF

공학

Characteristics of Friction Stir Lap Weldment according to Joining Parameter in 5052 Aluminium Alloy
5052 알루미늄 합금에서 접합변수에 따른 겹치기 마찰교반접합부의 특성

고영봉;박경채;
[Ko, Young-Bong;Park, Kyeung-Chae;]

한국화학융합시험연구원;경북대학교 금속신소재공학과;
Korea Testing & Research Institute (KTR);Dept. of Materials Science and Metallurgy, Kyungpook National University;

한국표면공학회지, Vol. 45, No. 5, pp. 181-187.

DOI : 10.5695/JKISE.2012.45.5.181

Abstract

PDF

The Characteristics of Hetero Junction Using NiCuZn Ferrite and Dielectric for LTCC
LTCC를 위한 NiCuZn 페라이트계와 유전체의 이종접합의 특성

김남현;박현;김경남;
[Kim, Nam Hyun;Park, Hyun;Kim, Kyung Nam;]

강원대학교 신소재공학과;
Department of Advanced Material Engineering, Kangwon National University;

한국표면공학회지, Vol. 45, No. 5, pp. 188-192.

DOI : 10.5695/JKISE.2012.45.5.188

Abstract

PDF

Enhancement of Photoluminescence Intensity of ZnS Nanowires by Annealing in O₂
산소 분위기에서 열처리시 ZnS 나노선의 발광 강도 변화

권진업;이종우;
[Kwon, Jin-Up;Lee, Jong-Woo;]

한국폴리텍대학 인천캠퍼스 신소재응용학과;
Dept. of Advanced Material Eng., Incheon Campus Korea Polytechnicll College;

한국표면공학회지, Vol. 45, No. 5, pp. 193-197.

DOI : 10.5695/JKISE.2012.45.5.193

Abstract

PDF

Corrosion Characteristics of the Sulfuric Acid Anodized Film Formed on Al6070 Alloy in Nitric Acid Vapor Environment
질산가스분위기에서 황산 양극산화 피막처리된 Al6070 합금의 부식특성

장일호;정도영;국진선;
[Chang, Il Ho;Jung, Do Young;Gook, Jin Seon;]

국방기술품질원;(주)한화 여수사업장;한려대학교 방사선학과;
Defense Agency for Technology and Quality;Yeosu Factory, Hanwha Corporation;Department of Radiology, Hanlyo University;

한국표면공학회지, Vol. 45, No. 5, pp. 198-205.

DOI : 10.5695/JKISE.2012.45.5.198

Abstract

PDF

Process Diagnosis of Reactive Deposition of MgO by ICP Sputtering System
유도결합 플라즈마 스퍼터링 장치에서 MgO의 반응성 증착 시 공정 진단

주정훈;
[Joo, Junghoon;]

군산대학교 신소재공학과, 플라즈마 소재응용센터;
Department of Materials Science and Engineering & Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 45, No. 5, pp. 206-211.

DOI : 10.5695/JKISE.2012.45.5.206

Abstract

PDF

The Effect of Hydrogen in Automobile High Strength Steel Sheets Charged with Hydrogen by Using Electrochemical Method
전기화학적 방법으로 수소장입시킨 자동차 강판재의 수소 영향

박재우;강계명;
[Park, Jae-Woo;Kang, Kae-Myung;]

서울과학기술대학교 에너지환경대학원 신에너지공학과;서울과학기술대학교 신소재공학과;
Dept. of New Energy Engineering, The Graduate School of Energy & Environment, SNUST;Dept. of Materials Science & Engineering, SNUST;

한국표면공학회지, Vol. 45, No. 5, pp. 212-217.

DOI : 10.5695/JKISE.2012.45.5.212

Abstract

PDF

공학

Study on Passive Layer Characteristics of Chemically Passivated Duplex Stainless Steel
화학적 부동태 처리에 따른 듀플렉스 스테인리스 강의 피막 특성에 관한 연구

장휘운;이정훈;김용환;정원섭;
[Jang, Heui-Un;Lee, Jung-Hoon;Kim, Yong-Hwan;Chung, Won-Sub;]

부산대학교 재료공학과;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 45, No. 6, pp. 219-225.

DOI : 10.5695/JKISE.2012.45.6.219

Abstract

PDF

Characteristics of Carburized Surface Layers in 0.18C-3.5Ni-1.5Cr-0.2Mo Steels for Main Shaft Bearings of Wind Turbines
풍력발전시스템의 주 베어링용 0.18C-3.5Ni-1.5Cr-0.2Mo강의 침탄 표면특성

최병영;구윤식;
[Choi, Byung-Young;Gub, Yoon-Sik;]

전북대학교 신소재공학부 및 신소재개발연구센터;전북대학교 대학원 금속공학과;
School of Advanced Materials Engineering and Research Institute of Advanced Materials Development, Chonbuk National University;Graduate School of Metallurgical Engineering, Chonbuk National University;

한국표면공학회지, Vol. 45, No. 6, pp. 226-231.

DOI : 10.5695/JKISE.2012.45.6.226

Abstract

PDF

Syntheses and Properties of Quaternary Cr-Ti-B-N Coatings by a High Power Impulse Magnetron Sputtering Technique

[Myoung, Hee-Bok;Zhang, Teng Fei;Park, Jong-Keuk;Kim, Doo-In;Kim, Kwang Ho;]

School of Materials Science and Engineering, Pusan National University;Electronic Materials Center, Korea Institute of Science and Technology;National Core Research Center for Hybrid Materials Solution, Pusan National University;

한국표면공학회지, Vol. 45, No. 6, pp. 232-241.

DOI : 10.5695/JKISE.2011.45.6.232

Abstract

PDF

High Temperature Durability Amorphous ITO:Yb Films Deposited by Magnetron Co-Sputtering

[Jung, Tae Dong;Song, Pung Keun;]

National Core Research Center for Hybrid Materials Solution, Pusan National University;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 45, No. 6, pp. 242-247.

DOI : 10.5695/JKISE.2012.45.6.242

Abstract

PDF

A Study on the Surface Pre-treatment of Palladium Alloy Hydrogen Membrane
팔라듐 합금 수소 분리막의 전처리에 관한 연구

박동건;김형주;김효진;김동원;
[Park, Dong-Gun;Kim, Hyung-Ju;Kim, Hyo Jin;Kim, Dong-Won;]

경기대학교 신소재공학과;
Department of Advanced Materials Engineering, Kyonggi University;

한국표면공학회지, Vol. 45, No. 6, pp. 248-256.

DOI : 10.5695/JKISE.2012.45.6.248

Abstract

PDF

Effects of Bilayer Period on the Microhardness and Its Strengthening Mechanism of CrN/AlN Superlattice Coatings

[Kim, SungMin;Kim, EunYoung;Kim, DongJun;La, JoungHyun;Lee, SangYul;]

Center for Surface Technology and Applications, Department of Material Engineering, Korea Aerospace University;

한국표면공학회지, Vol. 45, No. 6, pp. 257-263.

DOI : 10.5695/JKISE.2012.45.6.257

Abstract

PDF

Behaviors of Cavitation Damage in Seawater for HVOF Spray Coated Layer with WC-10Co4Cr on Cu Alloy
WC-10Co4Cr으로 초고속 화염용사 코팅된 Cu 합금의 해수내 캐비테이션 손상 거동

한민수;김민성;장석기;김성종;
[Han, Min-Su;Kim, Min-Sung;Jang, Seok-Ki;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;(주)디섹;
Faculty of Marine Engineering, Mokpo Maritime University;DSEC;

한국표면공학회지, Vol. 45, No. 6, pp. 264-271.

DOI : 10.5695/JKISE.2012.45.6.264

Abstract

PDF

Evaluation on Potentiostatic Characteristics of Al-4.06Mg-0.74Mn Alloy with Cavitation Environment in Seawater
Al-4.06Mg-0.74Mn 합금의 해수 내 캐비테이션 환경에 따른 정전위 특성 평가

이승준;한민수;장석기;김성종;
[Lee, Seung-Jun;Han, Min-Su;Jang, Seok-Ki;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 45, No. 6, pp. 272-277.

DOI : 10.5695/JKISE.2012.45.6.272

Abstract

PDF

Characteristics Evaluation with Cavitation Condition of 304 Stainless Steel in Seawater Environment
해수 환경 하에서 304 스테인리스강의 캐비테이션 조건에 따른 특성 평가

장석기;정상옥;한민수;김성종;
[Jang, Seok-Ki;Chong, Sang-Ok;Han, Min-Su;Kim, Seong-Jong;]

Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 45, No. 6, pp. 278-283.

DOI : 10.5695/JKISE.2012.45.6.278

Abstract

PDF

The Influence of Hydrogen Charging with the Volume Fraction of Phases in Dual Phase Steels
다상조직강의 조직 분율에 따른 수소주입의 영향

김한상;강계명;
[Kim, Han-Sang;Kang, Kae-Myung;]

가천대학교 기계.자동차공학과;서울과학기술대학교 신소재공학과;
Dept. of Mechanical and Automotive Engineering, Gachon University;Dept. of Materials Science and Engineering, Seoul National University of Science & Technology;

한국표면공학회지, Vol. 45, No. 6, pp. 284-288.

DOI : 10.5695/JKISE.2012.45.6.284

Abstract

PDF