저널

Investigation on the Effect of Organic Additives on the Electroformed Cu Deposits with Micro-patterns
유기물 첨가제가 마이크로 패턴 구리 전주 도금에 미치는 영향 연구

이주열;김만;이규환;임성봉;이종일;
[Lee, Joo-Yul;Kim, Man;Lee, Kyu-Hwan;Yim, Seong-Bong;Lee, Jong-Il;]

한국기계연구원 부설 재료연구소 융합공정연구본부;
Materials Processing Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 43, No. 1, pp. 1-6.

DOI : 10.5695/JKISE.2010.43.1.001

Behavior of Solid Phase Crystallization of Amorphous Silicon Films at High Temperatures according to Raman Spectroscopy
라만 분석을 통한 비정질 실리콘 박막의 고온 고상 결정화 거동

홍원의;노재상;
[Hong, Won-Eui;Ro, Jae-Sang;]

홍익대학교 공과대학 신소재 공학과;
Department of Materials Science and Engineering, Hongik University;

한국표면공학회지, Vol. 43, No. 1, pp. 7-11.

DOI : 10.5695/JKISE.2010.43.1.007

Fractal Approach to Passivated Surface of Stainless Steel

[Heo, Jung-Ho;Lee, Yong-Heon;Shin, Heon-Cheol;]

School of Materials Science and Engineering, Pusan National University;Stainless Steel Research Group, POSCO;

한국표면공학회지, Vol. 43, No. 1, pp. 12-16.

DOI : 10.5695/JKISE.2010.43.1.012

Surface Characteristics of Dental Implant Fixture with Various Manufacturing Process
치과 임플란트 고정체의 여러 가지 제조공정과정에 따른 표면특성

정용훈;문영필;이충환;유진우;최한철;
[Jeong, Yong-Hoon;Moon, Young-Pil;Lee, Chung-Hwan;Yu, Jin-Woo;Choe, Han-Cheol;]

조선대학교 치의학전문대학원 치과재료학교실 및 생체재료나노계면활성화센터;조선대학교 치의학전문대학원 보철학교실;신경대학교;
Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, School of Dentistry, Chosun University;Department of Prosthodontics, School of Dentistry, Chosun University;Shingyeong University;

한국표면공학회지, Vol. 43, No. 1, pp. 17-24.

DOI : 10.5695/JKISE.2010.43.1.017

Corrosion Behavior of Nanotube Formed on the Bone Plate of Ti-6Al-4V Alloy for Dental Use
치과용 Ti-6Al-4V 합금 골 고정판 표면에 형성된 나노튜브의 부식거동

김원기;이충환;정재헌;최한철;
[Kim, Won-Gi;Lee, Chung-Hwan;Chung, Chae-Heon;Choe, Han-Cheol;]

조선대학교 치의학전문대학원 치과재료학교실 및 생체재료나노계면활성화센터;조선대학교 치의학전문대학원 보철학교실;
Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, School of Dentistry, Chosun University;Department of Prosthodontics, School of Dentistry, Chosun University;

한국표면공학회지, Vol. 43, No. 1, pp. 25-30.

DOI : 10.5695/JKISE.2010.43.1.025

High Temperature Corrosion of Ni-17%W Coatings in Ar-0.2%SO₂ Atmosphere

[Lee, Dong-Bok;Kwon, Sik-Chol;]

School of Advanced Materials Science and Engineering, Sungkyunkwan University;Functional Coatings Group, Korea Institute of Materials Science;

한국표면공학회지, Vol. 43, No. 1, pp. 31-35.

DOI : 10.5695/JKISE.2010.43.1.031

Characterization of Air and SO₂ Gas Corrosion of Silicon Carbide Nanofibers
탄화규소 나노섬유의 고온 대기 및 SO₂ 가스분위기에서의 부식물성

김민정;이동복;
[Kim, Min-Jung;Lee, Dong-Bok;]

성균관대학교 신소재공학과;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 43, No. 1, pp. 36-40.

DOI : 10.5695/JKISE.2010.43.1.036

Effect of Lubricant Addition in Terms of Volume Fraction on Fabrication of Cu/Sn Bonded Diamond Micro Blades
다이아몬드 마이크로 블레이드 제조에 있어 부피비의 관점에서 본 윤활제 첨가 효과

문종철;김송희;
[Moon, Jong-Chul;Kim, Song-Hee;]

강원대학교 신소재공학과;
Dept. of Advenced Materials Engineering, Kangwon National Univ.;

한국표면공학회지, Vol. 43, No. 1, pp. 41-45.

DOI : 10.5695/JKISE.2010.43.1.041

Two-step Electroless Plated Pt Ohmic Contacts to p-type InGaAs

[Im, Hung-Su;Wang, Kai;Kim, Geun-Woo;Chang, Ji-Ho;Koo, Bon-Heun;]

School of Nano Advanced Materials Engineering, Changwon National University;Major of Semiconductor Physics, Korea Maritime University;

한국표면공학회지, Vol. 43, No. 2, pp. 47-50.

DOI : 10.5695/JKISE.2010.43.2.047

Effects of Chloride Concentration on Zinc Electroplating
염화물의 농도가 전기아연도금에 미치는 영향

김재민;이정훈;김용환;김영하;홍문희;정훤우;정원섭;
[Kim, Jae-Min;Lee, Jung-Hoon;Kim, Yong-Hwan;Kim, Young-Ha;Hong, Moon-Hi;Jeong, Hwon-Woo;Chung, Won-Sub;]

부산대학교 재료공학과;포스코 도금부;
Deprtment of Materials Science and Engineering, Pusan National University;Surface Treatment Department, POSCO;

한국표면공학회지, Vol. 43, No. 2, pp. 51-56.

DOI : 10.5695/JKISE.2010.43.2.051

Study on Thermal Stability of Ni-P-Fe and Ni-P-B Layers Electroplated on Alloy 600
Alloy 600에 전기 도금한 Ni-P-Fe 및 Ni-P-B 층의 열적 안정성 연구

김명진;김정수;김동진;김홍표;
[Kim, Myong-Jin;Kim, Joung-Soo;Kim, Dong-Jin;Kim, Hong-Pyo;]

한국원자력연구원, 원자력재료연구부;
Korea Atomic Energy Research Institute, Nuclear Materials Research Division;

한국표면공학회지, Vol. 43, No. 2, pp. 57-63.

DOI : 10.5695/JKISE.2010.43.2.057

A Study of Optimization of Electrodeposited CuSnZn Alloys Electrolyte and Process

[Hur, Jin-Young;Lee, Ho-Nyun;Lee, Hong-Kee;]

Heat Surface Technology Service Center, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 43, No. 2, pp. 64-72.

DOI : 10.5695/JKISE.2010.43.2.064

Characteristics Evaluation of Conversion Coating of Acid Pickling AZ31 Magnesium Alloy by a Chromium-Free Phosphate-Permanganate Solution
비크롬계 인산-과망간산 용액을 이용한 AZ31 마그네슘 합금의 산처리에 따른 화성 피막의 특성 평가

김명환;곽삼탁;문명준;
[Kim, Myung-Hwan;Kwag, Sam-Tag;Moon, Myung-Jun;]

부경대학교 화학공학과;부경대학교 공업화학과;
Department of Chemical Engineering, Pukyong National University;Department of Industrial Chemistry, Pukyong National University;

한국표면공학회지, Vol. 43, No. 2, pp. 73-79.

DOI : 10.5695/JKISE.2010.43.2.073

Surface Modification of WC-Co and SCM415 by the Ion Bombardment Process of Filtered Vacuum Arc Plasma
자장 여과 아크 이온빔 식각 공정을 이용한 WC-Co 및 SCM415 금속 소재 표면 구조 제어 연구

이승훈;윤성환;김도근;권정대;김종국;
[Lee, Seung-Hun;Yoon, Sung-Hwan;Kim, Do-Geun;Kwon, Jung-Dae;Kim, Jong-Kuk;]

한국기계연구원 부설 재료연구소;
Korea Institute of Materials Science;

한국표면공학회지, Vol. 43, No. 2, pp. 80-85.

DOI : 10.5695/JKISE.2010.43.2.080

Enhancement of Hardness and Moderation of Surface Defects of 14K, 18K Yellow Gold Alloy by Heat Treatment
열처리에 의한 14K, 18K yellow gold alloy의 경도 향상 및 표면 결함 완화

안지현;서진교;안용길;박종완;
[Ahn, Ji-Hyun;Seo, Jin-Kyo;Ahn, Yoeng-Gil;Park, Jong-Wang;]

한양대학교 나노공학과;한양대학교 신소재공학과;
Nano Engineering College of Engineering Hanyang University;Division of Materials Science and Engineering College of Engineering Hanyang University;

한국표면공학회지, Vol. 43, No. 2, pp. 86-90.

DOI : 10.5695/JKISE.2010.43.2.086

Ion Nitriding Using Pulsed D.C Glow Discharge Combined with Inductively Coupled Plasma
펄스직류방전과 유도결합방전의 복합에 의한 SCM440강의 이온질화

김윤기;
[Kim, Yoon-Kee;]

한밭대학교 공과대학 신소재공학부;
Department of Welding and Production Engineering, Hanbat National University;

한국표면공학회지, Vol. 43, No. 2, pp. 91-96.

DOI : 10.5695/JKISE.2010.43.2.091

Simulation on Reflectance from Solar Cell Surface Using Double Layered Anti-Reflective Coating
Double layer 반사방지막 구조에 대한 태양전지 표면 반사율 simulation

라창호;양청;유원종;
[Ra, Chang-Ho;Yang, Cheng;Yoo, Won-Jong;]

성균관대학교 나노과학기술협동학부;
Department of Nano Science and Technology, Sungkyunkwan University;

한국표면공학회지, Vol. 43, No. 2, pp. 97-104.

DOI : 10.5695/JKISE.2010.43.2.097

Comparison of Acidic and Alkaline Bath in Electroless Nickel Plating on Porous Carbon Substrate
다공성 탄소전극상 무전해 니켈도금의 산성과 알칼리용액 비교 연구

천소영;강인석;임영목;김두현;이재호;
[Chun, So-Young;Kang, In-Seok;Rhym, Young-Mok;Kim, Doo-Hyun;Lee, Jae-Ho;]

홍익대학교 신소재공학과;한국재료연구소 재료특성평가그룹;
Dept. of Materials Science and Engineering, Hongik University;Dept. of Materials Test and Characterization Group, Korea Institute of Materials Science;

한국표면공학회지, Vol. 43, No. 2, pp. 105-110.

DOI : 10.5695/JKISE.2010.43.2.105

Effects of Multi-Complex Agent Addition on Characteristics of Electroless Ni-P Solution
복합 착화제 첨가가 무전해 Ni-P 도금액의 특성에 미치는 영향

이홍기;이호년;전준미;허진영;
[Lee, Hong-Kee;Lee, Ho-Nyun;Jeon, Jun-Mi;Hur, Jin-Young;]

한국 생산기술연구원 인천기술지원본부 열표면기술지원센터;
Incheon Technology Service Division and Heat Treatment & Plating Technology Service Center, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 43, No. 2, pp. 111-120.

DOI : 10.5695/JKISE.2010.43.2.111

Effects of Current Density and Anodization Time on the Properties of Porous Si
양극산화 시간 및 전류밀도 변화에 따른 다공질 실리콘의 특성 변화

최현영;김민수;김군식;조민영;전수민;임광국;이동율;김진수;김종수;임재영;
[Choi, Hyun-Young;Kim, Min-Su;Kim, Ghun-Sik;Cho, Min-Young;Jeon, Su-Min;Yim, Kwang-Gug;Lee, Dong-Yul;Kim, Jin-Soo;Kim, Jong-Su;Leem, Jae-Young;]

인제대학교 나노메뉴팩처링연구소 나노시스템공학과;삼성 LED;전북대학교 신소재공학부;영남대학교 물리학과;
Department of Nano Systems Engineering, Center for Nano Manufacturing, Inje University;Samsung LED;Division of Advanced Materials Engineering, Chonbuk National University;Department of Physics, Yeungnam University;

한국표면공학회지, Vol. 43, No. 3, pp. 121-126.

DOI : 10.5695/JKISE.2010.43.3.121

Study on Adhesion of DLC Films with Interlayer
중간층을 이용한 DLC 박막의 밀착력에 관한 연구

김강삼;조용기;
[Kim, Gang-Sam;Cho, Yong-Ki;]

한국생산기술연구원;
Surface Technology and Heat Treatment R&D Department, Korea Institute of Industrial Technology (KITECH);

한국표면공학회지, Vol. 43, No. 3, pp. 127-131.

DOI : 10.5695/JKISE.2010.43.3.127

Surface Characteristics of Polymer Coated NiTi Alloy Wire for Orthodontics
폴리머 코팅된 NiTi합금 교정선의 표면특성

조주영;김원기;최환석;이호종;최한철;
[Cho, Joo-Young;Kim, Won-Gi;Choi, Hwan-Suk;Lee, Ho-Jong;Choe, Han-Cheol;]

조선대학교 치의학전문대학원 치과재료학교실 및 생체재료나노계면활성화센터;순천대학교 공과대학 미래전략신소재공학;
Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, School of Dentistry, Chosun University;Department of Materials Science & Metallurgical Engineering, Sunchon National University;

한국표면공학회지, Vol. 43, No. 3, pp. 132-141.

DOI : 10.5695/JKISE.2010.43.3.132

Evaluation of ENEPIG Surface Treatment for High-reliability PCB in Mobile Module

[Lee, Joon-Kyun;Yim, Young-Min;Seo, Jun-Ho;]

Korea Institute of Industrial Tecnology(KITECH), Surface and Heat Technology R&D Department;Poongwon Chemical;

한국표면공학회지, Vol. 43, No. 3, pp. 142-147.

DOI : 10.5695/JKISE.2010.43.3.142

Electrical and Optical Properties of Transparent Conducting Films having GZO/Metal/GZO Hybrid-structure; Effects of Metal Layer(Ag, Cu, Al, Zn)
GZO/Metal/GZO 하이브리드 구조 투명 전도막의 전기적, 광학적 특성; Ag, Cu, Al, Zn 금속 삽입층의 효과

김현범;김동호;이건환;김광호;
[Kim, Hyeon-Beom;Kim, Dong-Ho;Lee, Gun-Hwan;Kim, Kang-Ho;]

한국기계연구원 부설 재료연구소 기능박막연구그룹;부산대학교 국가핵심연구센터 하이브리드 소재 솔루션;
Functional Coatings Research Group, Korea Institute of Materials Science(KIMS);Hybrid Materials Solution, National Core Research Center, Pusan National University;

한국표면공학회지, Vol. 43, No. 3, pp. 148-153.

DOI : 10.5695/JKISE.2010.43.3.148

Numerical Modeling of Plasma Characteristics of ICP System with a Pulsed dc Bias
수치모델을 이용한 pulsed dc bias ICP장치의 플라즈마 특성 해석

주정훈;
[Joo, Jung-Hoon;]

군산대학교 공과대학 신소재공학과, 플라즈마 소재 응용 센터;
Department of Materials Science and Engineering and Plasma Materials Research Center, Kunsan National University;

한국표면공학회지, Vol. 43, No. 3, pp. 154-158.

DOI : 10.5695/JKISE.2010.43.3.154

Neural Network Modeling of Ion Energy Impact on Surface Roughness of SiN Thin Films
신경망을 이용한 SiN 박막 표면거칠기에의 이온에너지 영향 모델링

김병환;이주공;
[Kim, Byung-Whan;Lee, Joo-Kong;]

세종대학교 전자공학과;세종대학교 정보통신공학과;
Department of Electronic Engineering, Sejong University;Department of Information and Communication, Sejong University;

한국표면공학회지, Vol. 43, No. 3, pp. 159-164.

DOI : 10.5695/JKISE.2010.43.3.159

Effect of Plating Parameters on the Electrodeposition of Ni-alumina Nanocomposite

[Gyawalia, Gobinda;Woo, Dong-Jin;Lee, Soo-Wohn;]

Department of Metallurgy and Materials Engineering, Sun Moon University;Korea Institute of Construction Materials;Department of Environmental Engineering, Sun Moon University;

한국표면공학회지, Vol. 43, No. 4, pp. 165-169.

DOI : 10.5695/JKISE.2010.43.4.165

GaAs Epilayer Growth on Si(100) Substrates Cleaned by As/Ga Beam and Its RHEED Patterns
As과 Ga 빔 조사에 의해 세척된 Si(100) 기판 위에 GaAs 에피층 성장과 RHEED 패턴

임광국;김민수;임재영;
[Yim, Kwang-Gug;Kim, Min-Su;Leem, Jae-Young;]

인제대학교 나노시스템공학과;
Department of Nano Systems Engineering, Inje University;

한국표면공학회지, Vol. 43, No. 4, pp. 170-175.

DOI : 10.5695/JKISE.2010.43.4.170

As BEP Effects on the Properties of InAs Thin Films Grown on Tilted GaAs(100) Substrate
기울어진 GaAs(100) 기판 위에 성장된 InAs 박막 특성에 대한 As BEP 효과

김민수;임재영;
[Kim, Min-Su;Leem, Jae-Young;]

인제대학교 나노시스템공학과;
Department of Nano Systems Engineering, Inje University;

한국표면공학회지, Vol. 43, No. 4, pp. 176-179.

DOI : 10.5695/JKISE.2010.43.4.176

Morphological Studies on TiO₂ Nanotubes Formed by Anodizing in Aqueous and Non-Aqueous Solutions
수용액 및 비수용액에서 양극산화법으로 형성된 TiO₂ 나노튜브의 구조 연구

김병조;문성모;정용수;김병관;
[Kim, Byung-Jo;Moon, Sung-Mo;Jeong, Yong-Soo;Kim, Byung-Kwan;]

한국기계연구원 부설 재료연구소;창원대학교 화공시스템공학과;
Korea Institute of Materials Science;Department of Chemical Engineering, Changwon National University;

한국표면공학회지, Vol. 43, No. 4, pp. 180-186.

DOI : 10.5695/JKISE.2010.43.4.180

A Study on the Coloring of 304 Stainless Steel Screen for Reducing Light Reflectivity
304스테인리스강 스크린의 광 반사율 감소를 위한 착색 처리에 관한 연구

김기호;
[Kim, Ki-Ho;]

충북대학교 신소재공학과;
Department of New Materials Eng., Chungbuk National University;

한국표면공학회지, Vol. 43, No. 4, pp. 187-193.

DOI : 10.5695/JKISE.2010.43.4.187

Properties of Indium Doped Zinc Oxide Thin Films Deposited by RF Magnetron Sputtering

[Bang, Joon-Ho;Park, Se-Hun;Cho, Sang-Hyun;Song, Pung-Keun;]

Department of Materials Science and Engineering, Pusan National University;Nano Convergence Practical Application Center, Daegu Technopark;

한국표면공학회지, Vol. 43, No. 4, pp. 194-198.

DOI : 10.5695/JKISE.2010.43.4.194

Effect of Electropolishing Process on Corrosion Resistance of Co-Cr Alloy
Co-Cr alloy의 전해연마에 따른 부식의 영향

박제민;김완철;
[Park, Je-Min;Kim, Wan-Cheol;]

홍익대학교 과학기술대학 금속공학과;
School of Materials Science and Engineering Hongik University;

한국표면공학회지, Vol. 43, No. 4, pp. 199-204.

DOI : 10.5695/JKISE.2010.43.4.199

Analysis on the Scales formed on the Heat Affected Zone of Low Carbon Steel Weld in NaCl and H₂S Water Solutions
저탄소강 용접열영향부의 NaCl, H₂S 수용액에서 생성되는 부식스케일 분석

김민정;배동호;이동복;
[Kim, Min-Jung;Bae, Dong-Ho;Lee, Dong-Bok;]

성균관대학교 신소재공학과;성균관대학교 기계공학과;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;School of Mechanical Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 43, No. 4, pp. 205-210.

DOI : 10.5695/JKISE.2010.43.4.205

Development of Automatic Transmission Parts by Using Vacuum Carburizing Heat-treatment Technology
진공침탄 공정기술을 이용한 자동변속기 부품 개발

이원범;문경일;조용기;임경묵;변상교;
[Lee, Won-Beom;Moon, Gyung-Il;Cho, Yong-Ki;Lim, Kyung-Mook;Byun, Sang-Gyo;]

한국생산기술연구원 열.표면기술센터;경북열처리공업사;
Heat Treatment & Plating Technology Center, KITECH;KyungBuk Heat Treatment;

한국표면공학회지, Vol. 43, No. 5, pp. 211-216.

DOI : 10.5695/JKISE.2010.43.5.211

Formation and Chemical Dissolution Behaviors of Nano Porous Alumina
나노 기공성 알루미나의 생성과 화학적 용해 거동

오한준;정용수;지충수;
[Oh, Han-Jun;Jeong, Yong-Soo;Chi, Choong-Soo;]

한서대학교 신소재공학과;한국재료연구소 융합공정연구본부;국민대학교 신소재공학부;
Department of Materials Science, Hanseo University;Materials Processing Division, Korea Institute of Materials Science;School of Advanced Materials Engineering, Kookmin University;

한국표면공학회지, Vol. 43, No. 5, pp. 217-223.

DOI : 10.5695/JKISE.2010.43.5.217

Pulse Electrodeposition and Characterization of Ni-Si₃N₄ Composite Coatings

[Gyawali, Gobinda;Woo, Dong-Jin;Lee, Soo-Wohn;]

Department of Metallurgy and Materials Engineering, Sun Moon University;Korea Institute of Construction Materials;Department of Environmental Engineering, Sun Moon University;

한국표면공학회지, Vol. 43, No. 5, pp. 224-229.

DOI : 10.5695/JKISE.2010.43.5.224

Surface Modification of AC4A Aluminum Alloy Castings Using Friction Thermomechanical Process
마찰열기계적 공정을 이용한 AC4A 합금의 표면개질

윤태욱;고영봉;고병천;박경채;
[Yoon, Tae-Wook;Ko, Young-Bong;Ko, Byung-Chun;Park, Kyeung-Chae;]

평화오일씰공업(주);한국화학융합시험연구원;경북대학교 금속신소재공학과;
Pyung Hwa Oil-seal Industry Co., Ltd.;Korea Testing & Research Institute;Materials Science and Metallurgical Engineering of Kyungpook National University;

한국표면공학회지, Vol. 43, No. 5, pp. 230-237.

DOI : 10.5695/JKISE.2010.43.5.230

Syntheses and Mechanical Properties of Quaternary Cr-Si-O-N Coatings by Hybrid Coating System
하이브리드 코팅시스템에 의한 Cr-Si-O-N 코팅막 합성 및 기계적 성질

이정두;왕치민;김광호;
[Lee, Jeong-Doo;Wang, Qi Min;Kim, Kwang-Ho;]

부산대학교 재료공학과;부산대학교 하이브리드 소재 솔루션 국가핵심연구센터;
School of Materials Science and Engineering, Pusan National University;National Core Research Center for Hybrid Materials Solution, Busan National University;

한국표면공학회지, Vol. 43, No. 5, pp. 238-242.

DOI : 10.5695/JKISE.2010.43.5.238

Effect of Solution Compositions on Properties of Ni-Fe Nano Thin Film and Wire Made by Electrodeposition Method
Electrodeposition법으로 제조한 Ni-Fe 나노박막 및 나노선의 특성에 미치는 용액 조성의 영향

구본급;
[Koo, Bon-Keup;]

한밭대학교 신소재공학부;
Division of Advanced Materials Engineering, Hanbat National University;

한국표면공학회지, Vol. 43, No. 5, pp. 243-247.

DOI : 10.5695/JKISE.2010.43.5.243

Fabrication of Nano Metal Compounds Using Porous Aluminum Oxide Films
기공성 알루미나 산화 피막을 이용한 나노 금속화합물의 제조

오한준;정용수;지충수;
[Oh, Han-Jun;Jeong, Yong-Soo;Chi, Choong-Soo;]

한서대학교 신소재공학과;한국재료연구소 융합공정연구본부;국민대학교 신소재공학부;
Department of Materials Science, Hanseo University;Materials Processing Division, Korea Institute of Materials Science;School of Advanced Materials Engineering, Kookmin University;

한국표면공학회지, Vol. 43, No. 5, pp. 248-254.

DOI : 10.5695/JKISE.2010.43.5.248

Effects of the Electroplating Duration on the Mechanical Property of the Ni-Co-SiC Composite Coatings

[Kim, Sung-Min;Lee, Hong-Kee;]

Heat Treatment and Plating Faculty Center, Korea Institute of Industrial Technology;

한국표면공학회지, Vol. 43, No. 6, pp. 255-259.

DOI : 10.5695/JKISE.2010.43.6.255

Surface Characteristics of TiN and ZrN Film Coated STD 61 by Sputtering
스퍼터링법으로 TiN 및 ZrN 피막 코팅된 STD 61의 표면특성

은상원;최한철;
[Eun, Sang-Won;Choe, Han-Cheol;]

한국폴리텍V대학 신소재응용학과;조선대학교 치의학전문대학원 치과재료학교실 및 생체재료나노계면활성화센터;
Department of Applied Advanced Materials, Korea Polytechnic V College;Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, School of Dentistry, Chosun University;

한국표면공학회지, Vol. 43, No. 6, pp. 260-265.

DOI : 10.5695/JKISE.2010.43.6.260

Effect of Copper Content on the Microstructural Properties of Mo-Cu-N Films
Copper 함량에 따른 Mo-Cu-N 박막의 미세구조 변화에 대한 연구

신정호;최광수;왕계민;김광호;
[Shin, Jung-Ho;Choi, Kwang-Soo;Wang, Qi-Min;Kim, Kwang-Ho;]

부산대학교 재료공학부;부산대학교 하이브리드소재 솔루션 국가핵심연구센터;
School of Materials Science and Engineering, Pusan National University;National Core Research Center for Hybrid Materials Solution, Pusan National University;

한국표면공학회지, Vol. 43, No. 6, pp. 266-271.

DOI : 10.5695/JKISE.2010.43.6.266

Life Time Characteristics of OLED Device with AlO_x Passivation Film Deposited by RF Magnetron Sputtering
RF 마그네트론 스퍼터링으로 증착된 AlO_x 봉지 박막을 갖는 OLED 소자의 수명 특성

안오진;주성후;양재웅;
[An, O-Jin;Ju, Sung-Hoo;Yang, Jae-Woong;]

대진대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Daejin University;

한국표면공학회지, Vol. 43, No. 6, pp. 272-277.

DOI : 10.5695/JKISE.2010.43.6.272

A Study on the Friction and Wear Characteristic of TiAlN and CrAlN Coating on the SKD61 Extrusion Mold Steel for 6xxx Aluminum Alloy
6xxx계 알루미늄합금의 압출 금형용 SKD61 강재에 증착된 TiAlN, CrAlN 박막의 마찰.마모에 대한 연구

김민석;고진현;김상호;
[Kim, Min-Suck;Kho, Jin-Hyun;Kim, Sang-Ho;]

한국기술교육대학교 신소재공학과;
Dept. of Materials Engineering, Korea University of Technology and Education;

한국표면공학회지, Vol. 43, No. 6, pp. 278-282.

DOI : 10.5695/JKISE.2010.43.6.278

Mechanical and Tribological Properties of Pulse and Direct Current Electrodeposited Ni-TiO₂ Nano Composite Coatings

[Gyawali, Gobinda;Woo, Dong-Jin;Lee, Soo-Wohn;]

Department of Metallurgy and Materials Engineering, Sun Moon University;Korea Institute of Construction Materials;Department of Environmental Engineering, Sun Moon University;

한국표면공학회지, Vol. 43, No. 6, pp. 283-288.

DOI : 10.5695/JKISE.2010.43.6.283

Effect of Thiourea on the Copper Electrodeposition
구리 전기 도금에 Thiourea가 미치는 효과

이주열;임성봉;황양진;이규환;
[Lee, Joo-Yul;Yim, Seong-Bong;Hwang, Yang-Jin;Lee, Kyu-Hwan;]

한국기계연구원 부설 재료연구소 융합공정연구본부;
Materials Processing Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 43, No. 6, pp. 289-296.

DOI : 10.5695/JKISE.2010.43.6.289

Investigation of the Effect of Solution Acidity and Organic Additives on the Electrodeposition of Trivalent Chromium Ions
3가크롬 이온의 전착 반응에 용액 산도 및 유기물 첨가제가 미치는 영향 연구

이주열;;강대근;김만;권식철;
[Lee, Joo-Yul;Van Phuong, Nguyen;Kang, Dae-Keun;Kim, Man;Kwon, Sik-Chol;]

한국기계연구원 부설 재료연구소 융합공정연구본부;국립 창원대학교 화학과;
Materials Processing Division, Korea Institute of Materials Science;Anastro Laboratory, Department of Chemistry, Changwon National University;

한국표면공학회지, Vol. 43, No. 6, pp. 297-303.

DOI : 10.5695/JKISE.2010.43.6.297

Study of Temperature Uniformity Improvement of Inductive Heating in MOCVD Systems to Deposit White LED
백색 LED 증착용 MOCVD 장치에서 유도가열을 이용한 기판의 온도 균일도 향상에 관한 연구

홍광기;양원균;주정훈;이승호;이태완;
[Hong, Kwang-Ki;Yang, Won-Kyun;Joo, Jung-Hoon;Lee, Seung-Ho;Lee, Tae-Wan;]

군산대학교 공과대학 신소재공학과, 플라즈마 소재응용센터;주성 엔지니어링;
Department of Materials Science and Engineering, Plasma Materials Research Center, Kunsan National University;JUSUNG Engineering Co.;

한국표면공학회지, Vol. 43, No. 6, pp. 304-308.

DOI : 10.5695/JKISE.2010.43.6.304

A Study on the Heat Transfer Characteristics of the Large Dimension Heater Plate for a Semiconductor Process
반도체 표면처리공정용 대면적 히터 플레이트의 열전달 특성에 관한 연구

이윤용;강환국;문석환;
[Lee, Yun-Yong;Kang, Hwan-Kook;Moon, Seok-Hwan;]

대림대학 기계과;동은에이티에스;한국전자통신연구원;
Mechanical Engineering, Daelim College University;Dongeun A.T.S.;ETRI;

한국표면공학회지, Vol. 43, No. 6, pp. 309-314.

DOI : 10.5695/JKISE.2010.43.6.309