Depositing Rate of Electroless Nickel Plating Bath Contained Triethanolamine as a Complexing Agent
트리에탄올아민을 錯化劑로 사용한 無電解니켈鍍金浴의 析出速度에 관한 硏究
여운관;
Yeo, Woon-Kwan;
홍익공업전문대학 금속공학과;
Dept. of Metallurgical Engineering Hong Ik Technical College;
In the electroless nickel plating bath which contained nickel sulfate, sodium hypophosphite, boric acid and triethanolamine, effect of their concentration on the rate of deposition was tested by gravimetric method and polarization method. The polarization method that polarize small range of voltage anodicaly and cathodicaly at the mixed potential in the electroless plating bath can calculate mixed current (depositing rate) from $i_{mp}=frac {i}{eta};frac{RT}{nF};or;i_{mp}=frac{i}{eta};frac{1}{2.3}(frac{b_a;;b_c}{b_c+b_a})$ Where $i_{mp}$ is the depositing current, i is the polarized current, ${eta}$ is the polarized voltage, $b_a;and;b_c$ are the Tafel slop of anodic and cathodic polarization curves respectively. The calculated mixed current ($i_{mp}$) is proportional to the depositing rate obtained by gravimetric method and corresponded mostly to the real depositing rate by multifying supplementary constant. The polarization method can be used for founding inclination of reaction on various concentration of each composition. Decreasing or increasing concentration of triethanolaminc as a complexing agent , the depositing rate is decreased and when the bath contained 25-50mL/L of triethanoloamine, the depositing rate is increased. The depositing rate is increased with increasing the concentration of boric acid, and when the bath contained 0.5M of boric acid, the depositing rate is increased abruptly. The optimum composition of the electroless nickel bath was estimated 0.1M of nickel sulfate, 0.25M of sodium hypophosphite, 0.5M of boric acid, and 25-50mL/L of triethanalamine.