Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

Study of PEO Process for Al 7075 and Effect of additives
알루미늄 7075 합금의 PEO 처리 기술 및 첨가제 영향 분석

진연호;양재교;
[Jin, Yun-Ho;Yang, Jae-Kyo;]

고등기술연구원 신소재공정센터;
Advanced Materials & Processing Center, Institute for Advanced Engineering (IAE);

한국표면공학회지, Vol. 53, No. 2, pp. 53-58.

DOI : 10.5695/JKISE.2020.53.2.53

Formation Behavior and Properties of PEO Films on AZ91 Mg Alloy in 0.1 M NaOH + 0.05 M NaF Solution Containing Various Na2SiO3 Concentrations
AZ91 마그네슘 합금의 플라즈마 전해산화 피막 형성 및 물성에 미치는 0.1 M NaOH + 0.05 M NaF 용액 중 Na2SiO3 농도의 영향

권두영;송풍근;문성모;
[Kwon, Duyoung;Song, Pung-Keun;Moon, Sungmo;]

재료연구소 표면기술연구본부 전기화학 연구실;부산대학교 재료공학부;
Surface Technology Division, Korea Institute of Materials Science;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 53, No. 2, pp. 59-66.

DOI : 10.5695/JKISE.2020.53.2.59

Microstrcture and Mechanical Properties of HfN Films Deposited by dc and Inductively Coupled Plasma Assisted Magnetron Sputtering
직류 및 유도결합 플라즈마 마그네트론 스퍼터링법으로 제조된 HfN 코팅막의 미세구조 및 기계적 물성연구

장훈;전성용;
[Jang, Hoon;Chun, Sung-Yong;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 53, No. 2, pp. 67-71.

DOI : 10.5695/JKISE.2020.53.2.67

Study of High Temperature Corrosion Behavior of Fe-Cr Steel in Sewage Sludge-(SO2-O2-H2O-bal. CO2) mixed Gas Environment
하수슬러지-(SO2-O2-H2O-bal. CO2) 혼합 가스 분위기에서 Fe-Cr 강의 고온부식거동 연구

김민정;박주창;유인선;
[Kim, Min Jung;Park, Joo Chang;Ryu, In Sun;]

성균관대학교 신소재공학과;아주대학교 에너지시스템학과;한국폴리텍대학 신소재응용과;
School of Advanced Materials Science and Engineering, Sungkyunkwan University;Department of Energy Systems Research, Ajou University;3 Department of Advanced Material, Korea polytechnic;

한국표면공학회지, Vol. 53, No. 2, pp. 72-79.

DOI : 10.5695/JKISE.2020.53.2.72

Surface Hardness Measurement of Anodic Oxide Films on AA2024 based an Ink-Impregnation Method

[Moon, Sungmo;Rha, Jong-joo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 53, No. 2, pp. 80-86.

DOI : 10.5695/JKISE.2020.53.2.80