저널

Formation of Cerium Conversion Coatings on AZ31 Magnesium Alloy

[Fazal, Basit Raza;Moon, Sungmo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 1, pp. 1-13.

DOI : 10.5695/JKISE.2016.49.1.1

High-temperature Corrosion by Chlorides in Biomass-fired Plants
바이오매스 발전시 염소가스에 의한 고온부식

이동복;
[Lee, Dong Bok;]

성균관대학교 신소재공학부;
School of Advanced Materials Science & Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 49, No. 1, pp. 14-19.

DOI : 10.5695/JKISE.2016.49.1.14

Femtosecond Laser Ablation of Polymer Thin Films for Nanometer Precision Surface Patterning

[Jun, Indong;Lee, Jee-Wook;Ok, Myoung-Ryul;Kim, Yu-Chan;Jeon, Hojeong;]

Center for Biomaterials, Biomedical Research Institute, Korea Institute of Science and Technology;School of Advanced Materials Engineering, Kookmin University;

한국표면공학회지, Vol. 49, No. 1, pp. 20-25.

DOI : 10.5695/JKISE.2016.49.1.20

Electrochemical Characteristics under Cavitation-Erosion Environment of STS 304 and Hot-Dip Aluminized STS 304 in Sea Water Solution
천연해수 용액에서 STS 304와 용융 알루미늄 도금된 STS 304의 캐비테이션-침식 환경 하에서의 전기화학적 특성

정상옥;김성종;
[Chong, Sang-Ok;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 49, No. 1, pp. 26-31.

DOI : 10.5695/JKISE.2016.49.1.26

Cavitation Damage Characteristics of Al and Zn Arc Thermal Spray Coating Layers for Hull Structural Steel
선체 구조용 강재에 대한 Al과 Zn 아크용사코팅 층의 캐비테이션 손상 특성

박일초;김성종;
[Park, Il-Cho;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 1, pp. 32-39.

DOI : 10.5695/JKISE.2016.49.1.32

Study on Thermoelectric Properties of Cu Doping of Pulse-Electrodeposited n-type Bi₂(Te-Se)₃ Thin Films
펄스 전기도금법에 의해 제조된 n형 Bi₂(Te-Se)₃ 박막의 Cu 도핑에 따른 열전특성에 관한 연구

허나리;김광호;임재홍;
[Heo, Na-Ri;Kim, Kwang-Ho;Lim, Jae-Hong;]

부산대학교, 재료공학부;한국재료연구소, 표면기술본부;
Pusan National University, Department of Materials Science and Engineering;Korea Institute of Materials Science(KIMS), Surface Technology Division;

한국표면공학회지, Vol. 49, No. 1, pp. 40-45.

DOI : 10.5695/JKISE.2016.49.1.40

Effects of NaOH Concentration on the Structure of PEO Films Formed on AZ31 Mg Alloy in PO₄^3- and SiO₃^2- Containing Aqueous Solution
인산 및 규산 이온이 포함된 수용액에서 AZ31 마그네슘 합금의 플라즈마 전해산화 피막의 구조에 미치는 수산화나트륨 농도의 영향

권두영;문성모;
[Kwon, Duyoung;Moon, Sungmo;]

한국기계연구원 부설 재료연구소;
Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 1, pp. 46-53.

DOI : 10.5695/JKISE.2016.49.1.46

Formation of Ni-W-P/Cu Electrodes for Silicon Solar Cells by Electroless Deposition
무전해 도금을 이용한 Si 태양전지 Ni-W-P/Cu 전극 형성

김은주;김광호;이덕행;정운석;임재홍;
[Kim, Eun Ju;Kim, Kwang-Ho;Lee, Duk Haeng;Jung, Woon Suk;Lim, Jae-Hong;]

재료연구소 전기화학연구실;부산대학교 재료공학과;호진플라텍;
Electrochemistry Department, Surface Technology Division, Korea Institute of Materials Science;Department of Materials Science and Engineering, Pusan National University;Hojin Platech Co.,Ltd.;

한국표면공학회지, Vol. 49, No. 1, pp. 54-61.

DOI : 10.5695/JKISE.2016.49.1.54

Characteristics of Conversion Coating of AZ31 Magnesium Alloy Formed in Chromium-Free Cerium-Based Solution
크롬 프리 세륨 용액에 의한 AZ31 마그네슘 합금의 화성 피막에 대한 특성 평가

김명환;이동욱;곽삼탁;문명준;
[Kim, Myung Hwan;Lee, Dong Uk;Kwag, Sam-Tag;Moon, Myung-Jun;]

한국생산기술연구원;부경대학교 공업화학과;
Korea Institute of Industrial Technology(KITECH);Department of Industrial Chemistry, Pukyong National University;

한국표면공학회지, Vol. 49, No. 1, pp. 62-68.

DOI : 10.5695/JKISE.2016.49.1.62

Improved Ethanol Gas Sensing Performance of α-Fe₂O₃ Nanoparticles by the Addition of NiO Nanoparticles
NiO의 첨가에 따른 α-Fe₂O₃ 나노입자 센서의 에탄올 가스 검출 특성 향상

박성훈;강우승;
[Park, Sunghoon;Kang, Wooseung;]

인하대학교 신소재공학과;인하공업전문대학 금속재료과;
Department of Materials Science & Engineering, Inha University;Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 49, No. 1, pp. 69-74.

DOI : 10.5695/JKISE.2016.49.1.69

Ethanol Gas Sensing Properties of In₂O₃ Nanowires Coated with Co₃O₄ Nanoparticles
Co₃O₄ 나노입자가 코팅된 In₂O₃ 나노와이어의 에탄올 가스 검출 특성

박성훈;강우승;
[Park, Sunghoon;Kang, Wooseung;]

인하대학교 신소재공학과;인하공업전문대학 금속재료과;
Department of Materials Science & Engineering, Inha University;Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 49, No. 1, pp. 75-80.

DOI : 10.5695/JKISE.2016.49.1.75

Effect of Deposition Temperature on the Properties of Eu³⁺-doped MgMoO₄ Phosphor Thin Films
증착 온도가 Eu³⁺ 이온이 도핑된 MgMoO₄ 형광체 박막의 특성에 미치는 영향

강동균;조신호;
[Kang, Dongkyun;Cho, Shinho;]

신라대학교 신소재공학과, 녹색융합기술센터;
Department of Materials Science and Engineering, Center for Green Fusion Technology;

한국표면공학회지, Vol. 49, No. 1, pp. 81-86.

DOI : 10.5695/JKISE.2016.49.1.81

Development of AgNW/Reduced Graphene Oxide Hybrid Transparent Electrode with Long-Term Stability Using Plasma Reduction
플라즈마 환원 기술을 응용한 장수명의 은나노와이어/Reduced Graphene Oxide 하이브리드 투명전극 개발

정성훈;안원민;김도근;
[Jung, Sunghoon;Ahn, Wonmin;Kim, Do-Geun;]

재료연구소 표면기술연구본부 플라즈마공정 연구실;
Plasma Processing Technology Department, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 1, pp. 87-91.

DOI : 10.5695/JKISE.2016.49.1.87

Study on Electron Temperature Diagnostic and the ITO Thin Film Characteristics of the Plasma Emission Intensity by the Oxygen Gas Flow
산소 유량별 플라즈마 방출광원 세기에 따른 전자온도 진단과 산화주석박막 특성연구

박혜진;최진우;조태훈;윤명수;권기청;
[Park, Hye Jin;Choi, Jin-Woo;Jo, Tae Hoon;Yun, Myoung Soo;Kwon, Gi-Chung;]

광운대학교 전자바이오물리학과;
Department of Electrical and Biological Physics, Kwangwoon University;

한국표면공학회지, Vol. 49, No. 1, pp. 92-97.

DOI : 10.5695/JKISE.2016.49.1.92

Study of Dry Etching of SnO thin films using a Inductively Coupled Plasma
Inductively Coupled Plasma를 이용한 SnO 박막의 식각 특성 연구

김수곤;박병옥;이준형;김정주;허영우;
[Kim, Su-Kon;Park, Byung-Ok;Lee, Joon-Hyung;Kim, Jeong-Joo;Heo, Young-Woo;]

나노융합기술원;경북대학교 신소재공학부;
National Institute for Nanomaterials Technology;School of Materials Science and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 49, No. 1, pp. 98-103.

DOI : 10.5695/JKISE.2016.49.1.98

Diffusion of Si Vapor Infiltrating into Porous Graphite
다공성 흑연의 기공내부로 침투하는 Si 증발입자의 확산

박장식;황정태;
[Park, Jang-Sick;Hwang, Jungtae;]

한국과학기술정보연구원 리시트 프로그램;제너코트;
ReSEAT Program, KISTI;Genecoat;

한국표면공학회지, Vol. 49, No. 1, pp. 104-109.

DOI : 10.5695/JKISE.2016.49.1.104

Non-destructive Analysis of Nano-sized Crack Morphology of Electro-deposit by Using Small Angle Neutron Scattering
소각중성자 산란법을 이용한 도금층의 극미세 균열 형상의 비파괴적 분석

최용;신은주;한영수;성백석;
[Choi, Yong;Shin, Eun Joo;Hahn, Young Soo;Seung, Baik Seok;]

단국대학교 신소재공학과;한국원자력연구원 하나로팀;
Department of Materials Science and Engineering, Dankook University;HANARO, Korea Atomic Energy Research Institute;

한국표면공학회지, Vol. 49, No. 2, pp. 111-118.

DOI : 10.5695/JKISE.2016.49.2.111

Characterization of Ceramic Oxide Layer Produced on Commercial Al Alloy by Plasma Electrolytic Oxidation in Various KOH Concentrations

[Lee, Jung-Hyung;Kim, Seong-Jong;]

Korea Testing & Research Institute(KTR);Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 2, pp. 119-124.

DOI : 10.5695/JKISE.2016.49.2.119

Effect of Current Density on Porous Film Formation in Two-Step Anodizing for Al Alloy

[Lee, Seung-Jun;Kim, Seong-Jong;]

Department of Power System Engineering, Kunsan National University;Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 2, pp. 125-129.

DOI : 10.5695/JKISE.2016.49.2.125

Effects of Metal Anion Complexes in Electrolyte on the Properties of Anodic Oxide Films on ADC12 Al Alloy

[Yoo, Hyeonseok;Lee, Chulho;Oh, Kiseok;Choi, Jinsub;]

Department of Chemistry and Chemical Engineering Center for Molecular Catalysts and Applications (BK21 plus program) Inha University;

한국표면공학회지, Vol. 49, No. 2, pp. 130-134.

DOI : 10.5695/JKISE.2016.49.2.130

Effect of the Mg Ion Containing Oxide Films on the Biocompatibility of Plasma Electrolytic Oxidized Ti-6Al-4V

[Lee, Kang;Choe, Han-Cheol;]

Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials & Research Center for Oral Disease Regulation of the Aged, School of Dentistry, Chosun University;

한국표면공학회지, Vol. 49, No. 2, pp. 135-140.

DOI : 10.5695/JKISE.2016.49.2.135

Deposition and Characterization of Electrophoretic Paint on AZ31 Magnesium Alloy

[Nguyen, Van Phuong;Moon, Sungmo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 2, pp. 141-146.

DOI : 10.5695/JKISE.2016.49.2.141

Corrosion of Fe-9%Cr-1%Mo Steel at 600 and 700℃ in N₂/(0.5, 2.5)%H₂S-mixed Gas

[Lee, Dong Bok;Abro, Muhammad Ali;Yadav, Poonam;Bak, Sang Hwan;Shi, Yuke;Kim, Min Jung;]

School of Advanced Materials Science and Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 49, No. 2, pp. 147-151.

DOI : 10.5695/JKISE.2016.49.2.147

Effects of Plasma Treatment on Contact Resistance and Sheet Resistance of Graphene FET

[Ra, Chang-Ho;Choi, Min Sup;Lee, Daeyeong;Yoo, Won Jong;]

SKKU Advanced Institute of Nano-Technology (SAINT), Samsung-SKKU Graphene Center (SSGC), Sungkyunkwan University;

한국표면공학회지, Vol. 49, No. 2, pp. 152-158.

DOI : 10.5695/JKISE.2016.49.2.152

Optimization of Operating Parameters and Components for Water Electrolysis Using Anion Exchange Membrane
음이온 교환막 알칼리 수전해를 위한 운전 조건 및 구성요소의 최적화

장명제;원미소;이규환;최승목;
[Jang, Myeong Je;Won, Mi So;Lee, Kyu Hwan;Choi, Sung Mook;]

한국기계연구원 부설 재료연구소 표면기술연구본부;
Surface Technology Department, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 2, pp. 159-165.

DOI : 10.5695/JKISE.2016.49.2.159

The Characteristic Analysis of Calcareous Deposit Films Formed on Steel Plate by Cathodic Current Process in Marine Environment
해양환경 중 음극전류 프로세스에 의해 강판에 형성된 석회질 피막의 특성 분석

박준무;강재욱;최인혜;이승효;문경만;이명훈;
[Park, Jun-Mu;Kang, Jae Wook;Choi, In-Hye;Lee, Seung-Hyo;Moon, Kyung-Man;Lee, Myeong-Hoon;]

한국해양대학교 해사대학 기관공학부;한국해양대학교 공과대학 조선기자재공학과;
Division of Marine Engineering, Korea Maritime and Ocean University;Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 2, pp. 166-171.

DOI : 10.5695/JKISE.2016.49.2.166

Electrochemical Characteristics of Arc Thermal Sprayed Inconel 625 Coating on SS400 Steel in Seawater
Inconel 625로 아크 용사코팅된 SS400강의 해수 내 전기화학적 특성

박일초;김성종;
[Park, Il-Cho;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 2, pp. 172-177.

DOI : 10.5695/JKISE.2016.49.2.172

Fabrication and Characterization of Film Type Light Guide Plates by UV Imprint Lithography
UV 임프린팅법에 의한 필름형 광도광판의 제조 및 특성 연구

김형관;김소원;이희철;
[Kim, Hyeong-Gwan;Kim, So-Won;Lee, Hee-Chul;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 49, No. 2, pp. 178-185.

DOI : 10.5695/JKISE.2016.49.2.178

Transparent Photovoltaic Device using Two-dimensional Transition-metal Dichalcogenides
이차원 반도체 소재를 이용한 투명 태양전지 특성에 관한 연구

좌태헌;현철민;김민식;이혁주;안지훈;
[Jwa, Tae-Hun;Hyun, Chul-Min;Kim, Min-Sik;Lee, Hyeok-ju;Ahn, Ji-Hoon;]

한국해양대학교 전자소재공학과;
Department of Electronic Material Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 2, pp. 186-190.

DOI : 10.5695/JKISE.2016.49.2.186

Improved Properties of Li₄Ti₅O₂ (LTO) by Surface Modification with Carbon Nanotube (CNT)
CNT 첨가를 통해 표면 처리한 LTO의 특성향상에 관한 연구

박수길;김청;;
[Park, Soo-Gil;Kim, Cheong;Habazaki, Hiroki;]

충북대학교 공업화학과;북해도대학교;
Department of Engineering Chemistry, Chungbuk National University;Faculty of Engineering, Hokkaido university;

한국표면공학회지, Vol. 49, No. 2, pp. 191-195.

DOI : 10.5695/JKISE.2016.49.2.191

Emission Characteristics of White Tandem Organic Light Emitting Diodes Using Blue and Red Phosphorescent Materials
청색과 적색 인광 물질을 사용한 백색 적층 OLED의 발광 특성

박찬석;주성후;
[Park, Chan-Suk;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 49, No. 2, pp. 196-201.

DOI : 10.5695/JKISE.2016.49.2.196

Influence of Heat Treatment and Magnesium Content on Corrosion Resistance of Al-Mg Coated Steel Sheet
PVD법에 의해 제작한 Al-Mg 코팅 강판의 내식성에 미치는 Mg 함량 및 열처리의 영향

강재욱;박준무;황성화;이승효;문경만;이명훈;
[Kang, Jae Wook;Park, Jun-Mu;Hwang, Sung-Hwa;Lee, Seung-Hyo;Moon, Kyung-Man;Lee, Myeong-Hoon;]

한국해양대학교 해사대학 기관공학부;한국해양대학교 공과대학 조선기자재 공학과;
Div. of Marine Engineering, Korea Maritime and Ocean University;Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 2, pp. 202-210.

DOI : 10.5695/JKISE.2016.49.2.202

Formation of Multi-Component Boride Coatings Containing V and/or Cr and Evaluation of Their Properties
바나듐 및 크롬을 포함하는 다 성분 Boride 코팅의 생성 및 특성 평가

이의열;윤상혁;김종하;
[Lee, Euiyeol;Yoon, Sanghyun;Kim, Jongha;]

안동대학교 신소재공학부 금속재료공학과;
Department of Materials Science and Engineering, Andong National University;

한국표면공학회지, Vol. 49, No. 2, pp. 211-217.

DOI : 10.5695/JKISE.2016.49.2.211

Characteristics of Thermal Radiation Pastes Containing Graphite and Carbon Nanotube
흑연 및 탄소나노튜브 혼합 방열도료의 특성

이지훈;송만호;강찬형;
[Lee, Ji Hun;Song, Man-Ho;Kang, Chan Hyoung;]

한국산업기술대학교 신소재공학과;(주)하나나노텍 기술연구소;
Department of Advanced Materials Engineering, Korea Polytechnic University;Technical Research Institute, Hana Nano Tech;

한국표면공학회지, Vol. 49, No. 2, pp. 218-224.

DOI : 10.5695/JKISE.2016.49.2.218

Anodic Oxide Films Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Method in Electrolytes Containing Various NaF Concentrations

[Moon, Sungmo;Kwon, Duyoung;]

Surface Technology Division, Korea Institute of Materials Science;Dongjin Metal;

한국표면공학회지, Vol. 49, No. 3, pp. 225-230.

DOI : 10.5695/JKISE.2016.49.3.225

Acid Pickling/polishing of AZ31 Magnesium Alloy

[Fazal, Basit Raza;Moon, Sungmo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 3, pp. 231-237.

DOI : 10.5695/JKISE.2016.49.3.231

Electrodeposition of Copper on AZ91 Mg Alloy in Cyanide Solution

[Nguyen, Van Phuong;Park, Min-Sik;Yim, Chang Dong;You, Bong Sun;Moon, Sungmo;]

Korea Institute of Materials Science;KMW Inc.;

한국표면공학회지, Vol. 49, No. 3, pp. 238-244.

DOI : 10.5695/JKISE.2016.49.3.238

Evaluation on the Corrosion Resistance of Three Types of Galvanizing Steels in 1% H₂SO₄ Solution

[Moon, Kyung-Man;Lee, Sung-Yul;Lee, Myeong-Hoon;Jeong, Jae-Hyun;Baek, Tae-Sil;]

Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University;Dept. of Marine System Engineering, Korea Maritime and Ocean University;Dept. of Mechanical & Energy Systems Engineering, Korea Maritime and Ocean University;Dept. of Steel Industry, Pohang College;

한국표면공학회지, Vol. 49, No. 3, pp. 245-251.

DOI : 10.5695/JKISE.2016.49.3.245

Adhesion Change of AZO/PET Film by ZrCu Insertion Layer

[Ko, Sang-Won;Jung, Jong-Gook;Park, Kyeong-Soon;Lim, Sil-Mook;]

Department of Advanced Materials Engineering, Korea Polytechnic University;Division of electronic Materials, Hanwha Advanced Materials;Nanotechnology and Advanced Materials Engineering, Sejong University;

한국표면공학회지, Vol. 49, No. 3, pp. 252-259.

DOI : 10.5695/JKISE.2016.49.3.252

Fractured Surface Morphology and Mechanical Properties of Ni-Cr Based Alloys with Mo Content for Dental Applications

[Kim, Hyun-Soo;Son, Mee-Kyoung;Choe, Han-Cheol;]

College of Dentistry, Chosun University;Department of Prosthodontics, College of Dentistry, Chosun University;Department of Dental Materials, Research Center of Nano-Interface Activation for Biomaterials, Chosun University;

한국표면공학회지, Vol. 49, No. 3, pp. 260-264.

DOI : 10.5695/JKISE.2016.49.3.260

Effects of Acid Treatment of Carbon on Electroless Copper Plating
피도금 탄소재의 산처리가 무전해 동도금에 미치는 영향

신아리;한준현;
[Shin, Ari;Han, Jun Hyun;]

충남대학교 신소재공학과;
Department of Materials Science & Engineering, Chungnam National University;

한국표면공학회지, Vol. 49, No. 3, pp. 265-273.

DOI : 10.5695/JKISE.2016.49.3.265

Cavitation-erosion Resistance of Stabilized Stainless Steel with Niobium Addition in Sea Water Environment
해수 내 캐비테이션-침식 저항성에 미치는 스테인리스강의 Nb 첨가의 영향

최용원;한민수;김성종;
[Choi, Yong-Won;Han, Min-Su;Kim, Seong-Jong;]

김포해양경비안전센터;목포해양대학교 기관시스템공학부;
Gimpo maritime policebox;Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 3, pp. 274-279.

DOI : 10.5695/JKISE.2016.49.3.274

Influences of Potassium Fluoride (KF) Addition on the Surface Characteristics in Plasma Electrolytic Oxidation of Marine Grade Al Alloy
해양환경용 알루미늄 합금의 플라즈마 전해 산화 시 표면 특성에 관한 불화칼륨(KF)의 영향

이정형;김성종;
[Lee, Jung-Hyung;Kim, Seong-Jong;]

한국화학융합시험연구원;목포해양대학교 기관시스템공학부;
Korea Testing & Research Institute (KTR);Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 3, pp. 280-285.

DOI : 10.5695/JKISE.2016.49.3.280

Effect of Surface Modification of the Porous Stainless Steel Support on Hydrogen Perm-selectivity of the Pd-Ag Alloy Hydrogen Separation Membranes
다공성 스테인리스 강 지지체의 표면개질에 따른 팔라듐-은 합금 수소 분리막의 수소 투과 선택도의 변화

김낙천;김세홍;이진범;김현희;양지혜;김동원;
[Kim, Nak-Cheon;Kim, Se-Hong;Lee, Jin-Beum;Kim, Hyun-Hee;Yang, Ji-Hye;Kim, Dong-Won;]

경기대학교 신소재공학과;
Department of Advanced Materials Engineering, Kyonggi University;

한국표면공학회지, Vol. 49, No. 3, pp. 286-300.

DOI : 10.5695/JKISE.2016.49.3.286

Nanotexturing and Post-Etching for Diamond Wire Sawn Multicrystalline Silicon Solar Cell
다이아몬드 와이어에 의해 절단된 다결정 실리콘 태양전지의 나노텍스쳐링 및 후속 식각 연구

김명현;송재원;남윤호;김동형;유시영;문환균;유봉영;이정호;
[Kim, Myeong-Hyun;Song, Jae-Won;Nam, Yoon-Ho;Kim, Dong-Hyung;Yu, Si-Young;Moon, Hwan-Gyun;Yoo, Bong-Young;Lee, Jung-Ho;]

한양대학교 재료화학공학과;일진다이아몬드;
Department of Materials and Chemical Engineering, Hanyang University;Iljin Diamond Co., Ltd.;

한국표면공학회지, Vol. 49, No. 3, pp. 301-306.

DOI : 10.5695/JKISE.2016.49.3.301

Properties of AlTiN Films Deposited by Cathodic Arc Deposition
음극 아크 증착으로 제조된 AlTiN 박막의 특성

양지훈;김성환;송민아;정재훈;정재인;
[Yang, Ji-Hoon;Kim, Sung-Hwan;Song, Min-A;Jung, Jae-Hun;Jeong, Jae-In;]

포항산업과학연구원 소재이용연구그룹;
Materials Solution Research Group, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 49, No. 3, pp. 307-315.

DOI : 10.5695/JKISE.2016.49.3.307

Emission Characteristics of Dual Emission Tandem OLED with Charge Generation Layer MoO_x and Cathode Al Thickness
전하생성층 MoO_x와 음극 Al의 두께에 따른 양면발광 적층 OLED의 발광 특성

김지현;주성후;
[Kim, Ji-Hyun;Ju, Sung-Hoo;]

대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;

한국표면공학회지, Vol. 49, No. 3, pp. 316-321.

DOI : 10.5695/JKISE.2016.49.3.316

Nanocarbon/silver Nanowire Hybrid Flexible Transparent Conducting Film Technology
탄소나노튜브와 은나노와이어 복합 유연투명전극 필름 기술

한중탁;
[Han, Joong Tark;]

한국전기연구원 나노융합기술연구센터;
Nano Hybrid Technology Research Center, Korea Electrotechnology Research Institute;

한국표면공학회지, Vol. 49, No. 4, pp. 323-330.

DOI : 10.5695/JKISE.2016.49.4.323

Anodic Oxidation Behavior of AZ31 Magnesium Alloy in Aqueous Electrolyte Containing Various Na₂CO₃ Concentrations

[Moon, Sungmo;Kim, Yeajin;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 4, pp. 331-338.

DOI : 10.5695/JKISE.2016.49.4.331

Corrosion of Fe-2.25%Cr-1.6%W Steel at 600 and 700℃ in N₂/(0.5, 2.5)%H₂S-mixed Gas

[Lee, Dong Bok;Bak, Sang Hwan;]

School of Advanced Materials Science and Engineering, Sungkyunkwan University;

한국표면공학회지, Vol. 49, No. 4, pp. 339-343.

DOI : 10.5695/JKISE.2016.49.4.339

Cavitation-Erosion Characteristics of the Stainless Steel with Adding Ti Stabilizer Element in Sea Water
안정화 원소 Ti 첨가에 따른 스테인리스강의 해수 내 캐비테이션-침식 특성

최용원;양예진;김성종;
[Choi, Yong-Won;Yang, Ye-Jin;Kim, Seong-Jong;]

김포해양경비안전센터;목포해양대학교 기관시스템공학부;
Gimpo maritime policebox;Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 4, pp. 344-348.

DOI : 10.5695/JKISE.2016.49.4.344

Electrochemical Damage Characteristics of Anodized 5083 Aluminum Alloy with Flow Rate in Seawater
양극산화 처리된 5083 알루미늄 합금의 해수 내 유속변화에 따른 전기화학적 손상 특성

박일초;김성종;
[Park, Il-Cho;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 49, No. 4, pp. 349-356.

DOI : 10.5695/JKISE.2016.49.4.349

The Study of Manufacturing the AAO Template and Fabrication of Carbon and Metal Oxide Nanofibers using AAO Template
AAO (Anodized Aluminium Oxide) template 제조 및 이를 이용해 제조한 탄소 및 산화 금속 나노 섬유 물질에 관한 연구

김청;박수길;
[Kim, Cheong;Park, Soo-Gil;]

충북대학교 공업화학과;
Department of Engineering Chemistry, Chungbuk National University;

한국표면공학회지, Vol. 49, No. 4, pp. 357-362.

DOI : 10.5695/JKISE.2016.49.4.357

Electropolishing Characteristics of Stainless Steel for Industrial Application
산업현장 적용을 위한 스테인레스 스틸의 전해연마 특성

김수한;이승헌;조재훈;김상범;최중소;박철환;
[Kim, Soo Han;Lee, Seung Heon;Cho, Jaehoon;Kim, Sang Bum;Choi, Joongso;Park, Chulhwan;]

광운대학교 화학공학과;한국생산기술연구원 그린공정소재그룹;
Department of Chemical Engineering, Kwangwoon University;Green Process and Materials R&D Group, Korea Institute of Industrial Technology (KITECH);

한국표면공학회지, Vol. 49, No. 4, pp. 363-367.

DOI : 10.5695/JKISE.2016.49.4.363

MoN-Cu Thin Films Deposited by Magnetron Sputtering with Single Alloying Target
단일 합금타겟을 이용한 마크네트론 스퍼터링 공정으로 증착된 MoN-Cu 박막

이한찬;문경일;신백균;
[Lee, Han-Chan;Moon, Kyoung-Il;Shin, Paik-Kyun;]

인하대학교 전기공학과;한국생산기술연구원 열처리그룹;
Department of Electrical Engineering, Inha University;Korea Institute of Industrial Technology, Heat Treatment R&BD Group;

한국표면공학회지, Vol. 49, No. 4, pp. 368-375.

DOI : 10.5695/JKISE.2016.49.4.368

Effect of Inductively Coupled Plasma on the Microstructure, Structure and Mechanical Properties of VN Coatings
유도결합 플라즈마 파워가 VN 코팅막의 미세구조, 결정구조 및 기계적 특성에 미치는 영향에 관한 연구

전성용;이소연;
[Chun, Sung Yong;Lee, So Yeon;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering Mokpo National University;

한국표면공학회지, Vol. 49, No. 4, pp. 376-381.

DOI : 10.5695/JKISE.2016.49.4.376

Ethanol Gas Sensing Properties of NiO-based Composite Oxide Semiconductor with Co₃O₄ Nanoparticles
산화코발트 나노입자의 첨가에 따른 산화니켈 기반 반도체 산화물의 에탄올 가스 검출 특성 향상

강우승;
[Kang, Wooseung;]

인하공업전문대학 금속재료과;
Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 49, No. 4, pp. 382-388.

DOI : 10.5695/JKISE.2016.49.4.382

Hydrogen Effect on the Oxidation of Zr-Alloy Claddings under High Temperature
수소화물에 의한 Zr 합금의 고온산화 가속효과

정윤목;하성우;박광헌;
[Jung, Yunmock;Ha, Sungwoo;Park, Kwangheon;]

한국원자력연구원;경희대학교 원자력공학과;
Korea Atomic Energy Research Institute;Department of Nuclear Engineering, Kyunghee University;

한국표면공학회지, Vol. 49, No. 4, pp. 389-394.

DOI : 10.5695/JKISE.2016.49.4.389

Effect of Fluoride Conversion Coating on the Corrosion Resistance and Adhesion of E-painted AZ31 Magnesium Alloy

[Fazal, Basit Raza;Moon, Sungmo;]

Surface Technology Division, Korea Institute of Materials Science;

한국표면공학회지, Vol. 49, No. 5, pp. 395-400.

DOI : 10.5695/JKISE.2016.49.5.395

Effect of Zincate Treatment of As-Cast AZ91 Mg Alloy on Electrodeposition of Copper in a Copper Pyrophosphate Bath

[Nguyen, Van Phuong;Park, Min-Sik;Yim, Chang Dong;You, Bong Sun;Moon, Sungmo;]

Korea Institute of Materials Science;KMW Inc.;

한국표면공학회지, Vol. 49, No. 5, pp. 401-407.

DOI : 10.5695/JKISE.2016.49.5.401

Design Requirements Review and Time-dependant CP Performance Analysis for Corrosion Protection Design Optimization of Offshore Structure
해상구조물의 방식설계 최적화를 위한 설계요건 분석 및 시간의존적 방식성능 해석

박재철;최유열;편강일;천강우;장화섭;노길태;
[Park, Jae-Cheul;Choi, Yoo-Youl;Pyeon, Kang-Il;Chun, Kang-Woo;Jang, Hwa-Sup;Roh, Gill-Tae;]

(사)한국선급;
Korean Register;

한국표면공학회지, Vol. 49, No. 5, pp. 408-415.

DOI : 10.5695/JKISE.2016.49.5.408

Effect of Electrolyte Type on Shape and Surface Area Characteristics of Dendritic Cu Powder
도금전해액의 종류에 따른 수지상 구리 분말의 형상 및 표면적 특성

박다정;박채민;강남현;이규환;
[Park, Da Jung;Park, Chae-Min;Kang, Nam Hyun;Lee, Kyu Hwan;]

재료연구소 전기화학연구실;동아대학교 신소재공학과;부산대학교 재료공학과;
Surface Technology Division, Korea Institute of Materials Science (KIMS);Department of Materials Science and Engineering, Dong-A University;Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 49, No. 5, pp. 416-422.

DOI : 10.5695/JKISE.2016.49.5.416

Effect of Applied Current Density on the Corrosion Damage of Steel with Accelerated Electrochemical Test
전기화학적 가속 부식 평가법에서 강재의 부식 손상에 미치는 인가전류밀도의 영향

이정형;박일초;박재철;김성종;
[Lee, Jung-Hyung;Park, Il-Cho;Park, Jae-Cheul;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;(사)한국선급;
Division of Marine Engineering, Mokpo National Maritime University;Korean Register;

한국표면공학회지, Vol. 49, No. 5, pp. 423-430.

DOI : 10.5695/JKISE.2016.49.5.423

Influence of Current Density Application Time on the Corrosion Damage of Offshore Wind Steel Substructure in Galvanostatic Corrosion Experiment
해상풍력 하부 구조물용 강재의 정전류 부식 시험 시 전류밀도 인가 시간이 부식손상에 미치는 영향

이정형;박재철;한민수;장석기;김성종;
[Lee, Jung-Hyung;Park, Jae-Cheul;Han, Min-Su;Jang, Seok-Ki;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;(사)한국선급;
Division of Marine Engineering, Mokpo National Maritime University;Korean Register;

한국표면공학회지, Vol. 49, No. 5, pp. 431-438.

DOI : 10.5695/JKISE.2016.49.5.431

Failure Analysis of Condenser Fin Tubes of Package Type Air Conditioner for Navy Vessel
함정용 패키지 에어콘 응축기 핀튜브(Cu-Ni 70/30) 누설파괴 원인 분석

박형훈;황양진;이규환;
[Park, Hyoung Hun;Hwang, Yang Jin;Lee, Kyu Hwan;]

국방기술품질원 부산센터;재료연구소 표면기술연구본부;
Busan Center, Defense Agency for Technology and Quality;Surface Technology Division, Korea Institute of Materials Science Changwon;

한국표면공학회지, Vol. 49, No. 5, pp. 439-446.

DOI : 10.5695/JKISE.2016.49.5.439

Process Optimization for Life Extension of Electropolishing Solution using Half Round Bus Bar
반구형 부스바를 이용한 전해연마액 수명연장을 위한 공정 최적화

김수한;이승헌;조재훈;임동하;최중소;박철환;
[Kim, Soo Han;Lee, Seung Heon;Cho, Jaehoon;Lim, Dong-Ha;Choi, Joongso;Park, Chulhwan;]

광운대학교 화학공학과;한국생산기술연구원 그린공정소재그룹;한국생산기술연구원 에너지플랜트그룹;
Department of Chemical Engineering, Kwangwoon University;Green Process and Materials R&D Group, Korea Institute of Industrial Technology (KITECH);Energy Plant Group, Korea Institute of Industrial Technology (KITECH);

한국표면공학회지, Vol. 49, No. 5, pp. 447-453.

DOI : 10.5695/JKISE.2016.49.5.447

Effect of the Coating Structure on the Corrosion Resistance of Al-Mg Coated Steel
Al-Mg 코팅층의 구조가 강판 내식성에 미치는 영향

정재훈;양지훈;김성환;변인섭;정재인;이명훈;
[Jung, Jae-Hun;Yang, Ji-Hoon;Kim, Sung-Hwan;Byeon, In-Seop;Jeong, Jae-In;Lee, Myeong-Hoon;]

포항산업과학연구원 소재이용연구그룹;한국해양대학교;
Materials Solution Research Group, Research Institute of Industrial Science & Technology;Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 5, pp. 454-460.

DOI : 10.5695/JKISE.2016.49.5.454

Microstructure, Crystal Structure and Mechanical Properties of VN Coatings Using Asymmetric Bipolar Pulsed dc Sputtering
비대칭 바이폴라 펄스 스퍼터법으로 증착된 VN 코팅막의 미세구조, 결정구조 및 기계적 특성에 관한 연구

전성용;정평근;
[Chun, Sung-Yong;Jeong, Pyeong-Geun;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 49, No. 5, pp. 461-466.

DOI : 10.5695/JKISE.2016.49.5.461

Analysis of the Na Gettering in PSG/SiO₂/Al-1%Si Multilevel Thin Films using XPS and SIMS
XPS와 SIMS를 이용한 PSG/SiO₂/Al-1%Si 적층 박막내의 Na 게터링 분석

김진영;
[Kim, Jin Young;]

광운대학교 전자재료공학과;
Department of Electronic Materials Engineering, Kwangwoon University;

한국표면공학회지, Vol. 49, No. 5, pp. 467-471.

DOI : 10.5695/JKISE.2016.49.5.467

Synthesis of Aligned ZnO Nanorod Arrays via Hydrothermal Route
수열합성법에 의한 정렬된 ZnO 나노로드 구조의 합성

구진희;이병우;
[Koo, Jin Heui;Lee, Byeong Woo;]

한국해양대학교 기계공학부;
Division of Mechanical Engineering, Korea Maritime and Ocean University;

한국표면공학회지, Vol. 49, No. 5, pp. 472-476.

DOI : 10.5695/JKISE.2016.49.5.472

Recovery of Valuable Metal from e-Wasted Electronic Devices
폐전자부품에서 유가금속 회수기술

김유상;
[Kim, Yu-Sang;]

한국과학기술정보연구원 ReSEAT;
ReSEAT Program, Korea Institute of Science and Technology Information (KISTI);

한국표면공학회지, Vol. 49, No. 6, pp. 477-485.

DOI : 10.5695/JKISE.2016.49.6.477

Formation of One-dimensional Nb₂O₅ Nanostructures by Anodization

[Lee, Kiyoung;]

School of Nano & Materials Science and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 49, No. 6, pp. 486-489.

DOI : 10.5695/JKISE.2016.49.6.486

Development of Inverted Organic Photovoltaics with Anion doped ZnO as an Electron Transporting Layer

[Jeong, Jae Hoon;Hong, Kihyon;Kwon, Se-Hun;Lim, Dong Chan;]

Electrochemical Department, Surface Technology Division, Korea Institute of Materials Science (KIMS);School of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 49, No. 6, pp. 490-497.

DOI : 10.5695/JKISE.2016.49.6.490

Electrochemical stability of La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ as a cathode for SOFC

[Oh, Mi-Young;Jeong, Yong-Hoon;Oh, Se-Woong;]

R&D Education Center for Fuel Cell Materials & Systems, Chonbuk National University;Biomaterial Team, Dept. of Research & Development Medical Device Development Center / Osong Medical Innovation Foundation;Material of Engineering College LINC, Chosun University;

한국표면공학회지, Vol. 49, No. 6, pp. 498-506.

DOI : 10.5695/JKISE.2016.49.6.498

Sintering Behavior of Ag-Ni Electrode Powder with Core-shell Structure

[Kim, Kyung Ho;Koo, Jun-Mo;Ryu, Sung-Soo;Yoon, Sang Hun;Han, Yoon Soo;]

Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology;Munmoo CO., LTD.;

한국표면공학회지, Vol. 49, No. 6, pp. 507-512.

DOI : 10.5695/JKISE.2016.49.6.507

Improvement of Hot Dip Galvanizing Process by Additive to Flux Solution
플럭스액의 첨가제에 의한 용융아연도금 공정개선

문경만;정재현;박준무;이명훈;백태실;
[Moon, Kyung-Man;Jeong, Jae-Hyun;Park, Jun-Mu;Lee, Myeong-Hoon;Baek, Tae-Sil;]

한국해양대학교 공과대학 조선기자재공학부;한국해양대학교 공과대학 기계에너지시스템공학부;한국해양대학교 해사대학 기관공학부;포항대학교 제철산업과;
Dept. of Marine Equipment Engineering, Korea Maritime and Ocean University;Dept. of Mechanical & Energy Systems Engineering, Korea Maritime and Ocean University;Dept. of Marine Engineering, Korea Maritime and Ocean University;Dept. of Steel Industry, Pohang College;

한국표면공학회지, Vol. 49, No. 6, pp. 513-520.

DOI : 10.5695/JKISE.2016.49.6.513

Study of Hydrogen Evolution Reaction by Molybdenum Oxide Doped TiO₂ Nanotubes
몰리브덴 산화물이 도핑된 티타늄 나노튜브전극의 수소 발생 반응 연구

오기석;유현석;이기백;최진섭;
[Oh, Kiseok;Yoo, Hyeonseok;Lee, Gibaek;Choi, Jinsub;]

인하대학교 화학.화학공학융합학과;
Department of Chemistry and Chemical Engineering, Inha University;

한국표면공학회지, Vol. 49, No. 6, pp. 521-529.

DOI : 10.5695/JKISE.2016.49.6.521

Formation of Metal Electrode on Si₃N₄ Substrate by Electrochemical Technique
전기화학 공정을 이용한 질화규소 기판 상의 금속 전극 형성에 관한 연구

신성철;김지원;권세훈;임재홍;
[Shin, Sung-Chul;Kim, Ji-Won;Kwon, Se-Hun;Lim, Jae-Hong;]

한국기계연구원 부설 재료연구소(KIMS) 표면기술본부;부산대학교 재료공학과;
Surface Technology Division Korea, Institute of Materials Science;Dept. of Materials Science & Engineering, Pusan National University;

한국표면공학회지, Vol. 49, No. 6, pp. 530-538.

DOI : 10.5695/JKISE.2016.49.6.530

Synthesis and Characterization of CuCo₂O₄ Nanofiber Electrocatalyst for Oxygen Evolution Reaction
산소발생반응을 위한 CuCo₂O₄ 나노섬유 전기화학 촉매 합성 및 특성 분석

원미소;장명제;이규환;김양도;최승목;
[Won, Mi So;Jang, Myeong-Je;Lee, Kyu Hwan;Kim, Yang Do;Choi, Sung Mook;]

한국기계연구원부설 재료연구소 표면기술연구본부;부산대학교 재료공학과;
Surface Technology Division, Korea Institute of Materials Science (KIMS);Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 49, No. 6, pp. 539-548.

DOI : 10.5695/JKISE.2016.49.6.539

Effect of Mechanical and Electrochemical Surface Treatments on Aluminium-Epoxy Adhesive Strength
기계적/전기화학적 표면처리가 알루미늄-에폭시의 접합강도 향상에 미치는 영향

정원섭;김도형;
[Chung, Won-Sub;Kim, Do-Hyung;]

부산대학교 재료공학과;
Departments of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 49, No. 6, pp. 549-554.

DOI : 10.5695/JKISE.2016.49.6.549

Micropatterning on Biodegradable Nanofiber Scaffolds by Femtosecond Laser Ablation Process
펨토초 레이저 절삭 공정을 이용한 생분해성 나노섬유 표면 미세 패터닝 공정

정용우;전인동;김유찬;석현광;정석;전호정;
[Chung, Yongwoo;Jun, Indong;Kim, Yu-Chan;Seok, Hyun-Kwang;Chung, Seok;Jeon, Hojeong;]

한국과학기술연구원 생체재료연구단;고려대학교 마이크로나노시스템;
Center for Biomaterials, Biomedical Research Institute, Korea Institute of Science and Technology;School of Mechanical Engineering, Korea University;

한국표면공학회지, Vol. 49, No. 6, pp. 555-559.

DOI : 10.5695/JKISE.2016.49.6.555

Porcelain Bonding Strength and Mechanical Properties of Sintered Ni-Cr-Ti Alloy for Dental Prosthodontics
치과보철용 Ni-Cr-Ti 소결체합금의 포셀린결합력 및 기계적 특성

최한철;박선영;심명섭;
[Choe, Han-Cheol;Park, Seon-Yeong;Shim, Myung-Sub;]

조선대학교 치과대학 치과재료학교실;조선대학교 LINC사업단;
Department of Dental Materials, College of Dentistry, Chosun University;Leaders in Industry-university Cooperation, Chosun University;

한국표면공학회지, Vol. 49, No. 6, pp. 560-566.

DOI : 10.5695/JKISE.2016.49.6.560

Improvement of Sealing Property of Electrostatic Chuck by Applying Polysilazane Sealant
폴리실라잔계 실란트를 이용한 정전척 실링특성 향상 연구

최재영;박현수;손민규;정창오;김우병;
[Choi, Jaeyoung;Park, Hyunsu;Son, Min Kyu;Jeong, Chang-oh;Kim, Woo-Byoung;]

단국대학교 에너지공학과;와이엠씨 (주) 기술연구소;
Department of Energy Engineering, Dankook University;R&D Center, YMC Co., Ltd;

한국표면공학회지, Vol. 49, No. 6, pp. 567-574.

DOI : 10.5695/JKISE.2016.49.6.567

Thin Metal Meshes for Touch Screen Panel Prepared by Photolithography
포토리소그래피 공정으로 제작된 터치스크린패널용 금속메시

김서한;송풍근;
[Kim, Seo-Han;Song, Pung-Keun;]

부산대학교 재료공학과;
Department of Materials Science and Engineering, Pusan National University;

한국표면공학회지, Vol. 49, No. 6, pp. 575-579.

DOI : 10.5695/JKISE.2016.49.6.575

Effect of Si Content on the Phase Formation Behavior and Surface Properties of the Cr-Si-Al-N Coatings
Cr-Si-Al-N 코팅의 상형성 및 표면 물성에 미치는 Si 함량의 영향

최선아;김형순;김성원;;김형태;오윤석;
[Choi, Seon-A;Kim, Hyung-Sun;Kim, Seong-Won;Lee, Sungmin;Kim, Hyung-Tae;Oh, Yoon-Suk;]

한국세라믹기술원 엔지니어링 세라믹 센터;인하대학교 신소재공학과;
Engineering Ceramic Center, Korea Institute of Ceramic Engineering and Technology;Department of Materials Science and Engineering, Inha University;

한국표면공학회지, Vol. 49, No. 6, pp. 580-586.

DOI : 10.5695/JKISE.2016.49.6.580

The Effect of Nitriding/DLC Coating on the High Cycle Fatigue Properties of Fe-3.0Ni-0.7Cr-1.4Mn-X Steel
Fe-3.0Ni-0.7Cr-1.4Mn-X강의 고주기피로특성에 미치는 질화/DLC코팅의 영향

장재철;김송희;
[Jang, Jae Cheol;Kim, Song-Hee;]

서울대학교 재료공학부;강원대학교 나노응용공학과;
School of Materials Science and Engineering, Seoul National University;Department of Nano Applied Engineering, Kangwon National University;

한국표면공학회지, Vol. 49, No. 6, pp. 587-594.

DOI : 10.5695/JKISE.2016.49.6.587

Fabrication and Characteristics of Thermal Barrier Coatings in the La₂O₃-Gd₂O₃-ZrO₂ System by Using Suspension Plasma Spray with Different Suspension Preparations
서스펜션의 준비방법에 따른 서스펜션 플라즈마 용사를 이용한 La₂O₃-Gd₂O₃-ZrO₂ 계 열차폐코팅의 제조와 특성

이소율;이성민;오윤석;김형태;남산;김성원;
[Lee, Soyul;Lee, Sung-Min;Oh, Yoon-Suk;Kim, Hyung-Tae;Nahm, Sahn;Kim, Seongwon;]

한국세라믹기술원 이천분원 엔지니어링세라믹센터;고려대학교 신소재공학과;
Engineering Ceramics Center, Korea Institute of Ceramic Engineering and Technology;Department of Materials Science and Engineering, Korea University;

한국표면공학회지, Vol. 49, No. 6, pp. 595-603.

DOI : 10.5695/JKISE.2016.49.6.595

Phase Formation and Thermal Diffusivity of Thermal Barrier Coatings of La₂Zr₂O₇, (La_0.5Gd_0.5)₂Zr₂O₇, Gd₂Zr₂O₇ Fabricated by Suspension Plasma Spray
서스펜션 플라즈마 용사법으로 제조한 La₂Zr₂O₇, (La_0.5Gd_0.5)₂Zr₂O₇, Gd₂Zr₂O₇ 열차폐코팅의 상형성과 열전도 특성

김선주;이성민;오윤석;김형태;장병국;김성원;
[Kim, Sun-Joo;Lee, Sung-Min;Oh, Yoon-Suk;Kim, Hyung-Tae;Jang, Byung-Koog;Kim, Seongwon;]

한국세라믹기술원 이천분원 엔지니어링세라믹센터;물질재료연구기구 구조재료연구센터;
Engineering Ceramics Center, Korea Institute of Ceramic Engineering and Technology;Research Center for Structural Materials, National Institute for Materials;

한국표면공학회지, Vol. 49, No. 6, pp. 604-611.

DOI : 10.5695/JKISE.2016.49.6.604