Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403


공학

A Study on Characteristics of the Ni-Pd Alloy Electroplating
Ni-Pd 합금 전해도금의 특성에 관한 연구

조은상;정대곤;조진기;
[Cho, Eun-Sang;Jung, Dae-Gon;Cho, Jin-Ki;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 48, No. 6, pp. 253-259.

DOI : 10.5695/JKISE.2015.48.6.253

Effect of Heat Treatment on Interface Behavior in Ni-P/Cr Double Layer
열처리 시간에 따른 Ni-P/Cr 이중 도금 층의 계면 거동에 관한 연구

최명희;박영배;이병호;변응선;이규환;
[Choi, Myung-Hee;Park, Young-Bae;Rhee, Byong-ho;Byon, Eungsun;Lee, Kyu Hwan;]

한국기계연구원 부설 재료 연구소 표면기술연구본부;국립안동대학교 신소재공학부 청정에너지소재기술연구센터;주식회사 비츠로테크;
Surface Technology Division, Korea Institute of Materials Science;School of Materials Science and Engineering, Andong National University;VITZROTECH Co., Ltd.;

한국표면공학회지, Vol. 48, No. 6, pp. 260-268.

DOI : 10.5695/JKISE.2015.48.6.260

The Effects of Gas Compositions During Post Nitriding on the AISI 316L Stainless Steel after Plasma Carburizing

[Lee, Insup;]

Department of Advanced Materials Engineering, Dongeui University;

한국표면공학회지, Vol. 48, No. 6, pp. 269-274.

DOI : 10.5695/JKISE.2015.48.6.269

Investigating the Cause of Hindrance to the Interfacial Bonding of INCONEL 718 Layer Deposited by Kinetic Spray Process
저온 분사 공정을 이용해 적층된 INCONEL 718의 계면접합 저해요인 분석

김재익;이승태;이창희;
[Kim, Jaeick;Lee, Seungtae;Lee, Changhee;]

한양대학교 신소재공학과 저온 분사 코팅 연구실;
Kinetic Spray Coating Laboratory (NRL), Division of Materials Science and Engineering, Hanyang University;

한국표면공학회지, Vol. 48, No. 6, pp. 275-282.

DOI : 10.5695/JKISE.2015.48.6.275

Effects of TiN Coating on the Fatigue Fracture of Dental Implant System with Various Cyclic Loads

[Jung, Da-Un;Chung, Chae-Heon;Son, Mee-Kyoung;Choe, Han-Cheol;]

Prosthetic Dentistry, SMG-SNU Borame Medical Center;Department of Prosthodontics, College of Dentistry, Chosun University;Department of Dental Materials, Research Center of Nano-Interface Activation for Biomaterials, & Research Center for Oral Disease Regulation of the Aged, College of Dentistry, Chosun University;

한국표면공학회지, Vol. 48, No. 6, pp. 283-291.

DOI : 10.5695/JKISE.2015.48.6.283

Structural and Optical Properties of ITZO Deposited by RF Magnetron Sputtering
RF 마그네트론 스퍼터링 법으로 제작한 ITZO 박막의 구조 및 광학적 특성

김동렬;배지환;황동현;손영국;
[Kim, Dong Ryeol;Bae, Ji Hwan;Hwang, Dong Hyun;Son, Young Guk;]

부산대학교 재료공학부;신라대학교 신소재공학과;
Department of Materials Science and Engineering, Pusan National University;Department of Materials Science and Engineering, Silla University;

한국표면공학회지, Vol. 48, No. 6, pp. 292-296.

DOI : 10.5695/JKISE.2015.48.6.292

Heat Spreading Properties of CVD Diamond Coated Al Heat Sink
CVD 다이아몬드가 코팅된 알루미늄 방열판의 방열 특성

윤민영;임종환;강찬형;
[Yoon, Min Young;Im, Jong Hwan;Kang, Chan Hyoung;]

한국산업기술대학교 신소재공학과;
Department of Advanced Materials Engineering, Korea Polytechnic University;

한국표면공학회지, Vol. 48, No. 6, pp. 297-302.

DOI : 10.5695/JKISE.2015.48.6.297

NO2 Sensing Properties of β-Bi2O3 Nanowires Sensor Coated with Pd Nanoparticles
Pd 나노입자가 코팅된 β-Bi2O3 나노와이어의 NO2 검출 특성

박성훈;강우승;
[Park, Sunghoon;Kang, Wooseung;]

인하대학교 신소재공학과;인하공업전문대학 금속재료과;
Department of Materials Science & Engineering, Inha University;Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 48, No. 6, pp. 303-308.

DOI : 10.5695/JKISE.2015.48.6.303

Hydrogen Sensing Properties of Multiwall Carbon Nanotubes Decorated with TiO2 Nanoparticles at Room Temperature
TiO2 나노입자가 코팅된 다중 벽 탄소 나노튜브의 상온에서의 수소 가스 검출 특성

박성훈;강우승;
[Park, Sunghoon;Kang, Wooseung;]

인하대학교 신소재공학과;인하공업전문대학 금속재료과;
Department of Materials Science & Engineering, Inha University;Department of Metallurgical & Materials Engineering, Inha Technical College;

한국표면공학회지, Vol. 48, No. 6, pp. 309-314.

DOI : 10.5695/JKISE.2015.48.6.309

Fabrication and Characterization of La2Zr2O7/YSZ Double-Ceramic-Layer Thermal Barrier Coatings Fabricated by Suspension Plasma Spray
서스펜션 플라즈마 용사법을 이용한 La2Zr2O7/YSZ 2층세라믹 열차폐코팅의 제조와 특성평가

권창섭;이수진;이성민;오윤석;김형태;장병국;김성원;
[Kwon, Chang-Sup;Lee, Sujin;Lee, Sung-Min;Oh, Yoon-Suk;Kim, Hyung-Tae;Jang, Byung-Koog;Kim, Seongwon;]

한국세라믹기술원 이천분원 엔지니어링세라믹팀;물질.재료연구기구(NIMS) 선진고온재료유닛트;
Engineering Ceramic Team, Korea Institute of Ceramic Engineering and Technology;High Temperature Materials Unit, National Institute for Materials Science;

한국표면공학회지, Vol. 48, No. 6, pp. 315-321.

DOI : 10.5695/JKISE.2015.48.6.315

Diffusion Behaviors and Electrical Properties in the In-Ga-Zn-O Thin Film Deposited by Radio-frequency Reactive Magnetron Sputtering

[Lee, Seok Ryeol;Choi, Jae Ha;Lee, Ho Seong;]

Analytical Technology Team, LG display;School of Materials Science and Engineering, Kyungpook National University;

한국표면공학회지, Vol. 48, No. 6, pp. 322-328.

DOI : 10.5695/JKISE.2015.48.6.322

The Influence of Heat Treatment Temperature on Microstructure and Corrosion Behavior of SDSS Tube
SDSS (Super Duplex Stainless Steel) 강관의 미세조직 및 부식특성에 미치는 열처리 온도의 영향

이인섭;천창석;임태홍;한윤호;이면학;
[Lee, Insup;Cheon, Chang-seok;Yim, Tai-Hong;Han, Yoon-Ho;Lee, Myon-Hag;]

동의대학교 신소재공학과;한국생산기술연구원;(주)트리스;
Department of Advanced Materials Engineering, Dongeui university;Korea Institute of Industrial Technology;TRIS;

한국표면공학회지, Vol. 48, No. 6, pp. 329-334.

DOI : 10.5695/JKISE.2015.48.6.329

Characteristics of GMA Weld Zone on TiO2 Different Component Flux Cored Wire for S500 Grade Steel
TiO2 성분 플럭스충진와이어에 따른 S500강의 GMA 용접부 특성

유철;고영봉;박경채;
[Yoo, Cheol;Ko, Young-Bong;Park, Kyeung-Chae;]

현대종합금속 기술연구소;한국화학융합시험연구원;경북대학교 공과대학 신소재공학과;
Technical Institute of Hyundai Welding Co., LTD.;Korea Testing & Research Institute (KTR);Dept. of Materials Science and Metallurgical Engineering, Kyungpook National University;

한국표면공학회지, Vol. 48, No. 6, pp. 335-342.

DOI : 10.5695/JKISE.2015.48.6.335

Electrochemical Characteristics of Arc Zn Thermal Spray Coating Layer in Sea Water
해수 내 아크 아연 용사코팅 층의 전기화학적 특성

박일초;서광철;이경우;김성종;
[Park, Il-Cho;Seo, Gwang-Cheol;Lee, Gyeong-Woo;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;목포해양대학교 조선해양공학과;
Division of Marine Engineering, Mokpo National Maritime University;Department of Naval Archltecture and Ocean Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 48, No. 6, pp. 343-348.

DOI : 10.5695/JKISE.2015.48.6.343

Cavitation Damage Behavior of Inconel 625 Coating Layer by Arc Thermal Spraying Method in Sea Water
아크 용사법을 이용한 Inconel 625 코팅 층의 해수 내 캐비테이션 손상 거동

박일초;김성종;
[Park, Il-Cho;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo National Maritime University;

한국표면공학회지, Vol. 48, No. 6, pp. 349-353.

DOI : 10.5695/JKISE.2015.48.6.349

Evaluation of Electrochemical Corrosion Characteristics for Hot-Dip Aluminized 304 Stainless Steel in Seawater
알루미늄 용융 도금된 304 스테인리스강의 해수 내 전기화학적 부식 특성 평가

정상옥;박일초;한민수;김성종;
[Chong, Sang-Ok;Park, Il-Cho;Han, Min-Su;Kim, Seong-Jong;]

목포해양대학교 기관시스템공학부;
Division of Marine Engineering, Mokpo Maritime University;

한국표면공학회지, Vol. 48, No. 6, pp. 354-359.

DOI : 10.5695/JKISE.2015.48.6.354

Application of Pulsed Plasmas for Nanoscale Etching of Semiconductor Devices : A Review
나노 반도체 소자를 위한 펄스 플라즈마 식각 기술

양경채;박성우;신태호;염근영;
[Yang, Kyung Chae;Park, Sung Woo;Shin, Tae Ho;Yeom, Geun Young;]

성균관대학교 신소재공학부;
School of Advanced Materials Science and Engineering, SungKyunKwan University (SKKU);

한국표면공학회지, Vol. 48, No. 6, pp. 360-370.

DOI : 10.5695/JKISE.2015.48.6.360