Effects of Electrodeposition Conditions on Properties of Ni Thin Films Electrodeposited from Baths Fabricated by Dissolving Metal Ni Powders
금속 Ni 분말을 용해한 도금용액으로부터 전기도금 된 Ni 박막 특성에 미치는 도금조건의 영향
윤필근;박근용;엄영랑;최선주;박덕용;
[Yoon, Pilgeun;Park, Keun-Yong;Uhm, Young Rang;Choi, Sun Ju;Park, Deok-Yong;]
한밭대학교 신소재공학과;한국원자력연구원 동위원소 이용기술 개발부;
Department of Advanced Materials Engineering, Hanbat National University;Korea Atomic Energy Research Institute;
한국표면공학회지, Vol. 48, No. 3, pp. 73-81.
Synthesis and Photoluminescence Properties of Dy3+- and Eu3+-codoped CaMoO4 Phosphors
Dy3+와 Eu3+ 이온이 동시 도핑된 CaMoO4 형광체의 합성과 발광 특성
김준한;조신호;
[Kim, Junhan;Cho, Shinho;]
신라대학교 신소재공학과;
Department of Materials Science and Engineering, Silla University;
한국표면공학회지, Vol. 48, No. 3, pp. 82-86.
Corrosion Properties of Carbon-Coated Metallic Bipolar Plate for PEMFC
고분자 전해질 연료전지 금속 분리판 적용을 위한 탄소 박막의 증착과 내식성 평가
장동수;이정중;
[Jang, Dong-Su;Lee, Jung-Joong;]
서울대학교 재료공학부;
Department of Materials Science and Engineering, Seoul National University;
한국표면공학회지, Vol. 48, No. 3, pp. 87-92.
The Joining Quality of High Strength Bolt, Nut and Washer Set (S10T & 10.9HRC) under the Surface Treatment Conditions
표면처리별 S10T, 10.9HRC 고장력 볼트 세트의 체결 품질 연구
최윤오;석한길;홍현선;
[Choi, Youn-O;Suk, Han-Gil;Hong, Hyeon-Sun;]
KPF(주) 품질보증부;강원대학교 재료금속공학과;성신여자대학교 청정융합과학과;
Quality Assurance Team, Korea Parts & Fasteners (KPF) Co., Ltd.;Department of Materials and Metallurgical Engineering, Kangwon National University;Department of Interdisciplinary ECO Science, Sungshin Women`s University;
한국표면공학회지, Vol. 48, No. 3, pp. 93-99.
Effect of Phosphorous Acid Concentration on Mechanical Properties of Ni-P Electrodeposits
니켈-인 도금 층의 기계적 성질에 미치는 아인산 농도의 영향
강수영;양승기;황운석;
[Kang, Soo Young;Yang, Seung gi;Hwang, Woon suk;]
인하공업전문대학 금속재료과;인하대학교 신소재공학부;
Dept. of Metallurgical & Material Engineering, Inha Technical College;School of materials Science and engineering, Inha University;
한국표면공학회지, Vol. 48, No. 3, pp. 100-104.
Emission Characteristics of Multi-Tandem OLED using MoOx with CGL
CGL 층으로 MoOx를 사용한 다중 적층구조 OLED의 발광 특성
김지현;주성후;
[Kim, Ji-Hyun;Ju, Sung-Hoo;]
대진대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 3, pp. 105-109.
Aluminizing and Corrosion of Carbon Steels in N2/0.5%H2S Gas at 650-850℃
[Abro, Muhammad Ali;Lee, Dong Bok;]
School of Advanced Materials Science & Engineering, Sungkyunkwan University;
한국표면공학회지, Vol. 48, No. 3, pp. 110-114.
White Tandem Organic Light-Emitting Diodes Using Red and Blue Fluorescent Materials
적색과 청색 형광 물질을 사용한 백색 적층 OLED
박찬석;공도훈;강주현;윤성혁;주성후;
[Park, Chan-Suk;Kong, Do-Hun;Kang, Ju-Hyun;Yun, Sung-Hyuk;Ju, Sung-Hoo;]
대진대학교 신소재공학과;
Department of Advanced Materials Science & Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 3, pp. 115-120.
Emission Characteristics of Blue Fluorescent OLED with Anode Materials
양극 물질에 따른 청색 형광 OLED의 발광 특성
공도훈;이요셉;주성후;양재웅;
[Kong, Do-Hoon;Lee, Yo-Seb;Ju, Sung-Hoo;Yang, Jae-Woong;]
대진대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Daejin University;
한국표면공학회지, Vol. 48, No. 3, pp. 121-125.
[Kim, Yeonwon;]
Division of Marine Engineering, Korea Maritime University;
한국표면공학회지, Vol. 48, No. 3, pp. 126-130.