Korean Institute of Surface Engineering

pISSN : 1225-8024 | eISSN : 3399-8403

논문보관실

View abstract-All view abstract-Selected Cancel

공학

A Study of pH, Duty Cycle, Agitation on the Property of Co-deposited TiO2 and Thermal Stability in the Electrodeposited Ni-TiO2 Composite
pH, duty cycle, 교반, 첨가제가 Ni-TiO2 전기도금 복합체의 TiO2 공석특성과 열적안정성에 미치는 영향 연구

김명진;김정수;김동진;김홍표;황성식;
[Kim, Myong-Jin;Kim, Joung-Soo;Kim, Dong-Jin;Kim, Hong-Pyo;Hwang, Seong-Sik;]

한국원자력연구원 원자력재료기술개발부;
Nuclear Materials Research Division, Korea Atomic Energy Research Institute;

한국표면공학회지, Vol. 45, No. 3, pp. 97-105.

DOI : 10.5695/JKISE.2012.45.3.097

Properties of TiN Films Fabricated by Oblique Angle Deposition
빗각 증착으로 제조된 TiN 박막의 특성

정재훈;양지훈;박혜선;송민아;정재인;
[Jung, Jae-Hun;Yang, Ji-Hoon;Park, Hye-Sun;Song, Min-A;Jeong, Jae-In;]

포항산업과학연구원 융합소재연구본부;
Hybrid Materials Research Department, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 45, No. 3, pp. 106-110.

DOI : 10.5695/JKISE.2012.45.3.106

Characteristics of Al Films Prepared by Oblique Angle Deposition
빗각 증착으로 제조한 Al 박막의 특성

박혜선;양지훈;정재훈;송민아;정재인;
[Park, Hye-Sun;Yang, Ji-Hoon;Jung, Jae-Hun;Song, Min-A;Jeong, Jae-In;]

포항산업과학연구원 융합소재연구본부;
Hybrid Materials Research Department, Research Institute of Industrial Science & Technology;

한국표면공학회지, Vol. 45, No. 3, pp. 111-116.

DOI : 10.5695/JKISE.2012.45.3.111

Effect of Annealing on the Electrical Property and Water Permeability of ZTO/GZO Double-layered TCO Films Deposited by DC, RF Magnetron Co-sputtering
DC, RF 마그네트론 코스퍼터링법으로 증착한 ZTO/GZO 투명전도성막의 열처리 조건이 박막의 물성에 미치는 영향

오성훈;강세원;이건환;정우석;송풍근;
[Oh, Sung-Hoon;Kang, Sae-Won;Lee, Gun-Hwan;Jung, Woo-Seok;Song, Pung-Keun;]

부산대학교 재료공학부;한국기계연구원 재료연구소;한국전자통신연구원;
Department of Materials Science and Engineering, Pusan National University;Korea Institute of Materials Science (KIMS);Electronics and Telecommunications Research Institute (ETRI);

한국표면공학회지, Vol. 45, No. 3, pp. 117-122.

DOI : 10.5695/JKISE.2012.45.3.117

A Comparative Study of CrN Coatings Deposited by DC and Inductively Coupled Plasma Magnetron Sputtering
DC 스퍼터법과 유도결합 플라즈마 마그네트론 스퍼터법으로 증착된 CrN 코팅막의 물성 비교연구

서대한;전성용;
[Seo, Dae-Han;Chun, Sung-Yong;]

목포대학교 신소재공학과;
Department of Advanced Materials Science and Engineering, Mokpo National University;

한국표면공학회지, Vol. 45, No. 3, pp. 123-129.

DOI : 10.5695/JKISE.2012.45.3.123

The Change of Microstructures According to the Charging Amounts of Hydrogen in High Strength DP Steels and TRIP Steel
고강도 DP강과 TRIP강의 표면 수소 주입량에 따른 수소취성평가

이철치;박재우;강계명;
[Lee, Chul-Chi;Park, Jae-Woo;Kang, Kae-Myung;]

서울과학기술대학교 산업대학원 재료공학과;서울과학기술대학교 에너지환경대학원 신에너지공학과;서울과학기술대학교 신소재공학과;
Dept. of Materials Science and Engineering, The Graduate School of Industry & Engineering, SNUST;Dept. of New Energy Engineering, The Graduate School of Energy & Environment, SNUST;Dept. of Materials Science & Engineering, SNUST;

한국표면공학회지, Vol. 45, No. 3, pp. 130-135.

DOI : 10.5695/JKISE.2012.45.3.130

Composition Analysis and Thermodynamic Care for Replication of Ancient Metallic Type
고대 금속활자의 복제를 위한 성분분석과 열역학적 주의 점

김기호;
[Kim, Ki-Ho;]

충북대학교 신소재공학과;
Department of New Materials Eng., Chungbuk National University;

한국표면공학회지, Vol. 45, No. 3, pp. 136-141.

DOI : 10.5695/JKISE.2012.45.3.136