Effects of Reactive Gas Addition on the Mechanical Property and Water Permeability of IZO Films Deposited by DC Sputtering for Application to Flexible OLED
DC 마그네트론 스퍼터로 증착한 flexible OLED용 IZO 박막의 기계적 특성과 투습특성에 미치는 반응성 가스 첨가의 효과
천고은;이동엽;조영래;송풍근;
[Cheon, Ko-Eun;Lee, Dong-Yeop;Cho, Young-Rae;Song, Pung-Keun;]
부산대학교 재료공학부;
School of Materials Science and Engineering, Pusan National University;
한국표면공학회지, Vol. 40, No. 6, pp. 245-249.
Duplex Surface Treatments of Plasma Nitrocarburizing and Plasma Oxidation of SKD 11 Steel
[Lee, In-Sup;Jeong, Kwang-Ho;Cho, Young-Rae;]
Department of Advanced Materials Engineering, Dongeui University;Division of Materials Science & Engineering, Pusan National University;
한국표면공학회지, Vol. 40, No. 6, pp. 250-253.
A Study on Microstructure, Mechanical Properties, Friction and Adhesion of TiN Thin Films Coated on SKD61 and Radical Nitrided SKD61 Substrates by Arc Ion Plating
SKD61과 Radical Nitriding 처리된 SKD61 기판상에 Arc Ion Plating으로 증착된 TiN 박막의 미세구조 및 기계적 특성, 마찰 및 접착력에 관한 연구
주윤곤;윤재홍;방위;장세굉;조동율;하성식;
[Joo, Yun-Kon;Yoon, Jae-Hong;Fang, Wei;Zhang, Shi-Hong;Cho, Tong-Yul;Ha, Sung-Sik;]
창원대학교 나노신소재공학부;(주)한국제강;
Dept. of Nano and Advanced Materials Engineering, Changwon National Univ.;Han Kook Steel & Mill Co., Ltd.;
한국표면공학회지, Vol. 40, No. 6, pp. 254-257.
Growth Characteristics of SnO2 Thin Film for Gas Sensor with Annealing Treatment
어닐링처리시킨 SnO2 가스센서의 박막성장특성
강계명;최종운;
[Kang, Kae-Myung;Choi, Jong-Un;]
서울산업대 신소재공학과;
Dept. of Mater. Sci. and Engineering, Seoul National University of Technology;
한국표면공학회지, Vol. 40, No. 6, pp. 258-261.
Investigation on Optimum Protection Potential Decision of Al Alloy(5083F) in Sea Water by Impressed Current Cathodic Protection
해수 환경하에서 알루미늄합금(5083F)의 외부전원법에 의한 최적 방식전위 결정에 관한 연구
김성종;감정일;김종신;
[Kim, Seong-Jong;Kim, Jeong-Il;Kim, Jong-Shin;]
목포해양대학교;한국선급;
Division of Marine System Engineering, Mokpo Maritime University;Korea Register;
한국표면공학회지, Vol. 40, No. 6, pp. 262-270.
Development of Chemical Decontamination Process of Stainless Steel for Reactor Coolant Pump(II)
원자로 냉각재 펌프용 스테인리스강에 대한 화학적 제염 공정 개발(II)
김성종;김정일;김기준;
[Kim, Seong-Jong;Kim, Jeong-Il;Kim, Ki-Joon;]
목포해양대학교;한국해양대학교;
Division of Marine System Engineering, Mokpo Maritime University;Division of Marine System Engineering, Korea Maritime University;
한국표면공학회지, Vol. 40, No. 6, pp. 271-278.
Microstructure and Mechanical Properties of Cr-Mo-Si-C-N Coatings Deposited by a Hybrid Coating System
하이브리드 코팅시스템에 의해 제조된 Cr-Mo-Si-C-N 박막의 미세구조 및 기계적 특성연구
윤지환;안성규;김광호;
[Yun, Ji-Hwan;Ahn, Sung-Kyu;Kim, Kwang-Ho;]
부산대학교 재료공학과;부산대학교 국가핵심연구센터;
Division of Materials Science and Engineering, Pusan National University;National Core Research Center for Hybrid Materials Solution Materials, Pusan National University;
한국표면공학회지, Vol. 40, No. 6, pp. 279-282.